Sing-E Intl ABS1802 Party Karaoke Speaker User Manual
- June 16, 2024
- Sing-E Intl
Table of Contents
Sing-E Intl ABS1802 Party Karaoke Speaker User Manual
Controls
Description
- Mic In
- AUX In
- USB Slot
- Micro SD (TF) Card Slot
- Power On/Off Switch / Volume Knob
- DC 5V In
- Next Track / Station
- Play/Pause / Scan / TWS
- LED Display
- Previous Track / Station
- Mode/Light Button
- Charging Indicator
- Echo Knob
- Mic Volume Knob
Instruction For Use
LED Information
The LED light will turn red while charging and will turn off when the battery is fully charged
ON/OFF Device
Rotate the Power Switch to turn on/off the device.
Control Functions
Increase Volume
Turn Voulme Knob to adjust the volume to your desired level
Decrease Volume
Turn Voulme Knob to adjust the volume to your desired level
Pause
Short press Play / Pause button once to pause music
Play
Short press Play/Pause button once to resume music
Previous track
Short press the Previous Track/Station button to the previous track
Next track
Short press the Next Track/Station button to the next
Listening to Music using USB / Micro SD (TF) Card Slot
Insert USB flash drive into the USB slot or Micro SD (TF) card into the Micro SD (TF) card slot accordingly. An indication tone would be heard, and music would play automatically.
(Note: USB/Micro SD (TF) Card: Supports up to 16GB; Supports music file format: MP3, WAV. USB Flash Drive or Micro SD (TF) Card not included.)
Listening to Music using AUX-In
Plug the 3.5 mm Aux-in cable (included) into the AUX-In port of the speaker, voice message “Auxiliary mode” would be heard, and LED display will show “LINE”. Plug the other end of the cable to the audio device (such as computer/tablet / MP3 Player etc.).
(Note: While using AUX-In function, except volume function, all functions such as playing next/previous track can be controlled only through your source device).
Listening FM radio
-
Long press the Mode button each time to switch to FM radio mode.
Long press the Scan button for searching and recording all radio stations within frequency range 87.5-108MHz. -
Short press the Next Track / Station button or Previous Track/Station button for listening next or previous already saved radio station.
Using the Wired Microphone
- Insert the plug of the Microphone (Not included) into the MIC INPUT of the speaker.
- Turn on the Microphone, and speak for megaphone operation or sing for Karaoke operation.
- Rotate the Volume knob and Mic volume knob to adjust your favorite volume level, and adjust your desire echo effect with the echo knob.
Using the Wireless Microphone
- Turn counter-clockwise the bottom part of the Wireless Microphones (included) to open the battery compartment, insert 2×1.5V AA batteries (not included) inside the battery compartment, as per the indicated polarity, Put back the bottom part and turn it clockwise to secure.
- Turn on the Wireless Microphones with green LED light, it will automatically connect with the speaker with indication tone. You can speak for megaphone operation or sing for Karaoke operation.
- Rotate the Volume knob and Mic volume knob to adjust your favorite volume level, and adjust your desire echo effect with the echo knob.
TWS pairing use (if you own 2 Bluetooth Speakers)
- Make sure both speakers are “ON” and not paired with any Bluetooth device. An indication tone would be heard from each speaker.
- Choose either one as your master speaker.
- Long press the TWS button on master unit.
- Both units will wirelessly connect with each other, and you would hear an indication tone after they pair together successfully.
- Activate the Bluetooth function on your source device (Mobile Phone, Tablet etc). Please refer to manufacturer’s instructions for instructions on enabling Bluetooth on your device.
- Search for available Bluetooth devices and you would find “SY SPEAKER Pair it with this device.
- Once paired successfully, an indication tone would be heard.
- You can now stream wireless music on your speaker through your source device.
Note: TWS stands for True Wireless. If you want to separate 2 speakers again for individual use, long press the TWS button on any one speaker.
FCC ID:2BA67-ABS1802(For Speaker)
FCC ID:2BA67-ZQSMIC(For Microphone)
Paired for use.
Color Changing light Mode
(Not function in FM mode, and LEDs are not replaceable) Long press the
“LIGHT” button each time to change 6 different color changing light patterns
(including off light mode).
Troubleshooting
| Symptom | Solution |
|---|---|
| Low sound level |
- Adjust source volume.
- Charge Battery.
No sound|
- Turn the VOLUME knob to increase the volume.
- Play the music in the connected device and make sure the volume level is in high level.
- Press the MODE button to set the input source to the desired function.
Sound distortion|
- Turn the VOLUME knob to decrease the volume.
Product Specifications
- Bluetooth version: 5.0
- Speaker output: 10W
- Unit size: 8″ (L) x 6.7″ (D) x 12.2″ (H)
- Unit weight: 2.2 lbs
- Bluetooth range: 33 feet
- FM frequency range: 87.5-108MHz
- Power input: DC 5V
- Charging time: About 5-6 hours
- Play time: Up to 2 hours (max volume) or Up to 2.5 hours (moderate volume)
- Built-In Rechargeable Lithium Battery: 3.7V/2400mAh
- USB/Micro SD (TF) Card: Supports up to 16GB, supports music file format: MP3, WAV
(Note: Battery life & charging time may vary based on usage, types of devices connected & wireless distance.)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>