ANGUSTOS HDV-B18IH 1×2 HDMI Over CAT Extender User Manual
- June 16, 2024
- ANGUSTOS
Table of Contents
HDV-B18IH 1×2 HDMI Over CAT Extender
User Manual
HDV-B18IH 1×2 HDMI Over CAT Extender
HDMI 1×2 Splitter
over CAT6 (70m)
VER 1.0
Thank you for purchasing this product
For optimum performance and safety, please read these instructions carefully
before connecting, operating or adjusting this product. Please keep this
manual for future reference.
Surge protection device recommended
This product contains sensitive electrical components that may be damaged by
electrical spikes, surges, electric shock, lighting strikes, etc. Use of surge
protection systems is highly recommended in order to protect and extend the
life of your equipment.
Introduction
This HDMI 1×2 Splitter can distribute 1 HDMI source signal to any 2 display devices. Support video resolution up to 4K2K@30Hz 4:4:4. It is designed with 1 HDMI input, 1 HDMI loop output and 2 CAT outputs. The HDMI signal transmission distance can be extended up to 131ft / 40 meters at the resolution of 4K30Hz, or 230ft / 70 meters at 1080P@60Hz via a single CAT6 cable. The product supports one-way IR control signal pass-through and advanced EDID management.
Features
☆ HDMI 1.4 and HDCP 1.4 compliant
☆ Video resolution up to 4K2K@30Hz (4:4:4) 8-bit
☆ Support audio formats: LPCM 7.1CH, Dolby True HD, and DTS-HD Master Audio
☆ Extend the signal transmission distance up to 40m/131ft at the resolution of
4K30 or 70m/230ft at 1080P@60Hz via a single CAT6 cable
☆ Support 1 HDMI input, 1 HDMI loop output and 2 CAT outputs
☆ Advanced EDID management
☆ Support 12V one-way POC function (only from transmitter to receiver)
☆ Compact design for easy and flexible installation
Package Contents
- 1 × HDMI 1×2 Splitter
- 2 × CAT Receiver
- 1 × IR Blaster Cable (1.5 meters)
- 2 × IR Receiver Cable (1.5 meters)
- 2 × Mounting Ear
- 1 × 12V/1A DC Locking Power Adapter
- 4 × Machine Screw (KM3*4)
- 1 × User Manual
Specifications
Technical
HDMI Compliance| HDMI 1.4
HDCP Compliance| HDCP 1.4
Video Bandwidth| 297MHz/10.2Gbps
Video Resolution| 480i ~1080p50/60Hz, 4Kx2K@30Hz (4:4:4)
Color Depth| 8-bit, 10-bit, 12-bit (1080p@60Hz); 8-bit (4K30Hz)
Color Space| RGB, YCbCr_4:4:4/4:2:2. YUV_4:2:0
Audio Formats| LPCM 7.1CH, Dolby True HD and DTS-HD Master Audio
ESD Protection| Human body model—±8kV (Air-gap discharge) & ±4kV (Contact
discharge)
Connection
Transmitter| Input: 1 × HDMI IN [Type A, 19-pin female] Outputs: 1 × HDMI OUT
[Type A, 19-pin female] 2 x CAT OUT [RJ45] Controls: 1 × IR OUT [3.5mm Stereo
Mini-jack] 1 x EDID DIP switch [4-pin] 1 x UPDATE [Micro USB]
** Receiver| Inputs: 1 x IR IN [3.5mm Stereo Mini-jack] 1 x CAT IN [RJ45,
8-pin female] Output: 1 x HDMI OUT [Type A, 19-pin female]
Mechanical**
Housing| Metal Enclosure
Color| Black
Dimensions| Transmitter: 175mm (W) × 82mm (D) × 18mm (H) Receiver: 79.5mm (W)
× 69mm (D) × 16.5mm (H)
Weight| Transmitter: 366g; Receiver: 130g
Power Supply| 12V/1A DC Locking Power (US/EU standards, CE/FCC/Rohus
certificated)
Power Consumption| 5.4W
Operation Temp.| 0°C ~ 40°C / 32°F ~ 104°F
Storage Temperature| -20°C ~ 60°C / -4°F ~ 140°F
Relative Humidity| 20~90% RH (non-condensing)
Operation Controls and Functions
5.1 Transmitter Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | POWER LED | When the Transmitter is powered on, the red power LED will be |
on.
2| CAT OUT (1~2)| Connect to the CAT port of the Receiver with a CAT6 cable.
3| Power LED (Green)| Transmitter supports one-way POC function. When it
supplies power to the Receiver through a CAT cable, the Power LED will be on.
4| Data Signal Indicator (Yellow)| ▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
5| HDMI OUT| HDMI signal loop output port, connect to the HDMI display device
such as TV or Monitor with an HDMI cable.
6| HDMI IN| HDMI signal input port, connect to HDMI source device such as DVD
or set-top box with an HDMI cable.
7| IR OUT| IR signal output port. Connect to IR blaster cable, the IR signal
is from “IR IN” port of the Receiver.
8| EDID DIP Switch| Used to set EDID mode. Please refer to Section “6. EDID
Mode” for details.
9| UPDATE| Mini USB update port. Connect to PC for firmware updating.
10| DC 12V| DC 12V Power input port.
11| POWER Switch| Press the switch to power on/off the device (“-” for on, “o”
for off).
5.2 Receiver Panel
| No. | Name | Function Description |
|---|---|---|
| 1 | HDMI OUT | HDMI signal output port. Connect to HDMI display device such as |
HDTV.
2| IR IN| Connect to IR receiver cable, the IR signal will emit to the IR OUT
port of the transmitter.
3| CAT| CAT input port. Connect to the CAT output port of the transmitter with
a CAT6 cable.
4| Power LED (Green)| When the Receiver is powered on, the LED will be on. The
device supports POC function, so the Receiver is powered by the Transmitter
through a CAT cable.
5| Data Signal Indicator (Yellow)| ▪ Illuminating: HDMI signal with HDCP.
▪ Flashing: HDMI signal without HDCP.
▪ Dark: No HDMI signal.
5.3 IR Pin Definition
Note:
When the angle between the IR receiver and the remote control is ± 45 °, the
transmission distance is 0-5 meters;
When the angle between the IR receiver and the remote control is ± 90 °, the
transmission distance is 0-8 meters.
EDID Mode
The defined EDID setting list of the product is shown as below:
| EDID Mode | EDID Description |
|---|---|
| 0000 | 1080P, 2CH AUDIO |
| 0001 | 1080P, DOLBY/DTS5.1 |
| 0010 | 1080P, HD AUDIO |
| 0011 | 1080i, 2CH AUDIO |
| 0100 | 1080i, DOLBY/DTS5.1 |
| 0101 | 1080i, HD AUDIO |
| 0110 | 3D,1080P, 2CH AUDIO |
| 0111 | 3D,1080P, DOLBY/DTS5.1 |
| 1000 | 3D,1080P, HD AUDIO |
| 1001 | 4K30, 2CH AUDIO |
| 1010 | 4K30, DOLBY/DTS5.1 |
| 1011 | 4K30, HD AUDIO |
| 1100 | Copy Loop Out |
| 1101 | 720p, 2CH AUDIO |
| 1110 | 720p, DOLBY/DTS5.1 |
| 1111 | 720p, HD AUDIO |
Application Example
The terms HDMI and HDMI High-Definition Multimedia interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.