VTOMAN V12 Jump Starter User Manual
- June 14, 2024
- VTOMAN
Table of Contents
User Manual
Jump Starter
Model: V12
WELCOME
Thank you for choosing the jump starter.
This is a jump starter with a 100W AC output port that can safely jump start
your car or charge your devices with a rated power of lower than 100W,
including laptops, smartphones, tablets and so on. To ensure a good user
experience, personal safety and property security, please read all of the
instructions carefully before using this product, please keep this manual for
easy reference.
Please charge it first!
While reading the manual, you could start to charge your V12 with the
provided wall charger.
Warning!
This device can be applied to cars and equipment with 12V batteries. It can be
dangerous to be used with other types of batteries, so please read and make
sure you understand the safety information in this manual before you use the
jump starter. Any incompliance with the safety guidance could damage the
starter, or even worse cause electric shocks, explosions, fires, property
losses and physical injuries.
PACKAGE & CONTENTS
PRODUCT PARTS AND FUNCTIONS DESCRIPTION
1. 12V Jump Start Output
2. AC Power Button
3. AC Output Port (100W, 110V-60HZ)
4. Power Indicators
5. Power Button| 6. USB-C In Port (18W Max)
7. USB-A1 Out Port(5V/2.1 A)
8. USB-A2 Out Port (QC3.0, 5V/3A, 9V/2A, 12V/1.5 A)
9. DC Out Port (15V/10A)
---|---
BASIC OPERATION
Indicators
Press the switch to check the charge level of V12:
Short Press
Indicator | Unlit | 1 solid | 2 solid | 3 solid | 4 solid |
---|---|---|---|---|---|
V12 Power level | 0% | 25% | 50% | 75% | 100% |
The V12 will automatically power itself off to save power when not in use.
Using The Multi-Mode Led Flashlight
Long press
How to turn on the LED flashlight Press the power button until the indicator
turns on (for about 3 seconds)
Short press
How to switch mode and turn off the flashlight
A short press on the power button will switch the mode in turn to bright
light, strobe, SOS , strobe( Red ), SOS (Red)and turn-off.
KEY POINTS
100W AC socket: VTOMAN portable jump starter is equipped with AC output
port with a power of 100W. The laptop runs out of battery while you are
working outside? Need a fan outdoors in the heat? A portable 110V AC output
port can meet a variety of your daily demand, it can be used to charge and
power a wide range of devices, including laptops, cameras, drones, and other
small appliances. This is an extraordinary portable jump starter with star
performance that caters to emergency needs during travelling, outdoor work or
power cuts.
Upgraded jump starter: With a peak current of 3500A,the robust car battery
jump box can quickly jump start your vehicle within 1-3 seconds – up to 50
jump starts on a single fully charge. Highly suitable for trucks, motor
vehicles, snow mobiles, ATVs, UTVs, hay mowers and yachts. With its company,
you no longer need to worry about dead batteries or having to ask for the help
of passers-by and setting up jumper cables between cars just to start your
vehicle at midnight or during road trips.
20000mAh Battery Backup: The VTOMAN lithium battery jump starter provides
enough juice to power for 12″ MacBook to work for 8 hours, an iPad Mini for 20
hours, an iPhone X for 6 times. It boasts double-USB outputs with a maximum
power of 18W, Type-C output (5V/2A,9V/3A),DC output (15V/10A) and convenient
LED floodlight so that it can serve as a backup source of power supply during
power cuts to revive your electronic gadgets. It would be your best partner
during not only trips, but also winter storms and hurricane seasons.
Discharge rate: V12 typically discharges at a rate of 2-3% per month after it
is turned off for storage. With a super-long standby duration of 24 months, it
won’t incur excessive power losses while it is shelved. In other words, if you
restart it 6 months later at a battery life of 100%, you would have 82-88% of
the battery available for use (3 bars), enough for powering your car in most
cases. However, for safety purposes, we suggest that you charge it to 100%
every three months in order to provide the maximum power in case you need.
Compact & Lightweight:Designed with slim size (8.82 3.971.57 inches) and
lightweight (1.78 lbs), easy to put it in your backpack or car and take it
with you wherever you need power. Cold Weather Storage: The V12 can safely
jump start the vehicle from -4°F(-20 ℃ ) to +131°F(55 ℃ ) .Note that while it
is safe to jump start the device in these temperatures, room temperature(72°F)
is considered optimal operating range.If at all possible, we recommend
bringing the V12 to room temperature before using for maximum effectiveness.
If this is not possible, you may find that the first attempt at jump starting
will produce a weak output,but this is nomal. One advantage of lithium
batteries is that they warm up fast from use. After each attempt wait at least
30 seconds to allow the battery to warm up sufficiently before attempting next
boost, and do not crank for more than 5 seconds per time.
Advanced Protection System: Heavy-Duty jump clamp is constructed with
intelligent circuit protection functions which has 10 protections, making the
car battery jump starter safe for anyone to initiate the dead battery without
producing sparks or damaging the car’s electrical system. It doesn’t get warm
or pose any kind of safety risk.
JUMP STARTING A VEHICLE
-
Make sure the unit is over 50% charged (check the battery indicator ≥ 2 bars).If the device has not been used for over two months, please charge it first.
-
Connect the smart jumper cable to this device and make sure that the two indicators on the cable are off.
-
Connect the battery terminals to the polarities of the car’s storage battery. The red terminal should connect to the positive end (+) while the black terminal, to the negative end (-).
-
Start your vehicle, if your vehicle fails to start or you see a red light or hear buzzing, please refer to the next page for troubleshooting.
-
After the car is starting, remove the jumper cable from the battery.
-
Remove the cable from V12.
Check the indicators on the jumper cable, and operate in accordance with the instructions below:
GREEN LIGHT ON :Indicating that the connection works well and emergent starting is enabled.
RED LIGHT WITH BUZZING: Indicating that terminals have been connected to the wrong polar of the battery. Please reconnect according to step 3 until the green light is on before emergent starting.
GREEN LIGHT BLNKING: Indicating that the voltage of the storage battery is too low. Press the BOOST button until the green light is on, and start within 30 seconds.
NO LIGHT AND NO BUZZING: Indicating that the storage battery may have been damaged. Please ensure that terminals have been connected to the correct polar, then press the “BOOST” button, and finish the starting operation within 30 seconds when the green light is on.
CHARGING THE DIVICES
How to charge smartphones, tablets and other electronic devices:
- Insert the charging cable into the USB-A port (Type-C port) and your device.
- Press the power switch. This jump starter can automatically identify and charge your device. The indicator of the battery will light up when charging.
How to charge laptops (via the AC output port):
Insert the AC power plug of the laptop (or other electronic devices with a
rated power of 100W and below) into V12’s AC output port.
Press the AC power switch. The indicator of the battery will light up when
charging.
DC output
The DC output port is designed to provide mobile power for 12V equipment such as air compressors and GPS devices. The port is rated for a maximum output of 15V/10A. As with any battery, the output voltage varies depending on the level of remaining battery life.
- Insert the 12V cigar lighter adaptor or compatible power plug into the output socket.
- Short press the power button to turn V12 on. It is now ready to power your devices.
TIPS & TRICKS
Be sure to check the power of the device you are trying to power as this port
is limited to a 10A draw. Anything above that will cause power to be disabled
to the port.
CHARGING THE V12
The battery life indicators will keep flashing while V12 is charged. The
number of long-on lights indicates the actual remaining battery life of the
product. When all four indicators are off, it indicates that the charging
process is suspended or ended.
How to charge V12
Step 1: Plug the USB Type-C end of the included charging cable into the V12.
Step 2: Plug the other end of the USB charging cable into the Type-A port of
the wall charger.
SPECIFICATIONS
Dimensions: 22410140mm
Weight: 808g
Battery capacity :66.6Wh
Start current: 550A
Peak current: 3500A
USB-A1 output: 5V/2.1 A
USB-A2 output: QC3.0 (5V/3A, 9V/2A, 12V/1.5 A)
USB-C input/output: 18W Max
AC output: 100W, 110V-60Hz
DC output: 15V/10A
Operating temperature:-20 ℃ -55℃ /-4 F-131 F
Number of charge and discharge cycles: ≥ 1000
Full charging time: about 5 hours
TROUBLESHOOTING
Phenomenon | Reason | Remedy |
---|
V12 has been charged for a long
time but the fourth indicator keeps
flashing.| Problems with battery
life identification.| Disconnect the charging cable and
reconnect, and continue to charge
for several hours.
Press the power switch but there is
no reaction.| Low voltage protection has been
initiated.| Charge the device with a wall charger in order to activate it.
V12 cannot be charged. The first
indicator keeps flashing.| Excessive discharging or device deficiencies.|
Please contact us at support@vtoman.com
V12 is extremely hot or swells.| Excessive discharging or device deficiencies|
Please contact us at support@vtoman.com
In case of any problem with the device itself, please contact us at
support@vtoman.com . We will try to solve the
problem within 24 hours.
Toxic and harmful substances
Pb | Hg | Cd | Cr(Vi) | PBB | PBDE |
---|---|---|---|---|---|
o | o | o | o | o | o |
o: Indicating that the content of toxic and harmful substances in all homogeneous materials used in the device is lower than the limit as specified by the 2002/95/EC (RoHs) standard.
FAQ
How to turn off the portable power source?
The product has a smart detection function. Once there is no load or the charging process is over, it will automatically switch to the sleep mode to reserve power.
What is the operating temperature of this unit and how to store it?
This unit is lithium polymer battery, operating temp is -20-55 °C/ -4-131ºF.If the ambient temperature is higher than 55°C/131°F, the internal construction of the polymer lithium-ion cells will be damaged, it may swell and become unsafe. So don't store the device in vehicle which parked in hot weather for long periods of time.
How to start a vehicle with this unit?
What if I cannot start a car with this device?
Charge this device to the full, and press the “BOOST” button after it is properly connected to the car’s battery. Start the car within 30 seconds after the green light is on. If it still does not work, please contact us at support@vtoman.com while specifying your order ID.
What if I cannot charge other equipment with this?
Try to use another cable to charge your equipment. If it works, it means that something is wrong with the cable we have provided. We will replace it for you. But if it still doesn’t work, please contact us at support@vtoman.com while specifying your order ID.
Could I use the jump starter to charge other devices while it is charged?
Yes
Could I use the jump starter to charge other devices while I start the car?
No
How often should I charge the jump starter?
It would be best to recharge it every 3 months.
After I charge V12 to the full, how long can I put it on shelf before using it again to start a car?
The circuit design of V12 is very scientific. It can be shelved for 6-24 months without use.However, in order to prolong the service life, it is recommended to charge it every 3 months.
WARNING
- Please read the User Manual carefully before using this appliance.
- Please use this device in accordance with the instructions, or you could damage the device or your car’s battery.
- Please do not let those without proper knowledge or ability to operate this device without supervision.
- Please do not use this product as a toy. Keep it away from children for safety.
- This device is compatible only with cars and devices with 12V storage batteries.
- Please stop using this device when any cable, clip or wire is damaged, or when it is overheated, swells or leaks.
- Please do not use it as a car battery or battery charger.
- Please do not use this device to start your car while charging the built-in battery.
- Please only use the jumper cable provided to start your car and a qualified charger to power this device.
- Do not over-discharge (don’t let the battery die) and charge regularly, preferably every 3 months.
- Make sure the blue plug of the jumper cable is fully inserted into the battery clip output port, otherwise the blue plug may melt.
- Before starting the device, please ensure that the battery terminals are clean and the battery clips are properly connected. If the battery terminals on the car are dirty or corroded, this device’s power output will reduce.
- Do not start the vehicle more than four times in a row within 10 minutes. If the engine fails to start within 3 seconds after the initial start, stop the start and wait at least 30 seconds before trying again.
- After pressing the “BOOST” button, do not reversely connect the clip of jumper starter to the battery to avoid accidents.
- Do not charge the product immediately after the car starts. Please wait for it to cool down for 30 minutes before charging.
- Do not put this device in water.
- Do not use this product in explosive environment with the presence of flammable liquid, gas or dust.
- Do not modify or disassemble this device. Only maintenance technicians can repair it.
- Do not expose this appliance to extremely hot conditions or fire.
- In extreme conditions, the batteries could leak. If the device has liquid leakage, do not handle it with bare hands. In case of skin contact, wash immediately with soap and water. In case of contact with eyes, flush your eyes with cold water for at least 10 minutes and seek medical treatment immediately.
- The device contains lithium batteries. At the end of product life, or if the equipment leaks liquid, please dispose of it in accordance with applicable laws and regulations.
MAINTENANCE AND SUPPORT
Your Warranty Includes
18 Months of Online After-Sales Service
Within 18 months, we will provide timely and effective online after-sales
service after you purchase this device.
30 Days Refund Guarantee
Within 30 days after you buy this product, if you have any questions, you can
apply for return on Amazon.
30 Days to 18 Months
We will replace defective equipment due to manufacturing problems with a new
piece within 18 months after your purchase.
Disclaimer
A. When the product needs repair or replacement, the buyer shall present the
original receipt (order ID) to validate the warranty.
B. The warranty does not apply to damages or device failures as a result of
normal wear and tear, physical abuse, improper installation, misuse,
modification, or damage caused by unauthorized third-party maintenance.
C. We shall not take responsibility for any accident or indirect damage as a
result of misuse of this product.
D. All warranty claims are limited to repairing or replacing defective
products, at VTOMAN ’s sole discretion.
Attention
Do Not Submerge In Water
Do Not Disassemble
Do Not Drop
Avoid Extreme Temperatures
Do Not Place Near or Into Fire
Customer Service
18 Months Limited Warranty Service
Lifetime Technical Service
Feel Free to Contact Us
support@vtoman.com(recommend)
Thank You for
Choosing Us!
Made in China
Documents / Resources
|
VTOMAN V12 Jump
Starter
[pdf] User Manual
V12 Jump Starter, V12, Jump Starter, Starter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>