Jabra Evolve2 55Evolve2 55 Link380a MS Stereo Headsets Instructions

: June 16, 2024
: Jabra

Table of Contents

Jabra Evolve2 55Evolve2 55 Link380a MS Stereo Headsets
Specifications
Product Usage Instructions
FAQ
What do the LEDs on my Jabra Evolve2 55 mean
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Jabra Evolve2 55Evolve2 55 Link380a MS Stereo Headsets

Specifications

Headset Type: Over-the-ear
Connectivity: Bluetooth 5.0, USB-A, USB-C
Bluetooth Range: Up to 30 meters (98 feet)
Battery Life: Up to 37 hours
Charging Time: Approximately 2.5 hours
Microphone Type: Uni-directional
Active Noise Cancellation: Yes

LED Indicators:

The Jabra Evolve2 55 features LED indicators to provide you with important information about the headset’s status. Here is an explanation of the different LED indicators:

Solid Blue LED

A solid blue LED indicates that the headset is connected to a device and is ready to use.

Blinking Blue LED

A blinking blue LED indicates that the headset is in pairing mode and ready to connect to a new device.

Solid Red LED

A solid red LED indicates that the headset is charging.

Blinking Red LED

A blinking red LED indicates that the battery level is critically low and the headset needs to be charged immediately.

No LED

If there are no LEDs lit on the headset, it means that the headset is turned off or not connected to any device.

Product Usage Instructions

1. Charging the Headset:

To charge the Jabra Evolve2 55 headset, follow these steps:

Connect the USB-A or USB-C end of the charging cable to the corresponding port on the headset.
Connect the other end of the charging cable to a power source, such as a computer or a wall adapter.
The LED indicator on the headset will turn solid red to indicate that it is charging.
Once fully charged, the LED indicator will turn off.

2. Pairing the Headset:

To pair the Jabra Evolve2 55 headset with a device, follow these steps:

Ensure that the headset is turned off.
Press and hold the Multi-function button on the headset until the LED indicator starts blinking blue.
Enable Bluetooth on your device and search for available devices.
Select “Jabra Evolve2 55” from the list of available devices.
Follow the on-screen instructions to complete the pairing process.
Once paired, the LED indicator will turn solid blue to indicate a successful connection.

3. Using the Headset:

To use the Jabra Evolve2 55 headset, follow these steps:

Ensure that the headset is charged and paired with your device.
Put on the headset and adjust it for a comfortable fit.
To answer or end a call, press the Multi-function button once.
To reject an incoming call, press and hold the Multi-function button for two seconds.
To adjust the volume, use the volume up and volume down buttons located on the headset. To play or pause music, press the Multi-function button once.

FAQ

Q: Where can I find translated versions of the user manual?

A: Translated versions of the user manual can be found in the Product documents section on the support page.

Jabra Evolve2 55 – Link380a MS Stereo

What do the LEDs on my Jabra Evolve2 55 mean

The following is an explanation of the LED indicators. Jabra-
Evolve2-55Evolve2-55-Link380a-MS-Stereo-Headsets-fig-1

Note
This explanation is in English. For translated versions check the available languages of the user manual in the Product documents section on the support page.