Aida FE2-(2)-809P-US Wireless Doorbell Instruction Manual

INSTALLATION INSTRUCTIONS
Wireless Doorbell

Features:

1. No battery required for bell push, with LED NightLight.
2.  32 high quality sounds.
3. Self-learning function avoid interference.
4. 150m operating range in the open air.
5.  5 level volume control , 0-85dB Volume range.
6.  Bell push waterproof IP44.
7.  Receiver with US plug in 110V/60Hz.

Transmitter unit

Method 1： Adhesive patch mounting

Method 2： Screw Mounting

Receiver unit

Volume selection:
Press “volume control” button on receiver directly to set volume (There are 5 levels volume, from mute to highest level, volume changes by each pressing), choose volume you need.
Melody selection:
Press “melody selection/pairing button” on receiver directly to set melody(There are 32 melodies optional, melody changes by each pressing), choose melody you need.

Clear setting:

A. Power off receiver, keep holding “melody selection /pairing button” and plug into socket to power on.

B. Wait for around 5 seconds, you will hear 2 “Ding Dong” sounds, which means receiver disconnect with all push buttons.

Pairing Step:

This push button and receiver have been paired in factory.
If you need to add an extra push button or receiver, please follow the steps below.

A. Keep holding “melody selection /pairing button” of receiver for around 5 seconds, receiver will make “Ding Ding” indicate sound: it entered pairing mode (release “ melody selection/pairing button”) Fig .5.

B. (Please finish this step within 30 seconds) Press push button needed one time, receiver will make a “Ding” indicate sound (Fig.6) .
If there are 2 push buttons needed, please press the second push button successively(Fig.7).

C. Press “melody selection / pairing button” of receiver to confirm action at last, push button and receiver finished pairing(Fig.8).

Trouble shooting

1. Check doorbell receiver volume, make sure it is not in mute mode.
2.  Ensure push button is not mounted on metal, near metal studs or near the floor.
3. Try a new location for the Doorbell. Functional range may be adversely affected by one or more of the following factors: weather, radio frequency interference, low transmitter battery or obstructions between the transmitter and receiver.
4.  If the Doorbell and push button(s) do not operate, please clear doorbell setting, then pair push button and receiver again. Clear setting and pairing steps as above (Fig4 to Fig 7).

Wireless Doorbell

RECOMMENDATIONS

1. This product is not suitable for people with heart pacemakers, and does not adapt to the usenear hospitals and medical facilities.

2. Use this product in the following places may shorten remote control distance, even function failure:
   – bell push and receiver have metal doors and windows and reinforced concrete building structure block.
   – wall has a metal film insulation material.
   – around have more metal furniture or cabinets.
   – install the bell push with stainless steel strips shade.
   – bell push equipped with hidden inside a wall.

3. As one of the following appliances in use around may also affect the product performance.
   – computers, microwave ovens, wireless intercom, wireless composite aircraft, the RF wireless remote control, low frequency, high frequency, or microwave therapy apparatus, near the TV broadcasting, a variety of wireless radio, cell phone towers, high voltage transmission line.

Warning

1. Keep minimum distance (10cm, we suggest, could change) around the apparatus for sufficient ventilation.
2. The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc.
3. No naked fire sources, such as lighted candles, should be placed on the apparatus.
4. This doorchime receiver is intended for indoor use only. Do not expose to continuous direct sunlight or humid environment -this will adversely affect the unit. Maximum operating temperature 50 C
5. This appliance is not intended for use by persons (including children) with disabilities or intellectual disabilities, or lack of experience and knowledge.

| Doorbell| Push Button
---|---|---
Operating temperature| From -20°C to 50°C| From -20°C to 50°C
Operating distance(max)| 150m| 150m
Radio Frequency| 433.050MHz
– 434.790MHz| 433.050MHz
– 434.790MHz
Radio Transmitter /receiver| Receiver| Transmitter
Sound level(max)| 85dB| N.A.
Radio Transmission Power(max)| N.A.| 10mW
Voltage| 90-110V-60Hz| 3V
Max Power| 0.5W| 0.5W
Rain proof| No| Yes, IP44
| Indoor use only
---|---
| Equipment with level class II
| Alternative Current (AC)
| Direct Current (DC)

Electrical products must not disposed of out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local regulations. Contact your local authorities or stockist for advice on recycling. The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection-service.
Don’t throw batteries or out of order products with the household waste (garbage) The danaerous substances that they are likely to include may harm health or the environment. Make your retailer take back these products or use the selective collect of garbage proposed by your city.

V2

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>