BLACK+DECKER D3060 Allure Digital Professional Steam Iron User Manual

: June 16, 2024
: BLACK+DECKER

Table of Contents

BLACK+DECKER D3060 Allure Digital Professional Steam Iron
IMPORTANT SAFETY INSTRUCTIONS
SAFETY FEATURES
GETTING TO KNOW YOUR ALLURE™ LCD DIGITAL IRON
HOW TO USE
IRONING TIPS AND TRICKS
CLEANING AND CARE
Warranty Information
FREQUENTLY ASKED QUESTIONS
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BLACK+DECKER D3060 Allure Digital Professional Steam Iron

Thank you for your purchase!

Register online at www.prodprotect.com/blackanddecker

Rate and review your products at www.BlackAndDeckerAppliances.com

Share your pictures & stories with us online

Should you have any questions or concerns with your new product, please call our Customer Service Line at 1-800-465-6070 (US and Canada). Please do not return to the store.

WATER DROPS in this iron show our commitment to high quality. Irons are 100% quality tested

IMPORTANT SAFETY INSTRUCTIONS

When using your iron, basic safety precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING.
Use iron only for intended use.
To protect against the risk of electric shock, do not immerse the iron in water or other liquids.
The iron dial should be turned to a minimum setting before plugging in or unplugging from the outlet. Never yank the cord to disconnect from the outlet; instead, grasp the plug and pull to disconnect.
Do not allow the cord to touch hot surfaces. Let the iron cool completely before putting it away. Loop cord loosely around iron when storing.
Always disconnect the iron from the electric outlet before filling it with water, cleaning, or emptying and when not in use.
Do not operate the iron if it has been dropped, if there are visible signs of damage to the iron or its cord, or if it’s leaking. To avoid the risk of electric shock, do not dissemble the iron; take it to a qualified service person for examination and repair, or call the appropriate toll-free number on the cover of this manual. Incorrect reassembly can cause a risk of electric shock when the iron is used.
Close supervision is necessary for any appliance being used by or near children. Do not leave iron unattended when plugged in or on an ironing board.
Burns can occur from touching hot metal parts, hot water, or steam. Use caution when you turn a steam iron upside down—there might be hot water in the reservoir. Avoid rapid movement of iron to minimize hot water spillage.
This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the appliances by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
The iron must be used and rested on a stable surface.

SPECIAL INSTRUCTIONS

To avoid circuit overload, do not operate another high-wattage appliance on the same circuit.
If an extension cord is absolutely necessary, a 15-ampere cord should be used. Cords rated for less amperage can result in a risk of fire or electrical shock due to overheating. Care should be taken to arrange the cord so that it cannot be pulled or tripped over.

SAVE THESE INSTRUCTIONS.

This product is for household use only.

SAFETY FEATURES

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to modify the plug in any way.

TAMPER-RESISTANT SCREW

Warning: This appliance is equipped with a tamper-resistant screw to prevent removal of the outer cover. To reduce the risk of fire or electrical shock, do not attempt to remove the outer cover. There are no user-serviceable parts inside. Repair should be done only by authorized service personnel.
Note: If the power supply cord is damaged, it should be replaced by qualified personnel or in Latin America by an authorized service center.

GETTING TO KNOW YOUR ALLURE™ LCD DIGITAL IRON

$BLACK+DECKER-D3060-Allure-Digital-Professional-Steam-Iron-fig $1$$

Soleplate
Spray nozzle
Water-fill cover
Steam selector lever
LCD display setting
Burst of steam button
Spray mist button
“Temp” selector button
360˚ pivoting cord
LCD fabric display
Water tank
Heel rest

HOW TO USE

This product is for household use only.

GETTING STARTED

Remove all labels, tags, and stickers attached to the body, cord, or soleplate of the iron.
Remove and save literature.
Please note that water droplets may still be visible in the tank at the time of purchase. This is from the individual quality tests done to ensure that every Allure™ iron meets our high standards for product performance.

FILLING THE WATER TANK

With the iron on a flat surface with the soleplate down, open the water-fill cover.
Pour water into the opening until the water reaches the “MAX” level mark on the side of the water tank. Do not overfill. Close the water-fill cover securely.
Stand the iron on the heel rest.
To refill at any time during the ironing process, unplug the iron and follow the above procedure.

USING YOUR IRON

Plug the iron into an outlet. Iron will beep to signal attached to a power source. LCD screen defaults to an OFF setting.
Read the manufacturer’s fabric labels for material content and clothing care recommendations to help select the correct temperature and steam settings.
To select the temperature on the iron, press the “TEMP” button on the handle. The screen will illuminate. Scroll through the setting options on the LCD display until reaching the desired fabric setting.
The screen will blink “READY” while the iron is heating. Once it has reached the selected temperature, the light will stay on and no longer blink. The iron will beep to signify preheated.
To dry iron (iron without steam), it is not necessary to empty the water tank; simply move the steam selector lever all the way to the left to the Dry Iron setting.
To iron with steam, push the steam selector lever to the desired amount of steam. For optimal results, the steam settings should be used with the following fabric settings.
- No Steam: Silk, Acrylic (1), Nylon (2), Polyester (3)
- Steam Setting: Blends (4)
- Steam Setting: Wool (5)
- Steam Setting: Cotton (6), Linen (7)
When finished ironing, scroll to the OFF setting. Turn the steam selector lever to the Dry Iron position and unplug the iron.
Stand iron on its heel rest and allow it to cool off.

ADDITIONAL FEATURES

Burst of Steam Use for ironing in the vertical and horizontal position. Press this button to generate a burst of steam. For best performance, leave several seconds between bursts.
Spray Mist Press the Spring Mist button to generate a spray of water. Spray Mist is used to dampen tough wrinkles while dry or steam ironing. Do not spray silk.
3-Way Auto Shut Off The iron will automatically shut off after 30 seconds of inactivity if left on its soleplate or side. If left vertically on the heel rest, it will shut off after 8 minutes. When the iron is in Auto Shutoff mode, “AUTO OFF” will blink on the LCD screen. Simply move the iron to cancel shut down.

IRONING TIPS AND TRICKS

The iron can be filled with ordinary tap water; if your water is hard, you may want to use 50 percent distilled water and 50 percent tap water.
If you’re unsure of the fabric’s content, test a small area (on the inside seam or hem) before you proceed to iron the entire garment or cloth.
Whenever ironing a garment with mixed fabrics, select the fabric setting for the most delicate fabric. For example, when ironing a shirt that is 65% cotton and 35% polyester, use the “blends” setting (number 4.)
Whenever temperature settings are changed to a higher or lower temperature, allow the iron to stand for a minute or so to allow heat up or cool down. Test the garment by pressing a small hidden area to make sure the temperature of the iron is correct.

CLEANING AND CARE

This product contains no user-serviceable parts. Refer to service qualified service personnel.

CLEANING OUTSIDE SURFACES

Make sure the iron is unplugged and has completely cooled.
Wipe the soleplate and outer surface with a soft, damp cloth. Water and small amounts of gentle household soaps, such as dishwashing liquid, can be used. Never use heavy-duty cleaners, vinegar, or abrasive scouring pads that may scratch or discolor the iron.
After the iron has been thoroughly dried, turn the iron back on and lightly steam over an old cloth. This will help remove any residue left in the vents.
When finished cleaning, turn the iron off and allow time to cool before storing.

AUTO CLEAN™ SYSTEM

For optimal results over time, it is recommended that you clean your iron about once a month to keep the steam vents free of build-up.

Fill the water tank well below the MAX fill line. Plug in the iron.
Select the Linen Fabric setting (Number 7) on the Temp display and stand the iron on its heel while it preheats.
Once the iron has reached the desired temperature; turn it off and then unplug it from the outlet.
Hold the iron over a sink with the soleplate facing down.
Move the steam lever to the Auto Clean™ setting and hold it in that position. Be careful, as hot water and steam will come out of the vents.
Continue to hold the lever in that position until all of the water has emptied. If necessary, move the iron side-to-side and front-to-back to aid the process.
When finished, release the lever from the Auto Clean™ position and place the iron on its heel rest.
Plug the iron back in and allow it to heat for about 2 minutes to dry out any remaining water.

STORING YOUR IRON

Once the iron is turned off and unplugged from the outlet, allow it to cool.
Check that the steam lever is set to “DRY”.
Wrap the cord loosely around the iron.
Store vertically on its heel to prevent water from leaking from the soleplate.

NEED HELP?

For service, repair, or any questions regarding your appliance, call the appropriate 800 number. Please DO NOT return the product to the place of purchase. Also, please DO NOT mail the product back to the manufacturer, nor bring it to a service center. You may also want to consult the website listed in this pamphlet.

Warranty Information

(Applies only in the United States and Canada)

What does it cover?

Any defect in material or workmanship provided; however, Spectrum Brands’ liability will not exceed the purchase price of the product.

For how long?

Two years from the date of the original purchase with proof of such purchase.

What will we do to help you?

Provide you with a reasonably similar replacement product that is either new or factory refurbished.

How do you get service?

Save your receipt as proof of date of sale.
Visit the online service website at www.prodprotect.com/blackanddecker, or call toll-free 1-800-465-6070, for general warranty service.
If you need parts or accessories, please call 1-800-738-0245.

What does your warranty not cover?

Damage from commercial use
Damage from misuse, abuse, or neglect
Products that have been modified in any way
Products used or serviced outside the country of purchase
Glass parts and other accessory items that are packed with the unit
Shipping and handling costs associated with the replacement of the unit
Consequential or incidental damages (Please note, however, that some states do not allow the exclusion or limitation of consequential or incidental damages, so this limitation may not apply to you.)

How does state law relate to this warranty?

This warranty gives you specific legal rights. You may also have other rights that vary from state to state or province to province.

BLACK+DECKER and the BLACK+DECKER logos and product names are trademarks of The Black & Decker Corporation, used under license. All rights reserved. All other marks are trademarks of Spectrum Brands, Inc. Made in China.