Hikenture 1093-B3-US Self Inflating Sleeping Pad User Manual
- June 16, 2024
- HIKENTURE
Table of Contents
Hikenture 1093-B3-US Self Inflating Sleeping Pad
The product image in instruction is for illustration purpose only and may look different from what you actually received.
SAFETY INSTRUCTION
Caution
- It is possible that the mattress could not self-inflate on FIRST USE due to long-term transportation in vacuum compressed condition.
- Please use the included pump sack to inflate the mattress on first use.
- DO NOT leave inflated mattress with valve closed in tent for long on hot days.
- Please leave the valve open when mattress is not in use.
- DO NOT expose to open flame.
- Not suitable for water sports. This mattress is not a water recreation product.
Storage
Make sure the mattress is completely dry before storage to avoid mildew of the
fabric.
Part List
- 1x self-inflating sleeping pad
- 1x carry bag
- 1x pump sack
Scan the QR code for Detailed Instruction Video:
Please feel free to contact us for any problem.
Inflation
- Unpack the mattress.
- Unscrew the cap of the valve, rotate the air valve to make sure the “inflate” side faces outward.
- Let the mattress self inflate to about 70% (5-8 minutes) NOTE: Please use the included pump sack to help inflate the mattress ON FIRST USE.
- Connect the pump sack to the valve.
- 0pen the pump sack, allowing it to fill with air, then seal and roll the air into the sleeping pad. Repeat this step until desired firmness is reached (1-3 Bags).
- Tighten the air valve.
Deflation
- Unscrew the cap of the valve, rotate the valve to make sure the “deflate” side faces outward.
- Fold the mattress from the end without valve and push to deflate most of air.
- Roll up the mattress from the end without valve and let the remaining air out.
- Tighten the valve.
- Tie up the mattress with included straps.
- Pack it into the storage bag.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>