java L401 Portable Vacuum Callus Remover Instruction Manual
- June 16, 2024
- java
Table of Contents
java L401 Portable Vacuum Callus Remover
Specifications:
- Model: L401
- Version: v01
- Date: 24/10/22
Please read and retain these instructions for future reference.
Assembly Instructions:
Unpack the components carefully. Please check all parts have been removed from the packaging
Parts:
- A. Portable Vacuum Callus Remover
- B. Emery Pad Cover
- C. Emery Pad
- D. Charging Port
- E. Power Button & Low/High Selection
- F. Battery Indicator & Speed Light
- G. Circular Sponge Filter
- H. Buffing Pad
- I. Emery Pad Cleaning Brush
- J. USB Charging Cable
Power Connection:
Insert the USB receiver into the energizing port and plug the other end into the power port. This product is suitable for general USB interface line, which can be connected to mobile power supply, computer, ordinary and vehicle- mounted power supply, etc.
The Enterprise Department
UK Head Office, 11 Bridge Street, Bishop’s Stortford, CM23 2JU
Tel: 0844 4824400*, Fax: 01279 756595
EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France
Tel: (+44) 1279 701269
*UK Calls cost around 7 pence per minute plus your telephone company’s network access. Please check with your telephone supplier.
Instructions for Use:
v001: 24/10/22
How to Use:
- Start by removing the Emery pad cover by lifting it up on one side (Fig. E).
- Plug the micro-USB connector end of the supplied USB cable into the charging port of the Callus Remover (Fig. A).
- Plug the other end of the USB cable into a USB wall adapter, then plug the adapter into a wall socket.
- Turn on the Vacuum Callus Remover by holding down the power button for 2 seconds (Fig. B).
- After turning on, the unit is in low speed. To increase the speed to high, click the power button once more.
- To turn off the Vacuum Callus Remover, hold down the power button until the light turns off.
Warning:
Do not immerse the unit in water or allow water anywhere near the unit. The Portable Vacuum Callus Remover is not waterproof. Store in a dry place.
Holding the Callus Remover securely, gently press the emery pad to the thickest area of dead skin you want to remove and slowly move outwards towards healthy skin (Fig. G). Check intermittently for desired results. Once new, healthy skin is revealed or callus is removed, stop use and switch the unit off.
How to Clean:
- Remove the emery pad and clean it by running it under warm water (Fig. H). Allow the emery pad to air dry. Do not attempt to clean the main unit by running it under water. To clean the main unit, wipe it down with a soft damp cloth.
- Once the emery pad is removed, turn the Callus Remover cover anticlockwise to open the shavings chamber (Fig. I).
FAQ
Q: Can I use the Portable Vacuum Callus Remover in water?
A: No, the Callus Remover is not waterproof. Do not immerse it in water or allow water near the unit.
Q: How do I increase the speed of the Vacuum Callus Remover?
A: After turning on the unit, click the power button once more to increase the speed to high.
Q: How do I turn off the Vacuum Callus Remover?
A: Hold down the power button until the light turns off to turn off the unit.
Portable Vacuum Callus Remover
L401 v01: 24/10/22
Please read and retain these instructions for future reference
Dimensions
9.5 x 6.5cm
- RECHARGEABLE CALLUS REMOVER
- BUILT IN VACUUM
- USB RECHARGEABLE
- 2 SPEEDS.
- INCLUDES EMERY PAD AND BUFFING PAD
- INCLUDES USB CHARGING CABLE
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE
Unpack the components carefully. Please check all parts have been removed from the packaging.
Parts
- A. Portable Vacuum Callus Remover
- B. Emery Pad Cover
- C. Emery Pad
- D. Charging Port
- E. Power Button & Low/High Selection
- F. Battery Indicator & Speed Light
- G. Circular Sponge Filter
- H. Buffing Pad
- I. Emery Pad Cleaning Brush
- J. USB Charging Cable
Power connection:
Insert the USB receiver into the energizing port and plug the other end into
the power port.
This product is suitable for general USB interface line, which can be
connected to mobile power supply, computer, ordinary and vehicle-mounted power
supply, etc.
Instructions for Use
How to Use
-
Start by removing the Emery pad cover by lifting it up on one side (Fig. E).
-
Plug into the micro-USB connector end of the supplied USB cable into the charging port of the Callus Remover (Fig. A). Plug the other end of the USB cable into a USB wall adapter, then plug the adapter into a wall socket.
-
Turn on the Vacuum Callus Remover by holding down the power button for 2 seconds (Fig. B).
-
After turning on the unit is in low speed. To increase the speed to high, click the power button once more.
-
To turn off the Vacuum Callus Remover hold down the power button until the light turns off.
-
Warning Do not immerse the unit in water or allow water anywhere near the unit. The Portable Vacuum Callus Remover is not waterproof. Store in a dry place.
Holding the Callus Remover securely, gently press the emery pad to the thickest area of dead skin you want to remove and slowly move outwards towards healthy skin (Fig. G).
Check intermittently for desired results. Once new, healthy skin is revealed or callus is removed, stop use and switch the unit off.
How to clean
-
Remove the emery pad and clean it by running under warm water (Fig. H).
Allow the emery pad to air dry. Do not attempt to clean the main unit by running it under water. To clean the main unit wipe it down with a soft damp cloth. -
Once emery pad is removed turn the Callus Remover cover anti-clockwise to open the shavings chamber (Fig. I).
-
Slowly remove the circular sponge filter from the chamber. Rinse the filter with warm water and allow to air dry.
-
Clean the remaining skin shavings out of the chamber with the shavings remover brush provided (Fig. J).
-
Once the chamber is fully cleaned, replace the circular filter, shavings chamber cover and emery pad securely.
For best performance, clean the Portable Vacuum Callus Remover after each use.
DISPOSAL
- Coopers of Stortford use recyclable or recycled packaging where possible.
- Please dispose of all packaging, paper, cartons, packaging in accordance with your local recycling regulations.
- At the end of the product’s lifespan please check with your local council authorised household waste recycling centre for disposal.
- Plastics, polybags – this is made from the following recyclable plastic.(ABS)
The Enterprise Department
UK Head Office, 11 Bridge Street, Bishop’s Stortford, CM23 2JU Tel: 0844
4824400, Fax: 01279 756595
www.coopersofstortford.co.uk
EU address: D.S.B. LD, 160 Bd. de Fourmies, 59100 Roubaix, France Tel: (+44)
1279 701269
UK Calls cost around 7 pence per minute plus your telephone company’s network access.
Please check with your telephone supplier.
References
- Coopers of Stortford | Home, Garden and Lifestyle | UK Delivery
- Coopers of Stortford | Home, Garden and Lifestyle | UK Delivery
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>