FAGERHULT Pleiad G4 Wallwasher Ceiling Light Owner’s Manual

: June 16, 2024
: FAGERHULT

Table of Contents

DESIGN
TECHNICAL DATA
ELECTRICAL DATA
LIGHTING DATA
Installation
Connection
Design
Reflector
Miscellaneous
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

FAGERHULT Pleiad G4 Wallwasher Ceiling Light Owner’s Manual

DESIGN

Reflector: Specular
Weight, kg: 0.6
Height, mm: 138
Diameter, mm: 183

TECHNICAL DATA

Connection: Wagon WinSAT 5-w ay male
Protective class: 1
IP rating: 20
Min. ambient temperature, °C: -25
Max. ambient temperature, °C: 25
Light control: DALI/Ph as pulse
Brand of driver: Triton ic

ELECTRICAL DATA

MCB B10A: 22
MCB C10A: 36
Switch control, max no.: 25
Power on last level: Yes
Stand by W: 0.2
Mains frequency, Hz: 0, 50, 60
Average W: 14.5
Power factor, 100 %: 0.96
Surge protection DM, kV/kA: 1
MCB B16A: 36
MCB C16A: 60
AM: Yes
Corridor function : Yes
Rated supply voltage, V : 220-240
Start W: 14
End W: 15
Surge protection CM, kV/kA: 2
THD, %: 14

LIGHTING DATA

Energy class, LED module: E
Im/W: 97
Lumen maintenance 100 000 h: L100
LED driver, h/max failure % :100000/10
CLO time, h: 100 000
CRI: 80
Lumen output: 1335
Lumen maintenance L100 B50, h: 100 000
Lumen maintenance at 50 000 h: 1
CLO function on: Yes
SDCM: 3
CCT, K: 3000

An efficient, asymmetrical downlight for illuminating walls with a light that reaches all the way up to the corner of the ceiling. With several luminous fluxes and reflector options, G4 Wall washer is also available with Tunable White and RGB/W.

Installation

Recessed mounting in unventilated or ventilated suspended ceilings. Separate driver and installation clip for easy and tool-free installation supplied as standard. An assembly plate must be used when mounting on soft tile ceilings,, see accessories. For detailed information, see the installation instructions.

Connection

Connection in separate driver box. Snap-in terminal block 3×1.5 mmm² (x2), onward connection possible. 5×1.5 mm² (x2) when dimming. Can also be supplied with chassis mounted snap-in connector in the ballast where a T-splitter or mains cable and plug are possible. The luminaire body and driver are interconnected with a snap-in connector.

Design

Luminaire body in cast aluminum and white PBT-plastic. Visible reflector ring in white PBT plastic (RAL 9003).

Reflector

Metallized PBT in bright and matt aluminum. The reflector has a protective coat of scratch-resistant clear lacquer.

Miscellaneous

The luminaire is supplied with dust protection over the light opening.
IP 20. Luminaire body Class III. The supplied driver must be connected to the protective earth. Luminaires with Tunable White (2700-6500 K) are equipped with driver DALI Device type 8. Luminaires with RGB/W are equipped with driver DALI Device type 6 (4 addresses/luminaire). Also available for DMX on request. For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation. CLO (Constant Light Output) maintains the correct light from the luminaire for the duration of its rated life.”

The articles listed below are examples.
Use Fingerhut Configure to adapt and optimize your own version of Pleiad G4 Wall washer by selecting CRI, color temperatures, optics, luminous flux, accessories, etc.