KCO Lighting Modern Gold Brass LED Sputnik Chandelier Instruction Manual
- June 16, 2024
- KCO Lighting
Table of Contents
KCO Lighting Modern Gold Brass LED Sputnik Chandelier
INSTALLATION DIAGRAM
CAUTION: READ INSTRUCTIONS CAREFULLY AND TURN ELECTRICITY OFF AT THE MAIN CIRCUIT PANEL BEFORE BEGINNING INSTALLATION.
Diagram Description
The diagram provides a visual guide for installing a chandelier. It includes an overhead view of the chandelier’s layout, a side profile, and a close-up of the wiring configuration with labels for the ‘N: Neutral wire’, ‘L: Live wire’, and ‘⏚: Earth wire’. An important note states: “Please white wire to white wire, black wire to black.
Installation Steps
- Install the rod in the chassis.
- Connect the white terminal on the lamp arm with the terminal on the lamp body. Complete all wiring work by analogy.
- Tighten the connected wires of lamp arms in the holes of the lamp body one by one.
- Install a G4 light bulb.
- Install acrylic lampshade.
Specifications
| Step | Action | Detail |
|---|---|---|
| 1 | Install Rod | Rod is secured in the chassis as the foundation. |
| 2 | Wire Connection | White wire connected to white terminal; black to black, |
following the analogy.
3| Tighten Wires| Secure all connected lamp arms sequentially.
4| Bulb Installation| Insert G4 light bulbs into the lamp sockets.
5| Lampshade Installation| Acrylic lampshade is attached to complete the
installation.
FAQ
Q: What type of light bulb is required for this chandelier?
A: The chandelier uses G4 light bulbs.
Q: Is it necessary to turn off the electricity before installation?
A: Yes, it’s crucial to turn off electricity at the main circuit panel for
safety. Q: Can the wires be connected in any order?
A: No, the white wire must be connected to the white terminal, and the
black wire to the black terminal. Q: Do I need to install the lampshade
last?
A: Yes, the acrylic lampshade should be installed after the light bulbs are
in place.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>