HelloBaby P37RX Digital Wireless Video Baby Monitor User Manual

User Manual
2.4GHz Digital Wireless Video Baby Monitor
2.4GHz Digital Wireless Video Baby Camera

P37RX Digital Wireless Video Baby Monitor

Model: HB2438
The pictures are for reference only, please subject to practicality
www.hellobaby.net.cn
service@hellobaby.net.cn

Thank you for purchasing the HB2438 Baby Monitor. With our baby monitor, you could see and hear your baby sleeping or playing in their room anytime
please retain your original dated sales receipt for your records. For warranty service of your product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.

PLEASE MAKE SURE THE FOLLOWING INCLUDED IN YOUR PACKAGE

Camera unit x l
Power US8 Cable x2
Parent unitx I
User manual x 1
Wall-mounting kit x 1

SAFETY INSTRUCTIOINS

Caution: Keep the device away from children.
Strangulation hazard: Children have STRANGLED in cords.Keep this cord out of the reach of children (more than 3ft(0.9m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
Choking hazard: This product contains small parts, please be careful when unpack and assemble the product.
Read and keep to instructions: All the safety and operating instructions should be read before the video baby monitor is operated. This product cannot replace responsible adult supervision,
Water and moisture: The unit should not be exposed to rain, moisture, dripping or splashing.
No objects filled with liquid should be placed on top of, or beside the product, such as aglass or vase, This item should not be used near water.
Do not: Use the appliance if the cord or plug is damaged. If your baby monitor is not operating properly or has suffered any damage, contact “service@hellobaby.net.cn” service center to request inspection and repair of the appliance in  order to avoid any possible risk.
Do not: Attempt to repair or adjust any of the electrical or mechanical functions of the unit.
Otherwise, the guarantee will be made void.
Ventilation: This baby monitor should not be used on a bed, sofa, rug or similar surface that may block the ventilation openings, or be placed in an enclosed area such as a bookcase or drawer that may impede air flow.
Keep away from sources of heat: This unit should not be exposed to direct heat sources such as acandle, radiator, heat register, stove or other appliance that emits heat, The unit should not be left in direct sunlight.
Power source: This unit should only be used with the AC power adapters included in this package (rated 5v DC 1A)
Damage requiring service: This unit should be serviced by qualified personnel only when

1. Objects have fallen or liquid has been spilled into the product.
2. The units have been exposed to rain.
3. The units do not appear to operate normally or exhibits a distinct change in performance.
4. The units have been dropped or the enclosure damaged.

WARRANTY TERMS

We offer one-year warranty from the original purchase date against defects in workmanship and materials. If you have warranty or support issues, please contact our after-sales service via email.

INSTALLATION GUIDELINES

• To use your parent unit and camera unit together, you have to establish a radio link between them, and the range will be affected by environmental conditions.
• Any large metal object, like a refrigerator, a mirror, a filling cabinet, metallic doors or reinforced concrete between the baby and parent unit may block the radio signal,
• The signal strength may also be reduced by other solid structures, like walls, or by radio or electrical equipment, such as TV, computers, cordless or mobile phones, fluorescent lights or dimmer switches.
• Use of other 2.4GHz product, such as wireless networks (Wi-Fi routers), Bluetooth
• Systems, or microwave ovens, may cause interference with this product, so keep the baby monitor away at least 5ft(1.5m) from such products, or turn them off if they cause interferences.

PLACEMENT OF THE BABY MONITOR

The camera can be placed on the desktop or mounted on the wall. Don’t place baby monitor on soft quilts or blankets or in the corners of cupboards, shelves, etc; Keep the baby monitor away from heat sources such as radiators, chimneys, cookers and direct sunlight; Keep the baby unit away from TV sets, microwave oven and radios. If interference occurs, move the camera to elsewhere.
Place the camera within 6 feet (2 meters) of the area being monitored for optimum performance.

GETTING STARTED

5.1 TURN ON THE BABY UNIT:

1. Insert the DC plug of the power adapter into the DC jack in the rear of the Baby Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. Once the adapter is connected, the power LED will light up.
4. keep the baby unit plugging in.

5.2 TURN ON THE PARENT UNIT:

1. Insert the DC plug of the power adapter into the DC jack in the side of the parent Unit.
2. Insert the other end of the power adapter into a suitable electrical outlet.
3. Press and hold the power key 3seconds on the side of the parent unit.
4. Once parent unit is on, the power LED will light up and the image will display on the LCD.

Note: When the product is in use, the antenna needs to be pulled up, so that the signal is the best.

5. 3 INFRARED NIGHT VISION (AUTOMATIC)
The infrared night vision function allows the camera to pick up images in dark or low light conditions. In this mode, only black and white images will be displayed on the monitor, the optimum image lie in where baby unit is 6ft (2m) away from object. The camera is in night vision mode, the icon willbe displayed on the top of screen.

PRODUCT OVERVIEW

6.1 BABY UNIT OVERVIEW:

6.2 PARENT UNIT OVERVIEW:

6.3 ICONS OVERVIEW

—– Signal Strength
—–Feeding Timer
········Camera
——-High sensitivity level
········Volume
—–Brightness
—–Nightvision
—–Middle sensitivity level
—–Zoom
—–Battery level
—–Low sensivity level

KEY OPERATION

7.1 POWER SAVE/SCREEN OFF
Short press the power key to turn on/ off the screen.
7.2 VOLUME ADJUSTMENT
Press the key to increase the volume; Press the key todecrease the volume.
7.3 BRIGHTNESS ADJUSTMENT
Press the key to decrease the brightness; Press the key toincrease the brightness.
7.4 CAMERA VIEW/SCAN
Press Scan key to view/scan camera; During scan mode, the scan icon will be displayed on the top of screen. And each camera’s video will stay on the LCD around 10 seconds and then turn to next camera alternately.
7.5 DIGITAL ZOOM & PAN / TILT
Press and hold the key around 2 seconds to operate Zoom in / out. At the Zoom mode, press the key to Pan left; press eyto Pan right; press key to tilt up; press.y key to tilt down;During digital zoom mode, the zoom icon will be displayed on the top of screen, Warm reminder: If you want to adjust the volume/Brightness, you have to exit the Zoom mode before you operate it.

MENU OPERATION

8.1 PAIRING THE CAMERA AND PARENT UNITS
The baby unit is pre-registered to your parent unit. You do not need to register it again unless the baby unit loses connection with the parent unit. To re-register your baby unit, or register a new baby unit, follow the steps below:

Note: Camera icon with” ” means itis well registered. You should select and pair with the camera icon without” ” sign.

8.1.1ADD CAMERA

1. Press the MENU key then the menu will pop up.
2. Press the / / / key until the camera icon is selected.
3. Press0K key to enter into sub-menu, then press / key to select your desired camera.
4. Press key enter into sub-menu; Press / key to select[ then press 3 key.

TECHNICAL DATA

Output: SV DC 1A
Camera Unit: Input: 100-240VAC 50/60Hz
Output: 5V DC lA
Operating Range| Up to 1000ft outdoor line of sight Up to 165ft indoor
Display| 3.2″ IPS TFT LCD
Rechargeable Battery for Monitor| 3.7V,950mAh,3.515Wh
Battery Life| Up to 6 hours
Camera Unit and Parent Unit RF Power ( for CE)| less than 20dBm
Operation Rnvironment| Operation Temperature: +32F-+104F (0°C-40°C) Battery Charging Temperature: +50E-+104F (10°C-40°C)
Relative Humidity : 15%-85%

TROUBLE SHOOTING

No Reception on The
Monitor| * The power adapters may not be properly connected.

• Confirm that the camera and monitor are ON.
• Camera may be far away from the monitor.
• Camera and monitor may not be properly paired; follow PAIRING instructions.
  ---|---
  Interference or Poor
  Reception| * Move the monitor close to the camera.
• The camera or monitor may be placed too close to many metal objects.
• Other electronic devices may be interfering with the signal.
• The battery power may be too low.
  Audio Feedback
  (High Pitched Noise)| * The camera and monitor may be placed too closed.
• The volume on the monitor may be set too high.
  Frozen Picture on
  Screen| * Repower the baby unit (plug out the adapter, then plug it into the
  socket again).
• Press the RESET key at the back of parent unit.

MAINTENANCE

• Clean your baby monitor with a slightly damp or anti-static cloth,
• Never use cleaning agents or solvents.

DISPOSAL GUIDE FOR BATTERY AND PRODUCT

• Do not attempt to repair or adjust any of the electrical or mechanical functions of the unit.
• Remember to dispose of the product in an environmentally responsible way.
• For proper collection and processing of these products, take them to the collection points designated by local authorities. You can also contact the store where you purchased the product.

Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause personal injury or damage to property. Use only the types of the batteries which are indicated in this manual.
CAUTION: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45 degree C or Incinerate.
Follow Manufacturer’s Instructions.

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery,
• Leaving abattery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas.
• Abattery subjected to extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.
• The battery shall not be exposed to excessive heat such as sunshine, fire or the like.

FCC & ISDE Statement

This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions: (1)this device may not cause harmful interference, and (2)this device must  accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a  residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is  encouraged totry tocorrect the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver
• Consult the dealer or an experienced radio/TV technician for help.
• Connect the equipment into an outlet on a circuit different from that to which the receiver

This device meets the exemption from the routine evaluation limits in section 2.5 0f RS$ 102 exposure and compliance.
and compliance with RS$ 102 RF exposure, users can obtain Canadian information on RF

SAR Statement for Monitor
Specific Absorption Rate (SAR) information:
This Monitor meets the government’s requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific  studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. ISED&FCC RF Exposure Information and Statement the SAR limit of Canada(ISED&FCC)is 1,6 W/kg  averaged over one gram of tissue. Device types: Monitor has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the Monitor kept 0mm from the body. To maintain compliance  with ISED RF exposure requirements, use accessories that maintain an 0mm separation distance between the user’s body and the back of the Monitor,The use of belt clips, holsters and similar accessories should not contain metallic  components in its assembly. The use of accessories that do not satisfy these requirements may not comply with IS£ED RF exposure requirements, and should be avoided.

EU Declaration of Conformity (DOC)
Hereby, videotimes declares that the radio equipment type is in compliance with RED www.hellobaby.net.cn
Directive 2014/53/EU.
The full text of the EU declaration of conformity is available on the website:
Model: HB2438
Responsible Party(US): Startline LLC
Add: 22 Hazelwood Drive, Jericho, NY11753
Tel: 1-516-681-3729
Authorized UK Representative(UK): APEX CE SPECIALISTS LIMITED
Add: 89 Princess Street,M14HT, UK
info@apex-ce.com
Shenzhen Videotimes Technology Co.,Ltd
Room 2106, Building 11, Tianan Yungu Phase I, Gangtou Community, Bantian Street,
Longgang District, Shenzhen, Guangdong, China

WARNING

Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9 m) away). Do not remove this tag.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>