Jabra Evolve 65e UC Headset Instructions
- June 16, 2024
- Jabra
Table of Contents
Jabra Evolve 65e UC Headset
Specifications
- Product Name: Jabra Evolve 65e UC
- Compatibility: Requires Jabra Direct – current version
- Support Page : Jabra Evolve 65e Support
Product Usage Instructions
Step 1: Compatibility Check
Before using the Jabra Evolve 65e UC, ensure that you have the latest
version of Jabra Direct installed on your device. Jabra Direct is required for
proper functionality.
Step 2: Getting Started
To begin using the Jabra Evolve 65e UC, follow these steps:
- Connect the USB dongle to your computer or mobile device.
- Put on the headset and adjust it for a comfortable fit.
- Turn on the headset by pressing the power button located on the control unit.
Step 3: Pairing with Bluetooth Device
If you wish to connect the Jabra Evolve 65e UC to a Bluetooth-enabled
device, follow these steps:
- Ensure that Bluetooth is enabled on your device.
- Press and hold the Bluetooth pairing button on the control unit until the LED indicator starts flashing blue.
- Select “Jabra Evolve 65e UC” from the list of available Bluetooth devices on your device.
- Follow any additional on-screen instructions to complete the pairing process.
Step 4: Adjusting Settings
Customize your Jabra Evolve 65e UC experience by adjusting the settings using
Jabra Direct. You can modify audio preferences, update firmware, and configure
other features according to your preferences.
Step 5: Charging
To charge the Jabra Evolve 65e UC, connect it to a power source using the
included USB cable. The LED indicator will turn solid red during charging and
will turn off once fully charged.
FAQ
Q: How do I update Jabra Direct to the latest version?
A: To update Jabra Direct to the latest version, follow these steps:
- Visit the Jabra Evolve 65e support page: Jabra Evolve 65e Support
- Download the latest version of Jabra Direct.
- Run the installer and follow the on-screen instructions to complete the update process.
Q: How do I reset the Jabra Evolve 65e UC?
A: To reset the Jabra Evolve 65e UC, follow these steps:
- Disconnect the headset from your device.
- Press and hold the volume up and volume down buttons simultaneously for 5 seconds.
- The LED indicator will flash purple, indicating that the headset has been reset.
Jabra Evolve 65e UC
When I speak into the microphone, I hear my voice not or hear it too loudly. How can I change the sidetone level? Setting up Jabra Direct?
requirements Jabra Direct – current version Use the following steps to adjust the sidetone level to suit you to hear your voice or to reduce the volume.
- In Jabra Direct, select your device.
- Click Device.
- Under Device settings, make sure > Headset (Headset) that the Sidetone setting (Sidetone) is switched on.
- In the Sidetone level, choose your preferred one Setting off. The default setting is 0 dB (nominal). Select +3 dB or +6 dB to make your voice louder. With the opposite settings, you will hear your voice less loudly.
- Click Apply.
- With a test call you can check whether the sidetone setting for She is satisfactory. Otherwise, repeat the previous Steps.
Notice
Illustrations and texts are for illustration purposes only. Applicable
Illustrations and texts may vary depending on the connected device and vary
depending on the update status of the software.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>