Vixic P3200 Label Maker Instruction Manual

Vixic P3200 Label Maker

Item Checklist

NOTE The number of label tapes in the package is subject to actual shipment.

Specifications

• Name Portable Label Maker
• Model P3200
• Technology Thermal Transfer Printing
• Label Width (Max) 12mm
• Resolution 203dpi
• Print Head Lifespan SOKM
• Communication Port Bluetooth
• Product Dimensions 116′ 14055mm (4.565.Sl ‘2.16inch)
• Power Input 5V-2A
• Power Supply
  • Lithium Battery
  • Type-C
• Supported Operating System
  • Android
  • iOS

Product introduction

Parts Introduction
Label maker display:

Power Button and Indicator Light
Power button description:

Indicator Light:

How to Install the Label Tape

1. Long press the power button for 3 seconds to turn on the label maker
2. Open the label tape compartment cover at the tape edit slot.
3. Take out the label rape and remove the blue card.
4. Make sure the end of tape passes through both tape guides. Then extend about 3cm (1.18 inch) label tape.
5. Install the label tape as instructed and press firmly, and make sure the extended tape passes through the outlet of label maker.
6. close the label tape compartment cover.

Downloading the App

NOTE

• This product must be used with the App.
• You need to connect the label maker through the Print Master app.
• In compliance with Google’s requirement, Android phones must enable GPS (Location Services) before using Bluetooth.

Method 1: Use your phone to scan the QR code to install the App.

Method 2: Search for “Print Master” in the app store on your phone to download the App.

Connecting the label maker

1. Turn on GPS (Location Services) (Android devices only).
2. Open Print Master.
3. tap the “connect now” button to search for your device.
4. Press “Start using”.

NOTE:

• In compliance with Google’s requirement, Android phones must enable GPS (Location Services) before using Bluetooth.
• Before connecting to your device in Print Master, please make sure your label maker is turned on and your phone’s Bluetooth is on.

How to Print

1. Press “New ” to start editing.
2. After the printing is complete, press the cutter button and take out the label.
3. Remove the backing from the label to expose the adhesive, and then attach the label.

Print Head Maintenance

1. Turn off the label maker.
2. Use a cotton bud with a little ethyl alcohol.
3. Gently wipe the print head.
4. After the alcohol has dried off, turn on the label maker and press the power button twice to print the diagnostic page.

NOTE: Please do not scratch the print head with any hard object. If the print head is damaged, the label maker will not print properly.

Instruction for replacing cutter holder
If the label tape cannot be cut neatly after continuous use, please replace the cutter holder as shown in the following diagram.

Troubleshooting

Warranty

Thank you for choosing our label maker.

1. Our warranty provides “Exchange/Return” services within one year of purchase.
2. Please keep the warranty card in a safe location for future reference. If you have any problem or need on our product or this user manual, please feel free to contact our customer services. We will do our best to help you.

If you have any problem or need on our product or this user manual, please feel free to contact our customer services. We will do our best to help you.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

*RF warning for Portable device:
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

Maintenance Card

Documents / Resources

| Vixic P3200 Label Maker [pdf] Instruction Manual
P3200 Label Maker, P3200, Label Maker, Maker
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>