Jabra USB-C MS Evolve2 Buds User Guide
- June 16, 2024
- Jabra
Table of Contents
Jabra Evolve2 Buds – USB-C MS
20/05/2023 00:20
How do I pair my Jabra Evolve2 Buds with my mobile device?
To pair your Jabra Evolve2 Buds with your mobile device or tablet, follow these steps.
-
Turn on the Bluetooth setting on your mobile device.
-
Turn on your earbuds by removing them from the charging case.
Alternatively, simultaneously press and hold the Left and Right buttons. The LEDs on both earbuds will turn green. -
To enter pairing mode, simultaneously press and hold (3 seconds) the Left and Right buttons on the earbuds, until the LEDs on the earbuds flash blue. The earbuds are now ready to pair with your mobile device.
-
To pair, go to the Bluetooth menu on your mobile device and select the Jabra Evolve2 Buds from the list. Enter “0000” (four zeros) if you are asked for a PIN.
Note
If you want to use just one earbud, you must still pair both earbuds with your
mobile device. After the pairing, you can place one of the earbuds in the
charging case.
In daily use, when you turn on the earbuds, they will automatically reconnect
with the last previously paired device, if it is turned on and within range.
If pairing is not successful, try the pairing steps again, or try pairing with a different Bluetooth device. For troubleshooting tips, see here. Optionally, try using the Bluetooth Pairing Guide which provides detailed steps for pairing with your mobile device.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>