NIUEN J60 Wireless Lavalier Microphone User Manual
- June 16, 2024
- NIUEN
Table of Contents
User Manual
Wireless Lavalier Microphone
Introduction
Thanks for choosing our product.
This is a smart wireless microphone that provides professional-grade recording
output. Plug and play, no app required. Multiple uses: It can be used in live
streaming, Vlog shooting, interviewing, online course and other occasions.
The wireless microphone consists of microphone transmitter and receiver. (As
shown below)
ID Diagram
- Windproof net
- Microphone inditator
- Microphone charging port
- Microphone clip
- Power button
- Port to connect phone
- Port of receiver
- Receiver indicator
*The function of 7 will be explained in detail later.
Hou to use
Step 2: Long press the power button of the microphone for 1-2 seconds,and the
indicator light will turn green, which means the power is on successfully.
Step 3: When the red light on the receiver is always on, you can turn on your
phone‘s camera, live streaming APPs to use the microphone to pickup sound.
Special Note:
The usage method of ⑦ is as follows: there is no battery in the receiver, no
need to charge. When the phone’s battery is low, please use the phone’s
charging cable to plug into the port on receiver to charge the phone.
About UI
Microphone Transmitter
| Function | How to use | Light |
|---|---|---|
| Power on | Long press for 1 -2 seconds | Green light on |
| Power off | Press power button for 3 seconds | Light off |
| Pairing | Red and green flash alternately | |
| Paired | Green light keeps on | |
| Mute | double-click the button to turn on or off | the green light flashes |
slowly when mute
Low battery alarm| Power on state| The red and green lightscome on every 10
seconds
Charging| Charging with cable| The red light goes outwhen it is fully charged
Receiver
| Function | How to use | Light |
|---|---|---|
| Power on | Plug in the device | light on |
| Power off | Unplug the device | Light off |
| Pairing | Light flash slowly | |
| Paired | Light always on |
REVERB MODE: Press the START BUTTON 3 times continuously to enter reverb mode
Product support and listening function
This microphone comes with noise reduction, which will enter the noise
reduction mode when it is powered on.
Packing List
Content of packing
- Microphone transmitter x2
- Receiver x1
- Charging cable x2 (only for charging the microphone)
- User Manual x1
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>