LOVENSE 54654 Solace Automatic Electric Masturbator Cup User Manual
- June 16, 2024
- LOVENSE
Table of Contents
LOVENSE 54654 Solace Automatic Electric Masturbator Cup
Charging
Once it is fully charged, the solid red light will turn off.
Turn On/Off & Start/Stop thrusting
Changing setting
Cleaning
After Solace has stopped, press button B for 3 seconds to let the head of the inner holder come out.
Gently press both sides to pull out the inner sleeve and inner holder completely.
Only the inner sleeve and the sleeve holder can be washed with water. After, dry them thoroughly.
Put the inner sleeve back into the sleeve holder and make sure the plastic ring sits in the groove.
Insert the inner holder back into the main body.
You will hear a click when it is stored correctly.
Desk mount
- Attach the desk mount to the main body by turning screws (X) clockwise.
- Mount the main body to the desk by turning screw (Y). Maximum table thickness for mounting – 5.5 cm.
- Adjust the angle* by loosening or tightening screw (Z).
- To avoid jamming when the thrusting cup is facing upwards, increase stroke speed.
Visit lovense.com for a complete user manual.
- Button A: Cycle up through thrust patterns (one tap).
- Button B: Cycle down through thrust patterns (one tap).
- Button C: Increase stroke speed (one tap).
- Button D: Decrease stroke speed (one tap).
Charging port
On/Off (hold for 3 seconds) & start/stop thrusting (one tap).
Lovense Remote
Scan the QR code to watch the product instructions.
Warning
- Only the inner sleeve and the sleeve holder can be washed with water.
- Keep away from extreme heat or cold.
- Make sure your toy is recharged at least once every six months.
- DO NOT use the toy while charging.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>