Kenmore PM3025 Smart 1500e Series Air Purifier User Guide

: June 16, 2024
: Kenmore

Table of Contents

Kenmore PM3025 Smart 1500e Series Air Purifier
Product Usage Instructions
Understand Your Air Purifier

Kenmore PM3025 Smart 1500e Series Air Purifier

Specifications

Product Name: SMART 1500e Series Air Purifier
Compatible Networks : 2.4GHZ WiFi networks
Compatible with: Apple iOS11 and above & Android 6 and above

Product Usage Instructions

Set Up Your Air Purifier

Place the air purifier on a level surface.
Remove the filter doors on both sides of the air purifier by pulling on the clasp of the doors.
Remove the packaging from both filters and re-insert them back
into the air purifier.
Important: Do not run the unit without removing the packaging from the filters.
Once the filters are reinstalled, install the filter doors back into place.
Position the unit on a level surface and away from anything that would block airflow (e.g., curtains).
Insert the power adapter into the power port on the back of the air purifier.
Plug the power cord into an electrical outlet and tap the Power
Button to turn on the unit. The unit will enter AUTO mode.
Download the Kenmore SmartTM app to your device and create a profile.
Open the Kenmore SmartTM app on your device and follow the on-screen prompts to set up your air purifier.

Note: Check your network and smart device settings as the Air Purifier supports 2.4GHZ WiFi networks and is compatible with Apple iOS11 and above & Android 6 and above.

Understand Your Air Purifier

Tap On/Off Button to turn on/off the air purifier. Tap the Mode button to switch the air purifier into AUTO mode, SLEEP mode, or Manual mode. The corresponding light will turn on to indicate the mode. Fan speed automatically adjusts as your air quality changes.

Sleep Mode – the fan will run at the lowest fan speed and the display screen turns off. To exit this setting, press any button.

Tap the Fan Speed button to manually choose between 5 fan speeds.

Set a timer.

FAQ (Frequently Asked Questions)

1. Where can I find the full product instructions or purchase replacement filters?

You can visit kenmorefloorcare.com/smart-1500e- series/ for full product instructions or to purchase replacement filters.

quick start guide

Follow these easy steps to get started with your Kenmore air purifier.
Please be sure to read the Use & Care Guide prior to using your air purifier.

WARNING
Before first use, remove filters from unit and discard protective filter packaging.

SET UP YOUR AIR PURIFIER

Place the air purifier on a level surface.
Remove the filter doors on both sides of the air purifier by pulling on the clasp of the doors.
Remove the packaging from both filters and then re-insert the filters back into the air purifier.
IMPORTANT : Do not run the unit without removing the packaging from the filters.
Once the filters are reinstalled, install the filter doors back into place. See visual description below.
Position the unit on a level surface and away from anything that would block airflow (ex: curtains).
Insert the power adapter into the power port on the back of the air purifier. Plug the power cord into an electrical outlet and tap the Power Button to turn on the unit. The unit will enter into AUTO mode.
Download the Kenmore Smart™ app to your device and create a profile.
Once downloaded, open the Kenmore Smart™ app on your device and follow the on-screen prompts to set up your air purifier.
TIP : Check your network and smart device settings as the Air Purifier supports 2.4GHZ
WiFi networks and is compatible with Apple iOS11 and above & Android 6 and above.

SCAN HERE

Or Visit

kenmorefloorcare.com /smart-1500e-series/ for full product instructions or to purchase replacement filters

UNDERSTAND YOUR AIR PURIFIER

Tap On/Off Button to turn on/off the air purifier.
Tap the Mode button to switch the air purifier into AUTO mode, SLEEP mode or Manual mode. The corresponding light will turn on to indicate the mode.
Fan speed audomatically adjusts as your air quality changes.
Sleep Mode – the fan will run at the lowest fan speed and the display screen turns off. To exit this setting, press any button.
Tap the Fan Speed button to manually choose between 5 fan speeds.
Set a timer.
Child Lock – to activate or deactivate, hold down the ‘Mode’ and ‘Fan Speed’ buttons simultaneously for more than 3 seconds.
When the last frame of filter life indicator flashes, press and hold the Filter Reset button for more than 3 seconds to reset the filter meter after installing new filters.
Wi-Fi Indicator – flashes to indicate the pairing mode; illuminates steadily to indicate successful connection of the air purifier to the Wi-Fi network; turns off to indicate the unit is not connected to Wi-Fi network.