Vixic D210S Label Maker Potable Labeler Maker Machine User Manual

Vixic D210S Label Maker Potable Labeler Maker Machine

Please read this user manual carefully before using this product, and store it for future reference.

Contents Checklist

Note: The quantity of included label tape is subject to the actual delivery.

Specification

D2105

Tape width and maximum number of print lines| 3.5/ 6mm: 1 Line 9mm: 3 Lines

12mm: 4 Lines

Max Print Width| 9mm on 12mm tape
Print Technology| Thermal Transfer
Print Resolution| 180180dpi
Print Speed| 20mm/s
Cutting Method| Manual cutting
Automatically turns off after| 5 minutes
Automatic memory function| Support
Ribbon tightening function| Support
Consumables identification function| Manual selection
Power supply| Power Adapter or 6 AAA batteries
Item Size| 213mml16.Smm*61.5mm

/83.845.824.2 inches

Font Style| Norma l, Bold, Italic
Width| Normal,X2,Xl/2
Frame| Support
Label Length| The label length for each label depends on the label content, which is up to 800mm
Margin| Full: Equal margins on both sides are 25mm

Half: Equal margins on both sides are 12mm

Narrow: Equal margins on both sides are4mm

Mirror Mode| Support
D210S

Available Memory| 15 labels. Up to 80 characters per label
Switching upper case/Lower case| Press the A/a button to switch to upper case or lower case

Shortcut Keys

| G)Shift +Print key=Multiple Copies[l -9]

@Sh ift+ Number (0-9) =Access to special characters

Parts Description

1. Font size
2. Font type
3. Word width
4. Caps key
5. Print history key
6. Feed key
7. Menu key
8. Power key
9. Escape key
10. Print key
11. OK key
12. Cursor key
13. Shift key
14. Symbol key
15. Label setting key
16. Barcode key
17. Frame key
18. Mirror mode key
19. Space key
20. Accent key
21. File key
22. Enter key
23. Delete all key
24. Backspace key
25. Font orientation key
26. Multiple labels editing key

Turning on the Power

• The method I: Power on with the adapter
• Method II: Power on with AAA alkaline battery

Installation for Label Tape

1. Take out the label tape and remove the blue card.
2. Make sure the end of tape passes through both tape guide 1 CD and 2 , then extend the end ‘ of the tape by about 1.18 : inch (3cm) from tape guide 2.
3. Turn the toothed wheel in the direction of the arrow on the label tape until tight to avoid damage.
4. Install the label tape correctly as indicated, and make sure that the extended tape comes out through the tape exit slot of label maker.

Note: We recommend installing label tape after the label maker power on.

Common Functions

Language

Select label width

1. When using the label maker for the first time, install the label tape and select the label width. Use the : navigation keys to select the label width.
2. Whenever you replace the label tape during use, you need to re-select the label width.

Text format

1. Font Size

2. Font Style

3. Width

4. Symbols & Punctuation

5. Frame

6. Switching upper case/ lower case

   • Press( A/a) key to switch to upper case or lower case.

7. Setting margins

   • Margin function sets equal margins on both sides of the text
   1. note: After setting [Half] and [Narrow], the display shows the label length from the printed dots (:) to the end of the label
   2. In order to save label tape, set the margin to [Narrow]
      

8. Entering multiple lines of text

   • 12mm wide label tape: Support print 4 lines of text, After entering the 4th line of text, do not press the [Enter] key, otherwise the error message “Please reduce the number of lines!” will be displayed .
   • 9mm wide label tape: 3 lines of text can be printed. After entering the 3rd line of text, do not press the [Enter] key, otherwise the error message “Please reduce the number of lines!” will be displayed.
   • 3.5mm, 6mm wide label tape:! line of text can be printed, after entering the first line of text, do not press the [Enter] key, otherwise the error message “Please reduce the number of lines!” will be displayed.

Clearing

1. Press [BS (backspace) key] to delete the letters one by one
2. CD To delete all text and format:
3. To delete all text only:

Label printing function

1. Printing single copies
2. If you need only 1 copy of the label, press [print key]
3. To prevent damage to the tape, do not touch the cutter lever while the screen displays “Printing ….. ” or “Feeding .. .. . “
4. To cut off the label, push the tape cutter lever on the upper-right corner of the printer
5. Peel the printed label from the backing and apply the label
6.  Printing multiple copies
   • Use the navigation keys to select the number of copies
   • The number of copies can also be specified by pressing a number key
   • Note: Up to 9 copies of each label can be printed at a time.

Multi-copy editing function

_ Note: _Multi-copy editing: Use this function to continuously edit up to 55 different labels.

Review/Modify the Text

1. Browse up and modify
2. Browse down and modify

Selection of Cutting Method

• Turn on Cutting (If print the label with “narrow margin” or “half margin”, or print several labels, it is recommended to turn on “Cutting” to manually cut the label one by one, and no need to cut by scissor.)
• • Turn off Cutting (Manually cut the whole label after printing, then cut the label by scissor when needed)

Note: Please do not press the cutter button before a reminder to cut, otherwise it will prompt “Cutter Error!” and the printing work will be terminated.

Set mirror mode

• Mirror mode must be turned off when using laminated label tapes
• Mirror mode must be turned on when using cloth label tapes and non-laminated label tapes

Saving label Files

Save up to 9 label files and recall them later for printing, allowing editing and overwriting of stored label files.

Save

Open

Note: If you try to store a label file when there is already a label file stored to that number, a message “Cover?” will appear. Press [OK key] to replace the previous label file with the new one. Press [Backspace key] to cancel.

Other printing types

Cable Wrap

You can create a label that can be wrapped around a cable or wire. The input text line is rotated 90°counter clockwise and printed on a label whose length is automatically determined by setting the cable diameter

Note: Only Flexible ID label tape can be used to print cable wrap labels.

Cable Flag

With this function, a label can be wrapped around a cable or wire with its ends stuck together to form a flag. The input text lines are printed at the both ends ‘ of a label. You can select the cable diameter. The label length is automatically adjusted according to the text length.

_ Note: _Only Flexible ID label tape can be used to print flag labels to label cable and wires. Use the cable flag function when the diameter of the object is less than 3mm.

Faceplate

1. Labels printed with this function can be used to identify various components or panels.

Barcode

You can print barcodes on labels with this function

1. Barcode Set
   • When you need to print a barcode on a label for the first time, you can choose a barcode set to do it.
   • Note: “Check”only appears on the LCD after selecting CODE39,ITF25 or CODABAR.
2. Barcode Input
   • When you need to reprint another label with the last  barcode you can enter text directly by barcode input

Entering accented characters

1. Press an alphabetic character, then press [accented character key], the accent options of that alphabetic character are displayed.

Note: To cancel the current operation, press [BS (Backspace)key]

Cleaning Guide for Label Maker

Use a cotton swab dipped in a small amount of alcohol, and wipe the print head gently.

1. The print head needs to be cleaned when printing is not clear.
2. Make sure the power is turned off and the power cord is unplugged before cleaning the print head
3. Wait until the alcohol evaporates and the print head is dry, then turn on the label maker to print and check the resulting print
4. Do not scratch the print head with a hard object, otherwise the print head will be damaged and the printing effect may be compromised.

Replacing the Cutter Holder

• If the label tape cannot be cut neatly after continuous use, please replace the cutter holder as shown in the following diagram.

QR code

• If you need user manual in other languages, please scan the QR code.

Troubleshooting

Additional Troubleshooting

Product Warranty Description

Product after-sales service is strictly based on the consumer protection law of the People’s Republic of China and the Product Quality law of the People’s Republic of China.

Services are as below

1. The free warranty period is 1 year from the date of purchase (according to the date of the official purchase invoice.
2. Within-days from the date of the purchase receipt, the user can choose to return, replace or get free repair service. Within—days from the date of receipt, the user can choose to replace or repair the product. Service is free of charge.
3. Free repair service does not include insurance, postage, shipping and other fees, nor does it include door-to-door service.

Non-warranty regulations are as follows

The warranty is void under the following conditions:

1. Exceeding the warranty period
2. Not presenting the original purchase invoice and the original warranty/ maintenance card together, or the warranty card does not match the invoice information.
3. Presenting a damaged warranty/ maintenance card(e.g. torn or tampered with) .
4. Altering product information.
5. Damage caused by unauthorized repair, disassembling. etc.
6. Damage caused by human error.
7. Damage caused by natural disasters such as earthquakes, floods, windstorm, lighting strikes, or external disasters such as fires and house collapse.
8. Failure or damage caused by harsh conditions (oil, dust, moisture, direct sunlight, etc.) or failure to use or care for the product as written in the instruction manual.

Please safekeep the warranty/maintenance card properly. The warranty/maintenance card will not be replaced if lost. Product warranty description takes effect with warranty/maintenance card properly filled in.

Warranty/Maintenance Card

• Replace
• Return

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>