Mandis RC 2040 Remote Control Instructions
- June 16, 2024
- Mandis
Table of Contents
Mandis RC 2040 Remote Control
Product Information
Specifications
- Model: Mute Power
- Version: Original
- Power Supply: PP I-II
- Buttons: 1 2 3 4 5 6 7 8 9 0 -P
Frequently Asked Questions
- Q: How do I know if the device is powered on?
- A: When the device is powered on, you will see a display on the screen indicating that it is active and ready for use.
- Q: Can I adjust the volume while the sound is muted?
- A: No, the volume adjustment buttons will not work while the sound is muted. You need to unmute the device before adjusting the volume.
- Q: What happens if I switch the power supply while the device is turned on?
- A: It is recommended to switch the power supply only when the device is turned off. Switching the power supply while the device is turned on may cause damage to the device or disrupt its functionality.
Product Usage Instructions
Powering On/Off
- To power on the Mute Power, press and hold the Power button (P) for a few seconds until the device turns on.
- To power off, press and hold the Power button again until the device turns off.
Adjusting Volume
- To adjust the volume, use the buttons numbered 1 to 9.
- Pressing the lower-numbered buttons will decrease the volume, while pressing the higher-numbered buttons will increase the volume.
- The volume level will be displayed on the device’s screen.
Muting Sound
- To mute the sound, press the Mute button. This will temporarily disable the audio output.
- Press the Mute button again to unmute and restore the sound.
Changing Power Supply
- To change the power supply, switch the PP I-II button to either position I or II, depending on your power source.
- Ensure that the device is powered off before making any changes to the power supply.
Product Overview
Remote Using Instructions
Original / Rechange
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>