Telbum PL-31Z Party Light Set User Manual
- June 16, 2024
- Telbum
Table of Contents
Telbum PL-31Z Party Light Set
PRODUCT INFORMATION
The Party Light Set is a versatile lighting system that is perfect for parties, events, or any other occasion where you want to create a fun and vibrant atmosphere. With its various lighting modes and colors, this product will surely enhance the visual experience of your space.
- SPECIFICATIONS:
- Voltage: AC110-240V, 50/60Hz
- Power: 40W
- LED PAR: 7PCS/2W RGB
- LED Ball: 3x3W (RGB) LED
- LED UV STOBE: 3x4W UV+White Leds
- Laser power: 30mW 532nm, 100mW 650nm
- Operation: Auto, Sound, remote control
PRODUCT USAGE INSTRUCTIONS
- Setup
- Before using the Party Light Set, follow these steps to set it up:
- Ensure that the product is unplugged from the power source.
- Choose a suitable location to place or mount the Party Light Set.
- Connect the power cord to an appropriate power outlet.
- Make sure all the lights and lasers are securely attached to the unit.
- Power On/Off
- To turn on the Party Light Set, simply plug it into a power outlet. To turn it off, unplug it from the power outlet.
- Operating Modes
- The Party Light Set offers three operating modes: Auto, Sound, and remote control.
- Auto Mode: In this mode, the lights will automatically cycle through various colours and patterns.
- Sound Mode: In this mode, the lights will sync with the music or sound in the environment, creating a dynamic light show.
- Remote Control: The Party Light Set comes with a remote control that allows you to adjust the lighting modes, colours, and patterns conveniently.
- Adjusting Settings
- Use the remote control to adjust the following settings:
- Change the lighting mode (Auto, Sound, or remote control).
- Select specific colours or colour combinations.
- Adjust the brightness of the lights.
- Modify the speed of colour transitions or patterns.
- Safety Precautions
- When using the Party Light Set, please keep the following safety precautions in mind:
- Do not expose the unit to water or moisture.
- Avoid placing the unit near flammable materials.
- Do not look directly into the laser beam.
- Ensure proper ventilation around the unit to prevent overheating.
- FAQ (Frequently Asked Questions)
- Q: Can I use the Party Light Set outdoors?
- A: The Party Light Set is designed for indoor use only. Using it outdoors may expose it to water or other elements that can damage the product.
- Q: Can I connect multiple Party Light Sets?
- A: It is not recommended to connect multiple Party Light Sets as it may exceed the power capacity and cause electrical issues. Each unit should be used individually.
- Q: Can I use the Party Light Set without the remote control?
- A: Yes, you can still use the Party Light Set without the remote control. It has built-in controls that allow you to switch between different modes and adjust settings manually.
- Q: How do I clean the Party Light Set?
- A: To clean the Party Light Set, disconnect it from the power source and use a soft, dry cloth to wipe away any dust or dirt. Do not use any liquid cleaners or solvents.
Introduction
- Thank you for purchasing this product, we are sure that it will serve you for many years to come.
- Before your initial start-up, please make sure that there is no damage caused during transportation.
- If the box or the contents (the product and included accessories) appear damaged from shipping or show signs of mishandling, notify the carrier immediately and contact Amazon customer support for a replacement. Amazon customer support team will help you with this. You
- may contact the Amazon customer support team at: https://www.amazon.com/gp/help/customer/contact-us.
- For urgent issues, you can call Amazon customer service as well: 1-866-216-1072
- If no response from Amazon, you can get support directly from our customer service at bestshowlight@163.com.
- CAUTION! KEEP THIS EQUIPMENT AWAY FROM RAIN, MOISTURE AND LIQUIDS
- CAUTION! TAKE CARE USING THIS EQUIPMENT! HIGH VOLTAGE RISK OF ELECTRIC SHOCK!!
IMPORTANT
The manufacturer will not accept liability for any resulting damages caused by the non-observance of this manual or any unauthorised modification to the equipment.
- Never let the power cable come into contact with other cables. Handle the power cable and all mains voltage connections with particular caution!
- Never remove warning or informative labels from the unit.
- Do not open the equipment and do not modify the unit.
- Do not connect this equipment to a dimmer pack.
- Do not switch the equipment on and off in short intervals, as this will reduce the system’s life.
- Only use the equipment indoors.
- Do not expose to flammable sources, liquids or gases.
- Always disconnect the power from the mains when equipment is not in use or before cleaning! Only handle the power-cable by the plug. Never pull out the plug by pulling the power cable.
- Make sure that the available mains supply voltage is between 100~240V AC, 50/60Hz.
- Make sure that the power cable is never crimped or damaged. Check the equipment and the power cable periodically.
- If the equipment is dropped or damaged, disconnect the mains power supply immediately and have a qualified engineer inspect the equipment before operating again.
- This unit is not intended for fixed installation.
- If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation), do not connect power or switch it on immediately.
- The arising condensation might damage the equipment. Leave the equipment switched off until it has reached room temperature.
- If your product fails to function correctly, stop use immediately. Pack the unit securely (preferably in the original packing material).
- Only use fuses of the same type and rating.
- Repairs, servicing and power connections must only be carried out by a qualified technician. THIS UNIT CONTAINS NO USER-SERVICEABLE PARTS.
- This lighting fixture is for professional use only – it is not designed for or suitable for household use.
- The product must be installed by a qualified technician per local territory regulations. The safety of the installation is the responsibility of the installer. The fixture presents risks of severe injury or death due to fire hazards, electric shock and falls.
PACKAGE CONTENTS
- 1 x PAR LIGHT
- 1 x Tripod
- 1 x Remote control
- 1 x User manual
SPECIFICATIONS
- Voltage: AC110-240V,50/60Hz
- Power: 40W
- LED PAR: 7PCS/2W RGB
- LED Ball: 3x3W(RGB)LED
- LED UV STOBE: 3x4W UV+White Leds
- Laser power: 30mW 532nm, 100mW 650nm
- Operation: Auto, Sound, remote control
REMOTE CONTROL FUNCTION
INSTRUCTIONS FOR USE
- This product is a lighting equipped with LED lamps. Ideal for powerful, low-power consumption lighting.
- The device is only intended for indoor use. Before installation, maintenance and repair, make sure that the device is switched off, unplugged and cooled down.
UNPACKING AND INSPECTION
- Before installation and use, check your appliance for damage and completeness. If there are any problems, return it to your dealer or technical service.
- To avoid the risk of accidents, keep all packaging out of the reach of children.
IMPORTANT NOTE: Electric products must not be put into household waste. Please bring them to a recycling centre. Ask your local authorities or your dealer about the way to proceed.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>