CFIAI PB-08 Portable Charger Power Bank User Manual

PB-08
PORTABLE CHARGER WITH BUILT-IN CABLES
SUPER FAST CHARGE

USER MANUAL

Packing List

Packing Contents:

A.Portable Charger x 1
B. User Manual x 1
C.Type-C Charging Cable x 1

Product Introduction

1. Power button
2. LED display screen
3. Micro USB input
4. Type-C input/output
5. USB A output 1
6. Type-C Cable Output2
7. Lightning Cable Output3

Touch Control Power Button:

Touch once the power button, the power bank will turn on and LED will light to show the remaining power of the power bank.
When you connect the device with power bank, it will automatically charge your device without turning on the power bank.
f there is no operation within 10 seconds, the LED will light off.

About Charging

1. How to Charge this product:
   (1) Type-C input:
   1- 1). Plug the T ype-C port of our included charging cable into the Type-C input port of the power bank.
   (2) Micro USB input:
   1-2).Plug the Micro USB port of your own charging cable into the Micro USB port of the power bank.
   2). Plug the other end of charging cable (the USB port) into AC adapter or into a power supply device with a USB jack (such as a PC).

3. .When charging, the LED lights up and the LED digital display indicates the battery level.
   4).When the LED digital display shows “100%”, the battery is fully charged.
   5).When charging is complete, remove the power bank from the USB external power supply.
   *The AC adapter is not included with this product.
   Notice:
   ** Please use 2A or more USB external power device.
   Check the orientation of the connector and connect it in the correct direction.
   

2. How to charge your device:
   1. Charging the device using the output port:
   (1) Take out the charging cable inside the box and connect the corresponding port to the device you need to charge. Plug the other end of the charging cable into the USB or TYPE C port of our power bank.
   (2) Automatically start charging when the device is connected. While charging, the LED lights up and indicate the battery level of our product.
   (3) During charging, when the battery allowance of our product is insufficient, the LED will flash.
   (4) When the charging is complete, disconnect our product and your device.
   2. Charging the device using the built-in cables:
   (1) Take out the built-in charging cable and connect the correspond­ ing port to the device you need to charge.
   (2) Automatically start charging when the device is connected. While charging, the LED lights up and indicate the battery level of our product.
   (3) During charging, when the battery allowance of our product is insufficient, the LED will flash.
   (4) When the charging is complete, disconnect our product and your device.
   * When the connection is disconnected, the power of this product is automatically turned off.

• Although this product uses the USB terminal, it does not guarantee all products can be charged by USB. Depending on the combination of devices, it may not be possible to charge two device at the same time. In that case, please  charge them separately.
• Charging may not start when your device is close to full charge.
• Output current may be limited when the battery level of this product is low.

Specification

9V 2A,12V 1.5A
Lightning Cable Output3:| 5V 2.4A,9V 2.2A

Tips
A:Fails to charge our power bank:

1. The connection between our product and AC charger is incorrect.
2. Check whether the AC charger/charging cable work properly.

B:Fails to charge your device:

1. Power bank is low power, please charge it. We recommend that youfully charge the power bank before using it for the first time.
2. Check if the connection between the charging cable and power bank is loose.
3. Replace a charging cable to charge your device to see if the charging cable can work.
4. Change the output port to charge your device to see if the port can work.
5. Please ensure the operate order: Firstly, connect the charging cable with power bank. Secondly, connect the another end of the chargingcable with your devices.

Pis Notes:

• We suggest you please charge power bank in full for the first using.
• The Micro USB port is for input only.
• The two input ports may not be used at the same time.
• Micro cable, Lightning cable and AC adapter not included.
• Use the included cable (Type C charging cable) or original cables will help power bank used long time.
• The power bank is flight-approved and allowed on a plane. Please carry it with you and do not check it in.

Important Safety Instructions

When using this product, basic precautions should always be followed including the following:

1. Store product in a cool and dry place.
2. Do not store the product in hot or humid environments.
3. Do not dispose of the product in heat or fire.
4. Do not clean the product with harmful chemicals or detergents.
5. Please store it out of the reach of little children.
6. Misuse, dropping, or excessive force may cause product damage.
7. Using a power supply or charger that is not recommended or sold by the product manufacturer may result in a risk of fire or personal injury.
8. Do not use connectors once the terminals are bent.
9. When connecting the connector, check the insertion direction and insert the connector directly.
10. Operating temperature should be between 32 F to 113F/OC to 45C.
11. The power USB interface of this product is specially used for charging and powering USB devices. Please do not use this product for other purposes.
12. If the battery is hot or abnormal, please discontinue use immediately.
13. Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or personal injury.
14. If the product is not being used a long time, it should be charged and discharged every three months.
15. The product may feel warm when charging the device, which is a normal operating situation and should not be a cause for concern.
16. In normal conditions, the battery pertormance will decline over several years.
17. When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
18. Do not dissolve or reshape. We are not liable for the trouble and inconvenience caused by the decomposing and remodeling.

After-sales Service

If you have any questions while using the product, You can contact us in the following ways, it will be our pleasure to support you.

1. Go to the Amazon website and log in to your account.
2. Click on the “Orders” button located in the top right corner of the screen.
3. Locate the order that you need help with and click on the “Contact Seller” button.
4. Choose the reason for your inquiry from the drop-down menu and provide a brief description of your issue.
5. Click on the “Send” button to submit your message to us.
6. Alternatively, you can also go to the product details page on Amazon and click on the “Ask a Question” button.

When describing your issue to us, we recommend that be concise and clear, preferably with pictures showing the problem. This will help us understand your problem and provide you with the best solution as soon as possible.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>