FAGERHULT 73110-528 Pleiad G4 Robust Wide Beam Instructions

FAGERHULT 73110-528 Pleiad G4 Robust Wide Beam

Product Information

Specifications

• Abrt.no.: 73110-528

• EAN: 7320047832765

• Product Name: Pleiad G4 Robust

• Light Distribution: Wide Beam

• Control: DALI/Phase-pulse

• Connector: Wieland GST18i5 5-way male

• Color: White/alu

• Reflector: Matt

• Lumen   Output: 1120

• CLO Time: 100000 hours

• CCT: 4000K

• SDCM: 3

• Lumen Maintenance L100 B50: 100000 hours

• Energy Class (LED module): E

• CLO Function Active: Yes

• Lm/W: 126

• CRI: 80

• Lumen Maintenance (100000 hours L100): LED driver – 100000
  hours, Max failure – 10%

• Light Control: DALI/Phase-pulse

• Power On Last Level: Yes

• Switch Control, Max Number: 25

• Driver Brand: Tridonic

• Corridor Function: Yes

• Protection Class: IK10

• Mains Frequency: 0, 50, 60 Hz

• IP Rating: 64

• Rated Supply Voltage: 220-240V

• Surge Protection CM: 2 kV/kA

• Power Factor (100%): 0.97

• Surge Protection DM: 1 kV/kA

• Dimensions: Height – 114mm, Weight – 1.3kg, Diameter – 230mm

Product Usage Instructions

Installation

• The Pleiad G4 Robust can be installed in both ventilated and unventilated suspended ceilings. It is recommended to use the supplied installation clip and separate driver for easy and tool-free installation.
• If mounting on soft tile ceilings, an assembly plate must be used (see accessories for more details).

Design

• The luminaire body is made of cast aluminum with a two-part visible edge ring in aluminum.
• The light openings between the rings are covered with durable PETG plates.
• The luminaire and the edge rings are locked using tamper-proof torx screws.

Reflector

The reflector is made of metalized aluminum, and the lens is made of clear acrylic.

FAQ

Q: Can the Pleiad G4 Robust be used in outdoor environments?

• A: No, the Pleiad G4 Robust is designed for indoor use only.

Q: Can I customize the Pleiad G4 Robust with different color temperatures and optics?

• A: Yes, you can use Fagerhult Configure to adapt and optimize your version of Pleiad G4 Robust by selecting CRI, color temperatures, optics, luminous flux, accessories, etc.

Q: What is the warranty period for the Pleiad G4 Robust?

• A: Please refer to the warranty information provided by the manufacturer for details on the warranty period.

DIMENSIONS

Usage Instructions

• Downlight with protection class IK 10 for increased security. The reflector ring is fastened with a safety screw to prevent access and dismantling.
• Installation Recessed mounting in unventilated or ventilated suspended ceilings.
• Separate driver and installation clip for easy and tool-free installation supplied as standard. An assembly plate must be used when mounting on soft tile ceilings, see accessories. For detailed information, see the installation instructions. Connection Connection in separate driver box. Snap-in terminal block 3×1.5 mmm? (x2), onward connection possible. 5×1.5 mm’ (x2) when dimming. Can also be supplied with chassis chassis-mounted snap-in connector in the ballast where a T-splitter or mains cable and plug are possible. The luminaire body and driver are interconnected with a snap-in connector.
• Design Luminaire body in cast aluminum. Two-part visible edge ring in aluminum.
• The luminaire has durable PETG plates in the light openings between the rings. The luminaire and the edge rings are locked using tamper-proof torx screws.
• Reflector of metalized aluminum. The lens of clear acrylic.
• Miscellaneous IK 10. IP 64 is under a suspended ceiling, and IP 20 is above a suspended ceiling. Luminaire body Class III. The supplied driver must be connected to the protective earth.
• Luminaires with Tunable White (2700 – 6500 K) are equipped with driver DALI Device type 8. For loads in the suspended ceiling system, follow the selected suspended ceiling supplier’s recommendation.
• CLO (Constant Light Output) maintains the correct light from the luminaire for the duration of its rated life.
• The articles listed below are examples.
• Use Fagerhult Configure to adapt and optimize your version of Pleiad G4
• Robust by selecting CRI, color temperatures, optics, luminous flux, accessories, etc.

Pleiad G4 Robust

W ide Beam, DALI/Ph ase-pu lse, Wielan d G ST18i5 5-w ay male, Matt

DESIGN

• Light distribution Wide Beam Reflector Matt
• Colour White/alu

LIGHT DATA & PERFORMANCE

• Lumen output 1120
• CLO function active Yes
• CLO time, h 100000
• lm/W 126
• CCT, K 4000 CRI 80
• SDCM 3 Lumen maintenance 100 000 h L100
• Lumen maintenance L100 B50, h 100000
• LED driver, h/max failure % 100000/10
• Energy class, LED module E

CONTROLS & CONNECTIVITY

• Light control DALI/Ph ase-pu lse Driver brand Tridon ic
• Power on the last level Yes Corridor function Yes
• Switch control, max no. 25 AM Yes

ELECTRICITY & ENCLOSURE

• Connection Wielan d GST18i5 5-w ay male
• Rated supply voltage, V 220-240
• Mains frequency, Hz 0, 50, 60 Protective class 1
• IP rating 64
• IP rating (above suspended ceilings) 20
• IK rating 10 Star t W 9
• End W 10 Average W 9.5
• Stand by W 0.2 Min. ambient temperature, °C -25
• Max. ambient temperature, °C 25 MCB B10A , pcs 24
• MCB B16A 38 MCB C10A 40
• MCB C16A 64 THD, % 12
• Surge protection CM, kV/kA 2
• Surge protection DM, kV/kA 1
• Power factor, 100 % 0.97

DIMENSIONS

• Height, mm 114
• Diameter, mm 230
• Weight, kg 1.3
• Prin ted fromfagerhult.com 2023-06-08

References

• art.no
• 73110-528 Pleiad G4 Robust - Fagerhult (International)
• Pleiad G4 Robust - Fagerhult (International)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>