CROUZET SSR Din Rail Mini Mount Instruction Manual

CROUZET SSR Din Rail Mini Mount

Specifications

• Product Name: SSR – DIN-RAIL MOUNT MINI
• Part Number: GNR Mini, GNRD Mini
• Output Current: 4A
• Control Voltage: D2 (6-30 Vc) for GNR Mini, D1 (5-30 Vc) for GNRD Mini
• Output Voltage: A (12-275 Vc), B (12-460 Va) for GNR Mini, C (2-60-240 Vz), A1 (90-240 Vz DC Switching) for GNRD Mini
• Mounting: DIN Rail

Product Usage Instructions

Mounting Instructions

Mounting on DIN Rail

1. Locate the DIN rail and align it with the top part of the DIN clip in the back of the SSR.
2. Using reasonable force, push the SSR in the direction of the arrows.

Dismounting

1. To remove the SSR, place a screwdriver on the clip and push it in the direction shown.
2. Make sure to use the appropriate tool to avoid damaging the latching system.

Connection

Output Wiring

Number of Wires:

• Direct connection with wires without ferrules: 1 wire
• Direct connection with wires with ferrules: 2 wires

Input Wiring

Number of Wires:

• Direct connection with wires without ferrules: 1 wire
• Direct connection with wires with ferrules: 2 wires

Recommended Tightening Torque: M5 Screw NM Min 0.4 / Max
0.5

Screwdriver Type: POZIDRIV 2

Important Considerations

Electrical equipment should be installed, operated, serviced, and maintained only by qualified personnel. No responsibility is assumed by Crouzet for any consequences arising out of the use of this manual. Be sure to use input and output voltage within operating ranges.

WARNING: The product’s side panels may be hot, allow the product to cool before touching. Please follow mountinginstructions. Failure to follow these instructions can result in serious injury or equipment damage.

FAQ

Q: Where can I find the data sheet for this product?

A: The data sheet is available on www.crouzet.com

Q: How do I remove the SSR from the DIN rail?

A: To remove the SSR, place a screwdriver on the clip and push it in the direction shown. Make sure to use the appropriate tool to avoid damaging the latching system.

Q: What should I do if there is no space between two SSRs?

A: In the event there is no space between two SSRs, reduce the load current. Forced cooling, such as using a fan inside the cabinet, significantly improves the thermal performance.

Q: How many wires are required for output and input wiring?

A: For output wiring, you can have 1 wire for direct connection without ferrules or 2 wires for direct connection with ferrules. The same applies to input wiring.

Q: What is the recommended tightening torque for the M5 screw?

A: The recommended tightening torque for the M5 screw is NM Min 0.4 / Max 0.5.

Q: Can I use this product with heat-sensitive materials?

A: The user should protect heat-sensitive materials as well as people against any contact with the product. For correct cooling, the SSR needs air convection. Less air convection produces abnormal heating. If there is no space between two SSRs, reduce the load current.

Q:How should I handle transient voltage?

A: For information on handling transient voltage, please visit www.crouzet.com.

CROUZET SOLID STATE RELAYS – DIN RAIL MOUNT PRODUCTS have been developed to offer all the advantages of electronic switching technology. The 12 mm industrial housing is quick to install. The product is compact and reliable. Please refer to the data sheet available on www.crouzet.com

MOUNTING INSTRUCTIONS

1. Locate rail and align with the top part of the DIN clip in the back of the SSR
2. Using reasonable force, push the SSR in the direction of the arrows
3. To remove, place the screwdriver on the clip and push in the direction shown ! WARNING: Removing product from RAIL DIN incorrectly by not using the appropriate tool will damage the latching system

PART NUMBER NOMENCLATURE

WIRING DIAGRAMS

GNR Mini

1. Protection Equipment: Short circuit protection

GNRD Mini

GNRDM4D1C & GNRDM4A1C:
it is recommended to add an overvoltage protection

WARNING: The user should protect heat sensitive materials as well as people against any contact with the product.
For correct cooling, the SSR needs air convection. Less air convection produces an abnormal heating. In the event there is no space between two SSRs, reduce the load current. Forced cooling (ex. fan inside the cabinet) significantly improves the thermal performance.

CONNECTION

OUTPUT WIRING

NUMBER OF WIRES – Direct connection with wires with or without ferrules

INPUT WIRING

DERA TING CURVES

GNR Mini – 4 A

GNRD Mini – 4 A

IMPORTANT CONSIDERATIONS

Electrical equipment should be installed, operated, serviced and maintained only by qualified personnel. No responsibility is assumed by Crouzet for any consequences arising out of use of this manual. Be sure to use input and output voltage within operating ranges.

WARNING: The product’s side panels may be hot, allow the product to cool before touching. Please follow mounting instructions. Failure to follow these instructions can result in serious injury or equipment damage.

TRANSIENT VOLTAGE

In AC power lines, transient voltages are common and may pose a risk for the operation, load and reliability of the SSR. In Crouzet SSR, the transient protection can rise 800 V (please refer to product datasheet).
User may also use external transient protection to the SSR for additional protection (please refer to product datasheet).

WARNING

RISK OF MATERIAL DAMAGE AND HOT ENCLOSURE

• Confirm that the product power supply voltage and its tolerances are compatible with those of the electrical network.
• The product’s side panels may be hot, allow the product to cool before touching.
• Follow proper mounting instructions including torque values.
• Do not allow liquids or foreign objects to enter this product.

DANGER

HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
Turn off power supply before working on this equipment. Failure to follow these instructions can result in death, serious injury or equipment damage.

For more information please go to www.crouzet.com

References

• Crouzet Mechatronic components for demanding industries
• Crouzet Mechatronische Komponenten für anspruchsvolle Industriezweige
• Des composants mécatroniques pour une industrie exigeante

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>