TOOLS & BATTERIES
User Manual
V10 PRO
Jump Starter Model No.: JS-391

Thank you for choosing V10 PRO! For safety, follow instructions carefully and keep this manual handy.

PRODUCT LAYOUT:

OPERATION GUIDANCE

1. Storage Level Indicators
   Press the switch to check the Jump Starter’s battery level

The indicator will flash sequentially while the Jump Starter is charging.
The number of lit indicators corresponds to the Jump Starter’s storage level. Once fully charged, all indicators will turn off.

Epower Charging Instruction:

1. Connect the USB cable with the home adaptor and then plug the home adaptor into the universal socket.
2. Connect the USB-C connector to the V10 PRO host.

Instruction for Jumping start 12V vehicle(by Intelligent jumper cable):

1. Fully insert the blue plug into the host.

2. Attach the Red Clamp to the positive (+) battery terminal and the Black Clamp to the negative (-) battery terminal.

3. Follow the Cable Indicator’s instructions for operation:
   GREEN LIGHT on:
   Telling the connection is correct and the circuit is working, you can turn on the engine to jump-start directly. GREEN LIGHT blinking: Saying the vehicle battery is low, press the “BOOST” button, wait GREEN LIGHT becomes solid, then turn on the engine within 30s. REVERSE RED LIGHT on: Telling the connection is wrong, to correct the clamps as step 2 mentioned above, wait until the GREEN LIGHT is on to turn on the engine. No Lights on: Saying the vehicle’s battery maybe damaged, after confirm the clamps connection is correct, press the “BOOST” button, wait GREEN LIGHT is on, and then turn on the engine within 30s.

4. Start the vehicle.

5. When the vehicle is started, remove the jumper cable from the vehicle battery. Leave the vehicle’s engine running.

Charging Cell Phone or Tablet Instruction:

1. Plug the switch cable to Quick Charge output port.
2. Select appropriate connector and connect it to your mobile phones or tablet.
3. Press the switch button to charge.

For power supply to vehicle products or electronics

1. Plug the optional switch cable to 15V 10A output port.
2. Connect the optional switch cable and vehicle product or electronics.
3. Press the switch button to power supply.

LED flash light
Press the switch 3 seconds to start the LED flash light.
There are 3 modes of LED light appear in order (normal. strobe. SOS. off) if you press slightly.

PARTS LIST ：

| Parts Name| Quantity

---|---|---
1| V10 PRO| 1
2| Charging cables| 2
3| Intelligent Jumper Cable| 1
4| User Manual| 1
5| Storage case| 1

TECHNICAL SPECIFICATIONS：

FAQ:

Q. How to turn off this V10 PRO?

A. V10 PRO will power off automatically when no load or charging is complete.

Q. How long time to full charge the V10 PRO?

A. Approx. 5-6 hours through the USB-C input.

Q. How many times can this appliance charge for my cell phone?

A. Depend on the battery capacity of your cell phone. Take iPhone13 as an example,can full charging 6 times.

Q. How many times can this appliance jump start the 3.0L Gasoline vehicle if it is in full battery?

A. Approx. 70 times on a single charge.

Q. How long the storage of battery will remain?

A. 24 months, however, we suggest to recharge it every 3 months to extend battery life.

TROUBLE SHOOTING：

No response when pressing the switch
button.| Low voltage protection of Jump Starter is
started.| Low voltage protection Plug the adapter into the USB-C input port to activate.

TOXIC AND HARMFUL SUBSTANCES:

Composition and amount of toxic and harmful substances in V10 PRO.

Pb| Hg| Cd| Cr(Vi)| PBB| PBDE
O| O| O| O| O| O
O: Indicate all homogeneous materials’ hazardous substances content are below the MCV limit specified in the Standard 2002/95/EC(RoHs).

WARNING:

1. Read the instruction manual carefully before using this unit.
2. Do NOT use in place of a vehicle battery.
3. Do NOT use as a toy.
4. To reduce the risk of injury, close supervision is necessary when the product is used near children.
5. Jump for 12V vehicles , it would be hazard if for other jumping.
6. Use of an attachment not recommended or sold by power pack manufacturer may result in a risk of fire, electric shock, or injury to persons.
7. Do NOT connect the two clamps together.
8. Before starting, ensure that there is no corrosion at the interface and no foreign matter adheres. Connect the main unit to the battery holder tightly to avoid the impact of the interface connection.
9. After successfully starting the car, please remove the product from the car battery within 30s, otherwise it may cause damage.
10. Do NOT Jump Start more than 3 times in a row,It could damage the unit by overheating. When starting up multiple times, each start-up interval is two minutes.
11. Don’t use the jumper cable to charge other equipments.
12. Do NOT store in locations where the temperature may exceed 60℃
13. Charge only at ambient temperature between 0℃ and 45℃.
14. Do NOT expose the product to rain or water
15. Do NOT expose product to extreme heat or fire.
16. Do NOT operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
17. Make sure someone should be within range of your voice or close enough to come to your aid when working with batteries.
18. Remove personal metal items like rings, bracelets, necklaces, etc. When using the products.
19. To reduce risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the power pack.
20. Do NOT use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
21. Do NOT use a battery pack or appliance that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire, explosion or risk of injury.
22. Charge only using the charger provided with this unit or the same standard with the host input port.
23. After jump start the car,don’t charge this unit immediately.
24. Do NOT use the unit to jump start a vehicle while charging the internal battery.
25. Under extreme conditions, the battery may leak. If a liquid is noticed coming from product do not handle with bare hands. In case of skin contact wash with soap and water immediately. If liquid comes in contact with eyes rinse eyes with cold running water for at least 10 minutes and get medical attention immediately.
26. Product contains lithium based battery, at end of product life dispose of product according to local regulation.

Customer Service
18 Months Limited Warranty Service
Lifetime Technical Service
Feel Free to Contact Us
Support@vtoman.com
For FAQ and More Information
Support@vtoman.com
Made in China

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>