Eveedo ABS-681 Kids Camera for Boys User Manual
- June 16, 2024
- Eveedo
Table of Contents
User Manual
Caution before use!
- Voltage requirements, please charge camera with no more than 5V 1A/2A adapter.
- Storage the camera in dry and clean environment, packaged well when idle.Wipe printer head dirty, press printer head and push back cover tightly if have lines on paper.
- Avoid moisture, direct sunlight, high temperatures environment for pictures’ storage.
- This camera adopts thermal tech, so overexposed images is blurry after printing.
- Wrong feeding of paper will print blankly, make sure you have paper the right way.
- Free of waste, press OK to enable print mode, a printer icon will show up on upper right.
- Transfer data or clean up the memory card timely to avoid camera stuck.
- Reset slot is near by the SD Card slot. Reset after take SD Card out if necessary.
- Pull the paper out of slot a bit before printing.
- For paper refills, Please search YORKOO kids camera paper.
- Delete Picture: Enter Play Back. Hold the OK button for a few seconds. Click OK.
- Flash on/off: Hold on UP button a few seconds on Photo/Video mode.
Ask a question for seller YORKOO whenever you need.
Q: Feed the paper, video tutorial available on product page.
Q: Doesn't print the photos?
A: 1.Enable printing mode when a printer icon display on the upper right comer, Otherwise the printing mode disabled. 2. Install the paper in correct direction, Otherwise print blankly 3. Warm Tips: Sticking out a bit the paper for printing.
Q: Photo quality is not clear?
A: This camera prints black and white images with safe thermal tech, so color contrast prints best. please do not print overexposed or blurry image, such as full darkness or light-colored images. For natural lighting photo, please Enter Setting, Change Print Mode and Print Density.
Q: Steps to set the printing density to create different styles?
A: Enter the Setting by clicking ‘OK’ button; Click the Next/Previous Button to select Print Mode or Density; Click the Next/Previous button to select a particular Print Density(from 0-4), clicking the 'OK' button.
Q: Camera frozen when extreme cold temperature?
A: Use a needle to press the RESET slot, Turn it on. Note: use the camera between 0-40°C.. Or the battery will be affected.
Q: Can not see photos on Camera Album?
A: It doesn’t read SD card. Make sure insert SD card in slot firstly, Enter the Setting and Click Format, Reset and Turn on after Format. (Back up data in card before format if necessary.)