Xming XMM2101 Kiddo Pro Smart Projector User Manual
- June 16, 2024
- Xming
Table of Contents
XMM2101 Kiddo Pro Smart Projector
User Manual
What’ s in the box
When opening the packaging, check the contents of the box against the list
below. If there is anything missing, please contact the seller in due time.
Note:
- The actual contents may vary depending on the country for please refer o the actual product.
- Retain he orignal packaging for future storage or transportation.
Getting Started
Determine the distance between the
projector and the wall or screen according to the desired screen size.
| creen Dimensions (SD) | Relative Distance (D) | Relative Height (H) |
|---|---|---|
| 40″ | 110 | 9. |
| 60″ | 165 | 21 |
| 80″ | 219 | 34. |
| 100″ | 274 | 46 |
| 120″ | 330 | 58 |
Screen Dimensions (SD): The diagonal size of the projection screen (in
inches).
Relative Distance (D): The distance between the projector and the wall or
screen (in cm).
Relative Height (H): The distance from the bottom of the projector to the
bottom edge of the projected image (in cm).
Note:
The dimensions in the table above are for reference only, they are approximate
and may slightly differ from the actual values.
Power up
Connect your power cable to the projector, then plug it in to the wall
outlet.
Power your projector remote by inserting the appropriate batteries. (batteries
not included)
Connect other devices by referencing port label and descriptions on the next
page.
Note:
- Pay attention to the positive and negative poles when installing batteries in the remote control.
- When battery leaks, immediately wipe away any fluid with a dry cloth and replace the batteries with new ones.
- Dispose of used batteries according to local waste disposal rules and regulations of the country or area you live in.
Grab your remote
POWER: Turn Projector on and off
PROFILE SELECTOR: Switch between different Google accounts
SETTINGS: Access the settings
GOOGLE ASSISTANT: Press the Assistant button on your remote to talk to Google
Assistant
NAVIGATION PAD: Move up, down, left, or right, then press the middle button to
confirm
BACK: Retum to previous screen
HOME: Return to home screen
LIVE GUIDE: Launch Play Movies & TV
Volume Button:
+ Increase the volume
– Decrease the volume
Netflix: Access the Netflix App
Youtube: Access the Youtube App
Product Overview
caution:
- Do not place objects within 20cm near the heat dissipation vents.
- Do not place any objects near the vents, as this may cause heat to build up inside the projector.
- Do not look directly into the lens so as to avoid eye damage as this projector emits strong light during use.
Connection Ports
GD Line Out:
Connect an analog cable to an external analog audio system.
-
HDMI:
Highest quality audio/video connection. Connect cable box, Blu-ray player, gaming console, or other devices to your projector using HDMI cables. -
USB:
Connect a USB device to access photos, music and movies. -
DC:
Connect your projector to the power source with the included power cable.
Power Indicator
Press the power button on the body and the power button on the remote control
to turn it on and off.
The power indicator (a soft white light) to the corresponding projector’s
status is as follows:
- During the startup process, the indicator light is always on and then blinks breathingly, and then goes out after entering the main interface of the system.
- After entering the system, the indicator light is always off.
- After entering the shutdown screen, the indicator light is always on. – When the system is in standby, the indicator light is off.
- The breathing light is always on during the shutdown process, and the breathing light is off after the shutdown.
Keystones & Focus
- Move the projector, the screen will be omni-directional automatic correction and auto-focus.
- Open the settings menu, find Display & Sound—Projector, here you can choose Keystone Correction or Focus to realize the function.
Troubleshooting
| Fault | Solution |
|---|---|
| No projected image | Turn off the projector and disconnect from the power, then |
plug in the power cord and turn on the projector.
Android system crashes| Turn off the projector and disconnect from the power,
then plug in the power cord and turn on the projector.
Screen display error| Turn off the projector and disconnect from the power,
then plug in the power cord and turn on the projector.
Remote control is missing or not paired and the projector cannot be turned on
remotely.| Turn off the projector and disconnect from the power. Wait for five
minutes, then plug in the power cord and turn on the projector. After the
projector has been restarted, pair the remote control again.
If the projector overheats, it will automatically turn off.| Please remove any
obstacles from the air inlets and outlets so as to ensure a smooth airflow
through the projector. Follow the instructions above to restart the proiector.
Other Internal System Errors| Please contact a qualified technician to service
the device, or return the
projector to the after-sales department.
**Legal Notice
Hereby, [Formovie (Chongqing) Innovative Technology Co., Ltd.] declares
that the radio equipment type [LCD Smart Projector / XMM2101] is in compliance
with Directive 2014 / 53 / EU and Radio Equipment Regulations 2017. The full
text of the declaration of conformity is available at the following intemet
address: http://Avww.formovie.convglobal/service/support/declaration.html
This device is restricted to indoor use when operating in the 5150 to 5350 MHz
frequency range.
BT maximum transmitter power: 100mW at 2.4GHz – 2.4835GHz
Wi-Fi 2.4G maximum transmitter power: 100mW at 2.4GHz – 2.4835GHz Wi-Fi 5G
maximum transmitter power: 200mW at 5.15GHz – 5.25GHz,100mW at §.25GHz –
§.35GHz & 5.47GHz – 5.725GHz
All products bearing this symbol are waste electrical and electronic equipment
(WEEE as in directive 2012/19/EU) which should not be mixed with unsorted
household waste. Instead, you should protect human health and the environment
by handing over your waste equipment to a designated collection point for the
recycling of waste electrical and electronic equipment, appointed by the
government or local authorities. Correct disposal and recycling will help
prevent potential negative consequences to the environment and human health.
Please contact the installer or local authorities for more information about
the location as well as terms and conditions of such collection points.
Correct disposal of the batteries in this product (Applicable in countries
with separate collection systems) This marking on battery, manual or packaging
indicates that the batteries in this product should not be disposed of with
other household waste at the end of their working life. Where marked, the
chemical symbols Hg, Cd or Pb indicate that the battery contains mercury,
cadmium or lead above the reference levels in EC Directive 2006/66. If
batteries are not properly disposed of, these substances can cause harm to
human health or the environment.
To protect natural resources and to promote material reuse, please separate
batteries from other types of waste and recycle them through your local, free
battery return system.
** This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Note:This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC rules. These
limits are designed to provide feasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.However, there is no guarantee that interference will not occur
in a particular installation.|f this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on,the user is encouraged to try to correct the interference
by one or more of the following
Measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Important: You are cautioned that changes or modifications not expressly
approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
RF Exposure Information: The radiated output power of this device meets the
limits of FCCIIC radio frequency exposure limits. This device should be
operated with a minimum separation distance of 20cm (8 inches) between the
equipment and a person’s body.
Canada regulatory compliance
This device complies with Innovation, Science and Economic Development Canada
license-exempt RSS standard(s). Operation is subject to the following two
conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device. Operation in the band 5150-5250 MHz is only for
indoor use to reduce the potential for harmful interference to co-channel
mobile satellite systems.
Exposure to radio frequency energy
The radiated output power of this device meets the limits of FCC/IC radio
frequency exposure limits. This device should be operated with a minimum
separation distance of 20 cm (8 inches) between the equipment and a person’s
body.
CAN ICES-003 (B)/NMB-003(B)
caution:
- Risk of explosion if the battery is replaced by an incorrect type.
- Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
- Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
- Abattery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
Product Certifications
Manufactured under license from Dolby Laboratories. Dolby, DolbyAudio, and the
double-D symbol are trademarks of Dolby Laboratories Licensing Corporation.
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
The product marking and safety information are located at the bottom of the
product.
Manufacturer:
Formovie (Chongaing) Innovative Technology Co., Ltd.
Address: 4-401, # 2 Longgang Road, Guojiatuo Area, Jiangbei District,
Chongging, China
www.formovie.com