RUIMA ELECTRONICS TD-8712A Bluetooth Speaker Instructions
- June 15, 2024
- RUIMA ELECTRONICS
Table of Contents
TD-8712A Bluetooth Speaker
PACKAGE CONTENTS
1 X MPD25XB
1 X Power cord
1 X User Manual
SPECIFICATIONS
Output Power: | 200W |
---|---|
Frequency Response: | 48-20KHz |
SNR: | ≧65dB |
THD: | ≦10% |
Power supplied: | AC Power 110V-240V |
Loudspeaker: | 12 inch x 2+3 inch (External diameter 255mm)magnetic resistant 3 |
ohms.
DEVICE FEATURES
- Product dimensions: 51.38″H x18.03″W x 17.64″D
- BT,wireless stream music from any BT-enabled devices such as mobile phone and notebook.
- Built-in MP3 digital decoder for decoding and playing MP3 files.It brings you perfect sound quality.
- External USB socket to enjoy music.
- With a mini control button for volume adjustment,easy to operate.
- AC 110-240V charging,supply with power cord.
- FM digital radio(87.5MHZ-108MHZ),listen to the latest news and music.
- Able to connect to any audio output equipment,such as mobile phones/MP3/MP4/laptops,etc.
- Line: LINE IN can connect to PC,mp3,Phone,or other aux facilities.
INSTRUCTIONS
- Power switch
- MODE button: Lightly press to enter into selection for Line, FM Radio , BT, USB,and TF card.)
- Shortly pressing to play the previous music under BT,TF Card,and USB modes.Shortly pressing to play previous radio station under FM mode.Long pressing to fast back under TF Card,and USB modes.
- : Short press for play and pause under TF/BT node, Under FM radio mode, Long press to start auto-search and memory stations, Long press again to stop auto-search.
- Shortly pressing to play the next music under BT,TF Card,and USB modes.Shortly pressing to play next radio station under FM mode.Long pressing to fast forward under TF Card,and USB modes.
- EQ sound effect mode button
- LINE: LINE IN can connect to PC,mp3,Phone,or other aux facilities.
- USB Port: Support USB and can play MP3 format music in U disk.
- TF card Port: Support TF CARD and can play MP3 format music in CARD.
- Press XBASS botton on control panel to adjust bass effect
- M IC VOLUME Music volume adjust
- MIC: Microphone input.
- GT: Lnstrument input
- Five-stage equalize
- Reverb adjustment
- Light mode selection
- Mic phone priority
- Foledr button
- TWS pairing(Wireless Bluetooth Connection:Under blue tooth mode, press TWS button to pairing another TWS speaker and playing them with same input signal, repress to quit the function).
- Function switch
- Instrument Volume
- Music master volume knob
FUNCTION:
-
How to connect to BT:
When you turn on the speaker, it should already be on the BT mode.
Please go on your smart device or cell phone and search for the BT connections.
You should seem, MPD25XB. Please select it and you will be connected and ready to enjoy the tunes.
Short pressing the button to play last music.
Short pressing the button to play next music.
Short pressing the button to play/pause music
Twist the knob to control volume up(Turn right) and down (Turn left). -
How to pair two speakers with the TWS function:
Turn on speakers, Press the “ TWS ” button on one of the speakers. And then an indication voice would sound.Speakers would enter TWS mode in 1-3 seconds.Two speakers could be connected with a same BT device and then play music together.When double press the “ TWS ” button again to cancel the TWS function. -
Radio function:
Shortly press the MODE button and switch to Radio mode.
Long pressing the button for station automatic searching.(Automatic searching will be finished minutes.)
Short pressing the button to play last station.
Short pressing the button to play next station.
Twist the knob to control volume up(Turn right) and down (Turn left).
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction