Jabra Evolve2 Buds USB-C MS Wireless Charging Pad User Manual
- June 16, 2024
- Jabra
Table of Contents
Jabra Evolve2 Buds USB-C MS Wireless Charging Pad
Specifications
- Product Name : Jabra Evolve2 Buds
- Connector Type : USB-C
- Compatibility : Microsoft Teams
- Charging Type : Wireless Charging Pad
Product Usage Instructions
Pairing the Jabra Evolve2 Buds
- Make sure the earbuds are charged and turned on.
- Activate Bluetooth on your device.
- Open the Bluetooth settings on your device and search for available devices.
- Select “Jabra Evolve2 Buds” from the list of available devices.
- Follow any additional on-screen prompts to complete the pairing process.
Using the Jabra Evolve2 Buds
To use the Jabra Evolve2 Buds:
- Make sure the earbuds are charged and turned on.
- Insert the earbuds into your ears.
- You can control various functions using the touch controls on the earbuds. Refer to the product manual for specific touch control instructions.
- To adjust the volume, use the volume controls on your connected device or adjust it through the software/application you are using.
Charging the Jabra Evolve2 Buds
To charge the Jabra Evolve2 Buds using the wireless charging pad:
- Place the wireless charging pad on a flat and stable surface.
- Connect the wireless charging pad to a power source using the provided USB-C cable.
- Make sure the charging pad is turned on.
- Place the Jabra Evolve2 Buds on the charging pad, aligning the charging contacts on the earbuds with the corresponding contacts on the pad.
- The earbuds will start charging automatically. The LED indicators on the charging pad will show the charging status.
- Leave the earbuds on the charging pad until they are fully charged.
FAQ
What can I do if the pairing steps are not successful?
If the pairing steps are not successful, try the following troubleshooting steps:
- Make sure the earbuds are charged and turned on.
- Restart your device and try pairing again.
- Reset the earbuds by placing them in the charging case and holding down the button on the case for 10 seconds. Then, take them out of the case and try pairing again.
- If possible, try pairing with a different device to check if the issue is with your original device.
- Contact Jabra support for further assistance if the issue persists.
USING INSTRUCTIONS
Jabra Evolve2 Buds – USB-C MS – Wireless Charging Pad
What can I do if the pairing steps are not successful?
If the pairing steps are not successful, try the following troubleshooting
steps. Try re-pairing after you complete each troubleshooting step.
- Restart your mobile device by turning it off and on.
- Restart your Jabra device by turning it off and on.
- Ensure your Jabra device is in pairing mode. See the following section, Related Frequently Asked Questions, for guidance on how to pair your Jabra device.
- On your mobile device, turn Bluetooth off and on.
- Try to pair your Jabra device using a different mobile device. This is to confirm that a different mobile device will find and pair with your Jabra device.
- Ensure your Jabra device is updated with the latest firmware version.
- Reset your Jabra device. See the following section, Related Frequently Asked Questions, for guidance on how to reset your Jabra device.
- If you still cannot pair your Jabra device with your mobile device, contact support.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>