ThorgeOn 63A1 Phase WiFi Energy Meter User Manual
- June 16, 2024
- THORGEon
Table of Contents
WIFI ENERGY
METER INSTRUCTION
WIFI ENERGY METER
Function
- Remote control at anytime from any where
- Schedule/Tinner/loop timer
- Energy monitoring
- Under voltage protection 150V-190N (adjustable)(default 170)
- Over voltage proteaiton 250-300V (adjustable) (default 270
- Over current protection A-63A4 (adjustable) (default. 634)
- Electric leakage protection10-990A8. Preset current/voltage threshold values by app, Once the teat -time/current/voltage reaches the threshold values. The connected electrical appliances will be turned off automatically
Technical Parameters:
Rated Supply Voltage AC 220V
Operation voltage Range; AC8O-40v(single phase)
Rated Frequency 50/60#
Electric Current pAsetting range. 163A4
Oveervoltage pU) setting range: 250-300v (adjustable)
Undervoltage(et) setting range 150-190 [adjustable)
Electric Leak.age Pfolect. [Th,sfe,oturecan be turned off Error 2%
»U and«U trip delay. 0.Ss
Voltage Measurement Accuracy.2% [Not exceeding 2% 0f the overall range)
Reset/Start Delay.Ss.90%
Output Contact NO
Operating Temperature -30CA7OC
Range. 0-99999.9kw/h
Rated insulation Voltage: 400
Altitude 82000m
Power Display 
Parameter Settings:
- Cieke SET to view each data
- Press SET to 45 seconds to enter setup mode, and then press SET to select, press and Key to adjust the set
Network Connection press for 5 seconds until the WF[indicator blinks quickly to enter the network connection
- Scan the Q code underneath with mobile QR-code scanning tool, or search Tuya smart” at mobile application market to download a0d install App.
- Connect hone Wion your mobile phoneandstart
- Tuya smart” ADDS follow the instruction in the ADP to register/login App account and add new device.
- After finishing adding new device, youcaruse App to control your device conveniently.S. App is based 0n actual released version
Network Setting:
Start Tuya smart” App and log in At the first page, select family at the top
left corner and then lice + onthe top right corner to enter the device
addition setting page
Click all device” and find out the Energy item to select. Turn the power on of
the power meter and press key for S seconds till the network indicator flashes
rapidly, click”confirming the indicator is flash rapid” Button.
Input the password of connected wifi only supports 2.4G wireless network, 5G wireless network is not supported.existence of Chinese Characters in WiFi name and passwordin currently not supported it may cause the AP fails to addnew device Clie Confirm and wait for connection When finish connection ad add deice successfully, you can set theinstallation room of the device. Switch button And central power button ca control the power on/off of the device.
WIFI ENERGY METE
01070
www.thorgeon.corn/01010www.thorgeon.com
SA4 ATTA” Daugavgrivas street 77
Riga. Latia, L-1007
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>