SirisXm UNBMARSOHU Marine Headunit User Manual

June 16, 2024
SirisXm

SirisXm UNBMARSOHU Marine Headunit

Unbranded Marine Headunit

Specifications

  • Compliance : Part 15 of the FCC Rules
  • License-exempt transmitter(s)/receiver(s) complying with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s)
  • Operation Conditions : Must not cause harmful interference and must accept any interference received
  • Consult the dealer or an experienced radio/TV technician for assistance
  • CAN ICES-003 (B) / NMB-003 (B) and NM EA2000 certified
  • Radiation Exposure : Complies with FCC radiation exposure limits for an uncontrolled environment
  • Minimum distance of 20 cm between the radiator and the body
  • Must not be colocated or operate with any other antenna or transmitter
  • Made for Apple and Works with Apple certified
  • iPad, iPad Air, iPad Pro, and iPhone are trademarks of Apple Inc.
  • Compliance : RSS-102 radiation exposure limits for an uncontrolled environment
  • HARMAN International Industries, Incorporated
  • Address : 8500 Balboa Boulevard, Northridge, CA 91329 USA
  • Website : https://www.harmankardon.com

Product Usage Instructions

Installation
To install the Unbranded Marine Headunit, please follow these steps

  1. Select a suitable location on your boat’s dashboard or console.
  2. Ensure the area is clean and free from any debris
  3. Securely mount the headunit using the provided mounting brackets and screws.
  4. Connect the necessary power and audio cables to the appropriate ports on the headunit.
  5. Verify that all connections are secure. Powering On/Off

To power on the Unbranded Marine Headunit

  1. Ensure that the boat’s battery is connected and providing power.
  2. Locate the power button on the headunit.
  3. Press and hold the power button until the unit powers on.

To power off the Unbranded Marine Headunit

  1. Locate the power button on the headunit.
  2. Press and hold the power button until the unit powers off.

Audio Playback
To play audio through the Unbranded Marine Headunit

  1. Ensure that a compatible audio source (e.g., smartphone, MP3 player) is connected to the headunit.
  2. Use the headunit’s interface or remote control to select the desired audio source.
  3. Adjust the volume level using the volume controls.

Bluetooth Connectivity
To connect your device via Bluetooth

  1. Enable Bluetooth on your device.
  2. Access the Bluetooth settings on the Unbranded Marine Headunit.
  3. Select your device from the available list of devices.
  4. Follow any additional on-screen prompts to complete the pairing process.

Troubleshooting
If you encounter any issues with the Unbranded Marine Headunit, please refer to the following troubleshooting steps

  1. Ensure all cables and connections are secure and properly connected.
  2. Check that the power source is providing sufficient power.
  3. Refer to the user manual for specific troubleshooting steps related to your issue.
  4. Contact customer support if the issue persists.

FAQ

  • Q: How do I update the firmware of the Unbranded Marine Headunit?
    A: To update the firmware, please visit our website at https://www.harmankardon.com and download the latest firmware version. Follow the provided instructions to install the update on your headunit.

  • Q: Can I use the Unbranded Marine Headunit with non-Apple devices?
    A: Yes, the Unbranded Marine Headunit is compatible with both Apple and non-Apple devices. However, certain features may be limited when used with non-Apple devices.

  • Q: Is the Unbranded Marine Headunit waterproof?
    A: The Unbranded Marine Headunit is designed to withstand marine environments and is water-resistant. However, it is not fully waterproof. Avoid direct exposure to water and ensure proper installation to minimize water intrusion.

Owner’s Manual

Unbranded Marine Headunit

This device complies with Part 15 of the FCC Rules [and contains license- exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS standard(s)].
Operation is subject to the following two conditions

  1.  This device may not cause harmful interference, and
  2.  This device must accept any interference received, including interference that may cause undesired operation of the device.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

CAN ICES-003 (B) / NMB-003 (B)

Radiation Exposure Statement

  • This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

  • Use of the Made for Apple and Works with Apple badges means that an accessory has been designed to connect specifically to the Apple product(s) identified in the Made for Apple badge and to work specifically with the technology identified in the Works with Apple badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

  • iPad, iPad Air, iPad Pro and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries.

  • Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

  • This equipment complies with RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

  • HARMAN International Industries, Incorporated 8500 Balboa Boulevard, Northridge, CA 91329 USA
    https://www.harmankardon.com

  • © 2023 HARMAN International Industries, Incorporated. All rights reserved. harman/kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Features, specifications and appearance are subject to change without notice.

  • CA_Unbranded headunit_OM_US_PV_V7

  • CA_Unbranded headunit_OM_US_PV_V7.indd 2

  • 7/5/2023 4:33:31 PM

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals