HHETOGOL TTBZ02 Nightstand with Charging Station Instruction Manual

HHETOGOL TTBZ02 Nightstand with Charging Station

Product Information

The TTBZ02 is a versatile and durable tool that is designed to assist with various tasks. It comes with a range of features and specifications to meet your needs.

• Specifications
  • Model: TTBZ02
  • Weight: 15.33 lbs
  • Dimensions: 2 x 1 x 1 inches
  • Power Source: 1 G battery
  • Speed Settings: 4
  • Operating Temperature: -3 to +2 degrees Celsius
  • Capacity: 1 liter
  • Material: M and N
  • Output Power: 2 K
  • Noise Level: 1L

Product Usage Instructions

• Step 1: Tools Required
  • To use the TTBZ02, you will need the following tools:
  • X (1 piece)
  • S (2 pieces)
• Step 2: Assembly
  • Follow these steps to assemble the TTBZ02:
  • Attach X to the main body of the tool.
  • Connect the two S pieces to the designated slots on the main body.
• Step 3: Power On
  • To power on the TTBZ02, follow these instructions:
  • Make sure the G battery is fully charged and properly inserted into the tool.
  • Press the power button located on the main body of the tool.
• Step 4: Adjust Settings
  • The TTBZ02 offers various settings for different tasks. Follow these steps to adjust the settings:
  • Use the buttons labelled 1-4 to select the desired speed setting.
  • To change the operating temperature, use the button labelled I.
  • For material selection, use the buttons labelled K and L.
  • Adjust the output power using the button labelled V.
• Step 5: Operation
  • Once the TTBZ02 is powered on and settings are adjusted, you can use it for your desired tasks. Follow these guidelines:
  • For tasks requiring a capacity of 1 litre, use the M button.
  • For tasks involving materials M and N, use the O button.
  • For tasks involving materials P and Q, use the P button.
  • If you need to switch to a different speed setting, use the S button.
• Frequently Asked Questions (FAQ)
  • Q: What tools are required to use the TTBZ02?
  • A: You will need an X tool and two S tools to use the TTBZ02.
  • Q: Can I adjust the speed settings?
  • A: Yes, the TTBZ02 offers four different speed settings controlled by buttons 1-4.
  • Q: How do I power on the TTBZ02?
  • A: Make sure the G battery is inserted correctly and press the power button on the main body of the tool.
  • Q: What is the capacity of the TTBZ02?
  • A: The TTBZ02 has a capacity of 1 litre.

General Guidelines

• Please read the following instructions carefully and use the product accordingly.
• Please keep this manual and hand it over when you transfer the product.
• This summary may not include every detail of all variations and considered steps. Please contact us when further information and help are needed.

Notes

• The product is intended for indoor use only. The product must be assembled and used in accordance with the provisions of the manual.
• Personal injury and/or damage to the product may occur if products are used outside of their intended purposes and/or if products have been changed/modified from their original design.
• The seller does not assume any responsibility or liability with respect to any injury/damage caused by incorrect assembly or improper use.
• If there are any defective or missing parts after unpacking, please cease assembly immediately and contact us.
• Please assemble the item on a spacious surface and do not place the unwrapped product directly on the ground to avoid product damage.
• Please wear gloves during the assembly and disassembly process to avoid scratches from any sharp edges.
• Please match the corresponding part and fitting based on the part number in the manual.
• Firing assembly Tito set aligned screws with the responding preferred let holes and then tighten the screws one by one.
• Periodically inspect screw tightness while the product is in use. If necessary, retighten to ensure structural
• Frosa centre pool water rams her pa pid on projects a morose standest it ven product damage.
• Please place this item on level, solid ground during use.

Warnings

• Children are not allowed to assemble the product. During assembly, keep all small parts out of the reach of children as they may be fatal if swallowed or inhaled.
• Children are forbidden to climb or play on the product to avoid serious bodily injury caused by the toppling.
• The Ola Miami bag out of each o the end aside a postal dor place a self aims on it.

PARTS

HARDWARE

Tools Required

INSTALLATION

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>