CloudyBay HM1215SMXXX 12INCH Semicircle Low Profile Smart Wall Light Instruction Manual
- June 16, 2024
- CloudyBay
Table of Contents
CloudyBay HM1215SMXXX 12INCH Semicircle Low Profile Smart Wall Light
Product Information
Specifications:
- Model: HM1215SMXXX
- Size: 12 inches
- Type: Semicircle Low Profile Smart Wall Light
- Mounting Bracket: Included
Product Usage Instructions
Before proceeding with the installation, please read the user manual and voice control guide provided with the product.
Mounting Bracket Installation:
- Use a Philips screwdriver to fix the mounting bracket (CC) on the junction box (not included) with the screw (AA).
- Pull out the live wire, neutral wire, and ground wire from the junction box.
- Connect the live wire to the LIGHT UNIT’s black wire.
- Connect the neutral wire to the LIGHT UNIT’s white wire.
- Connect the ground wire to the LIGHT UNIT’s bare copper wire using BB, or fix both ground wires on the mounting bracket’s green screw firmly.
- Approach the LIGHT UNIT to the mounting bracket (CC) until the LIGHT UNIT’s center hole aims at the screw of the mounting bracket.
- Fix the LIGHT UNIT with the round screw cap.
Dimmer Usage:
If you only have a dimmer at hand, set it to the highest level only. If the
light performance is not good, we strongly advise you to change to a regular
On/Off switch instead.
Final Installation Steps:
- Tighten the thumb nuts on the metal ring to fix the LIGHT UNIT on the wall firmly.
- Installation is completed. Proceed to the USER MANUAL & VOICE CONTROL GUIDE (EE) to complete the setup.
Product Care and After Sales Service:
- If the product shows any visible defect, please discontinue its use and contact customer service.
- If there is any problem with the lights due to non-human reasons, contact customer service for a brand-new replacement or a full refund without the need to return the goods.
- If you are not completely satisfied with the product after installation but prefer not to disassemble it, contact customer service for comparable compensation.
FAQ (Frequently Asked Questions):
-
Q: How can I contact customer service?
A: You can contact us through smart@cloudybaylighting.com or info@cloudybaylighting.com. We will do our best to assist you. -
Q: What should I do if the light performance is not good?
-
A: If you only have a dimmer at hand, set it to the highest level. However, if the light performance is still not satisfactory, we recommend changing to a regular On/Off switch instead.
-
Q: What should I do if I encounter any issues during installation or setup?
-
A: Please refer to the user manual and voice control guide provided with the product. If you still face difficulties, contact customer service for assistance.
-
Q: How can I request a refund or replacement?
-
A: If there is any problem with the lights due to non-human reasons, contact customer service for a brand-new replacement or a full refund without the need to return the goods.
-
Q: What if I am not completely satisfied with the product after installation?
-
A: If you are not completely satisfied with the product after installation but prefer not to disassemble it, contact customer service for comparable compensation.
PLEASE READ CAREFULLY BEFORE INSTALLING FIXTURE
Save these instructions, as you may need them at a later date.
Component List
Installation Instructions
- TURN OFF THE POWER SUPPLY BEFORE YOU START INSTALLATION!
- Use a Philips screwdriver to fix MOUNTING BRACKET CC on the junction box (junction box excluded) with SCREW AA
- Pull out live wire, neutral wire, and ground wire from the junction box, connect live wire to LIGHT UNIT’s black wire, connect neutral wire to LIGHT UNIT’s white wire, connect ground wire to LIGHT UNIT’s bare cooper wire with BB, or fix both ground wires on mounting bracket’s green screw firmly.
- Approach LIGHT UNIT to the MOUNTING BRACKET CC, till LIGHT UNIT center hole aim on the screw of the mounting bracket, and fix LIGHT UNIT with a round screw cap.
- Tighten the thumb nuts on the metal ring to fix the LIGHT UNIT on the wall firmly.
- Confirm the lighting fixture is fixed securely.
- Installation is completed, please go ahead to the USER MANUAL & VOICE CONTROL GUIDE to complete the setting.
12INCH SEMICIRCLE LOW PROFILE SMART WALL LIGHT
GENERAL : All electrical connections must be by local and National Electrical Code (N.E.C.) standards. If you are unfamiliar with proper electrical wiring connections, contact and obtain the services of a qualified electrician. Use UL or IEC approved wire only for input/output connections.
Remove fixture and mounting components from the box, and make sure that no parts are missing, by referencing the illustration in the illustration instructions.
PRODUCT CARE
After Sales Service
- Please discontinue using the product right away if the product shows any visible defect and contact customer service.
- If there is any problem with our lights for non-human reasons, please contact customer service, and we will send you brand-new replacements without the need to return goods or a full refund.
- If you are not completely satisfied with the product after installation but prefer not to disassemble it, contact us right away, and we will provide comparable compensation.
3-Year Limited Warranty
LIMITED WARRANTY:
This fixture is warranted to be free from defects in workmanship and material
for up to 3 years. Based upon reasonable household usage, when used by package
and included instructions. If this fixture does not last for the period
guaranteed, the manufacturer will send you a replacement fixture upon receipt
of the returned fixture, register receipt, and proof of purchase. To contact
us, please email us at
smart@cloudybaylighting.com to find out
how to return the fixture. We are committed to making high-quality products.
Returning the fixture will help us monitor and further improve product
quality.
This replacement is the sole remedy available, and LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES IS HEREBY EXPRESSLY EXCLUDED.
Note : This product is a smart light, using Direct Digital Controls rather than triac dimming. Here are two dimming ways for your reference:
- Download Cloudy Bay’s APP, go to the product group or single product page, adjust the brightness and CCT of white light or color light on the control panel; you can also go to the home page, click product group or single product’s common function, adjust brightness and color temperature
- Control with a smart voice device such as Google Assistant or Amazon Alexa if you have installed it successfully.
If you only have a dimmer at hand, set it to the highest level only, if light performance is not good, we strongly advise you to change to a regular On/Off switch instead.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, under part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Information
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body. Thank you very
much for choosing our product!
QUESTIONS? COMMENTS?
SUGGESTIONS? COMPLAINTS?
Please contact us through
smart@cloudybaylighting.com or
info@cloudybaylighting.com We will do our
best to make it right for you. Thank you very much.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>