SONUSCORE HALion SONU Ethnic Flute Phrases Owner’s Manual
- June 16, 2024
- SONUSCORE
Table of Contents
OWNER’S MANUAL
INTRODUCTION
Welcome to SONUSCORE ETHNIC FLUTE PHRASES. This HALion instrument makes it possible for you to integrate expressive ethnic flute phrases into your composition.
DOWNLOAD & INSTALLATION
Please download the „EFP HALion Sonic SE Installation Instructions“.pdf available from the download section at your sonuscore.com account and follow the installation instructions.
ETHNIC FLUTE PHRASES
On the main page you can select a theme and access all the basic functions you
need to get started.
3.1 THEME SELECTION BAR
On the left side of the main page are nineteen themes that you can choose
from. Simply click on the theme title to switch to that theme or select the
theme via the key switches in the upper range of your keyboard (C5 – F#6).
3.2 PHRASE SYSTEM
Each theme consists of five complete phrases. You can play the opening, middle
and endings of each phrase and combine them freely to create new phrases. As
an addition we created short endings that will take you back to the root at
any time.
3.3 KEYSWITCHES
You can use the highlighted keys to play the phrases and combine them freely.
3.4 PHRASE PROGRESS BAR
The Phrase Progress Bar shows the waveform of the current phrase and the
playback position the phrase is in.
You can drag the little sample start icon on the left to a different starting
position within the phrase. That can be very interesting as some of the
phrases are very long.
Use „Alt-Click“ to reset the sample start offset in all phrases of the
selected theme.
„Alt-Shift-Click“ will reset the offset in all phrases of all themes.
3.5 PAGE SELECTION
On the bottom of the GUI you can find the Main and FX page buttons. Use those
to navigate between the two pages.
3.6 PLAYBACK SPEED
The speed knob allows you to change the playback speed of the phrases.
It goes from a minimum of 75% up to 125% of the original speed.
3.7 FX PAGE
On the FX page you can access the advanced functions of the EQ, DELAY and
REVERB settings.
3.7.1 EQ
| EQ ON/OFF: | Toggles the EQ on and off. |
|---|---|
| LOW: | Adjusts the gain of the low frequency band of the equalizer. |
| LOW/MID: | Adjusts the gain of the low-mid frequency band of the equalizer. |
| HIGH/MID: | Adjusts the gain of the high-mid frequency band of the equalizer. |
| HIGH: | Adjusts the gain of the high frequency band of the equalizer. |
3.7.2 DELAY
| DELAY ON/OFF: | Toggles the DELAY on and off. |
|---|---|
| SYNC: | Sync to host tempo on/off. |
| TIME: | If SYNC is turned off you can select the delay time in ms. If SYNC is |
turned on you can select the delay time in note values.
FEEDBACK:| Adjusts the FEEDBACK amount of the DELAY effect. Basically this
parameter controls how many times a note will be audible via the DELAY.
MIX:| Adjusts the MIX level of the DELAY effect.
3.7.3 REVERB
| REVERB ON/OFF: | Toggles the REVERB on and off. |
|---|---|
| IR MENU: | Choose one of seven impulse responses from a variety of spaces. |
| PREDELAY: | Adjusts the PREDELAY of the REVERB effect in ms. This parameter is |
helpful for simulating distance.
MIX:| Adjusts the send level of the REVERB.
LEGATO INSTRUMENTS
When opening one of the three included legato instruments you have all the
controls you need right there in the GUI.
4.1 KEYSWITCHES/ADDITIONAL ARTICULATIONS
In the legato instruments you are able to choose between two additional
articulations. They are triggered by hitting the notes in the higher
velocities (120 and above). C1 will activate the Trill while D1 activates the
Bend Up.
4.2 FX
4.2.1 EQ
| EQ ON/OFF: | Toggles the EQ on and off. |
|---|---|
| LOW: | Adjusts the gain of the low frequency band of the EQ. |
| LOW/MID: | Adjusts the gain of the low-mid frequency band of the EQ. |
| HIGH/MID: | Adjusts the gain of the high-mid frequency band of the EQ. |
| HIGH: | Adjusts the gain of the high frequency band of the EQ. |
4.2.2 DELAY
| DELAY ON/OFF: | Toggles the DELAY on and off. |
|---|---|
| SYNC: | Sync to host tempo on/off. |
| TIME: | If SYNC is turned off you can select the delay time in ms. If SYNC is |
turned on you can select the delay time in note values.
FEEDBACK:| Adjusts the FEEDBACK amount of the DELAY effect. Basically this
parameter controls how many times a note will be audible via the DELAY.
MIX:| Adjusts the send level of the DELAY effect.
4.2.3 REVERB
| REVERB ON/OFF: | Toggles the REVERB on and off. |
|---|---|
| IR MENU: | Choose one of seven impulse responses from a variety of spaces. |
| PREDELAY: | Adjusts the PREDELAY of the REVERB effect in ms. This parameter is |
helpful for simulating distance.
MIX:| Adjusts the send level of the REVERB.
CREDITS
Product Concept and Design: SONUSCORE: Tilman Sillescu, Pierre Langer,
Christian Wirtz, Stefan Kemler, Matthias Wolf
Project Lead: Christian Wirtz
Phrases performed by: Linfeng Fang
Recording: Yuan Zhang
KONTAKT Scripting: Stefan Kemler
Sample Editing & Mix: André Molkenthin, Christian Wirtz
User Interface Design: Jonas Meyer
Artwork: Felix Möbius
Videos: Felix Möbius
Marketing: Benedikt Huster, Andreas Hammann, Tobias Kunz, Felix Möbius,
Additional Content: Matthias Wolf, Tilman Sillescu, Christian Wirtz, Nico
Dilz, Simon Schrenk, Andreas Hammann, Simon Wiebe, André Molkenthin
Recorded at „The Recording Studio of China Record (Shanghai) Co., Ltd.“.
SYSTEM REQUIREMENTS:
• For the latest system requirements, please visit
www.steinberg.net ,
www.sonuscore.com or your trusted dealer’s
website.
Document Version 1.0
Product Version 1.0
© by SONUSCORE
Documents / Resources
|
SONUSCORE HALion SONU Ethnic Flute
Phrases
[pdf] Owner's Manual
HALion SONU Ethnic Flute Phrases, HALion SONU, Ethnic Flute Phrases, Flute
Phrases, Phrases
---|---
References
- • Sonuscore • Inspiring Virtual Sample Instruments
- • Sonuscore • Inspiring Virtual Sample Instruments
- Creativity First — Our Passion for Music Inspires | Steinberg