Jabra 9553-410-111 USB-A UC Mono Headset Instructions

June 16, 2024
Jabra

Jabra-LOGO

Jabra 9553-410-111 USB-A UC Mono Headset

Product Information

  • Specifications
    • Product Name: Jabra Engage 55 – USB-A UC Mono
    • Compatibility: USB-A
    • Headset Type: Mono
  • Best Practices for Storing Rechargeable Batteries
    • The battery in your Jabra Engage 55 headset is rechargeable and not replaceable. To ensure the longevity and proper functioning of the rechargeable battery, please follow these guidelines:
    • Avoid placing the battery in direct sunlight as it can cause overheating.
    • Avoid exposing the battery to extremely cold temperatures as it may affect its performance.
    • Do not store the battery for extended periods without recharging it. It is recommended to recharge the battery at least once a month for most products to maintain its health.
    • Improper handling or storage of rechargeable batteries can reduce their overall lifetime.

Product Usage Instructions

  • Charging the Battery
    • To charge the battery of your Jabra Engage 55 headset, follow these steps:
    • Connect the USB-A cable to the charging port on the headset.
    • Connect the other end of the USB-A cable to a power source, such as a computer or a wall adapter.
    • The LED indicator on the headset will start blinking to indicate that the battery is being charged.
    • Once fully charged, the LED indicator will remain solid.
  • Pairing the Headset
    • To pair your Jabra Engage 55 headset with a compatible device, please follow these steps:
    • Ensure that the headset is charged and powered on.
    • Put the headset in pairing mode by pressing and holding the pairing button until the LED indicator starts flashing.
    • On your device, enable Bluetooth and search for available devices.
    • Select “Jabra Engage 55” from the list of available devices.
    • Follow any additional on-screen prompts to complete the pairing process.
  • Frequently Asked Questions (FAQ)
    • Q: Can I replace the rechargeable battery in my Jabra Engage 55 headset?
    • A: No, the battery in the Jabra Engage 55 headset is not replaceable. It is a rechargeable battery.
    • Q: How often should I recharge the battery?
    • A: It is recommended to recharge the battery at least once a month for most products to maintain their health.
    • Q: What should I do if my headset is not pairing with my device?
    • A: If you are experiencing difficulties in pairing your Jabra Engage 55 headset with your device, try the following steps:
    • Ensure that Bluetooth is enabled on your device.
    • Make sure the headset is charged and powered on.
    • Reset the headset by turning it off and on again.
    • Put the headset in pairing mode and try pairing again.
    • If the issue persists, refer to the troubleshooting section in the user manual or contact Jabra support for further assistance.

PRODUCT INTRODUCTION

abra Engage 55 – USB-A UC Mono

  • Best practices for storing rechargeable batteries
    • The battery in your Jabra device is rechargeable, not replaceable.
    • To preserve and store rechargeable batteries, use the following guidelines.
    • These guidelines apply to the use of batteries in general, and not specifically to Jabra devices.
    • Avoid placing batteries in direct sunlight.
    • Avoid placing batteries in extreme cold.
    • Do not store batteries for extended periods without recharging them, at least once a month for most products.
    • If you handle or store rechargeable batteries incorrectly, their lifetime may be reduced.

https://www.jabra.com.au/supportpages/jabra-engage-55/9553-410-111/faq /5c8a164c-08b6-418b-bbfe-31f3192f0821.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals