FUIMLY AM003703_US2 Treadmill User Manual

FUIMLY AM003703_US2 Treadmill

Product Information

• Specifications:
  • Model: AM003703_US2
  • Contact Email: [email protected].

Product Usage Instructions

• IMPORTANT PRECAUTIONS
  • WARNING:
  • The security key has a magnet which must be put in the display.
  • At the end of the lace, there is a clamp that should be attached to the clothes. The treadmill will start working only if the key is placed in the display. This is essential.
  • You must preserve the original packaging with its protections, purchase receipt, manual, and components during the guarantee period.
  • To decrease the risk of suffering severe injuries, read carefully all the important instructions and warnings regarding the use of a treadmill before using it.
  • Our company doesn’t take any responsibility for personal injuries or property damages resulting from the use of this product.
  • Before starting any workout program, consult your doctor. It’s especially important for people older than 35 years old, people with health problems, and pregnant women.
  • The owner must ensure that all users are correctly informed about the warnings.
  • Use the equipment as explained in the instructions manual.
  • Keep the equipment in an enclosed area, away from dust or humidity. Don’t store it in a garage, indoor backyard, or near water. Humidity, dust, and water could lead to a malfunction of the equipment, annulling its guarantee.
  • Some models include levelers or leveling threads behind the legs, helping with leveling. Please read the manual to verify if your unit is provided with one of them.
  • The unit must be placed in a ventilated area. Don’t use it in places with sprays or with an oxygen dispenser. The air you breathe may be affected and cause an accident.
  • Keep children younger than 12 years old and pets away from the equipment. Maintain a security distance.
  • Check the manual for the maximum weight your equipment can support. Excessive weight could lead to a malfunction in the operating system, which won’t be covered by the guarantee.
  • Wear suitable clothes and shoes. Do not use loose clothing that may get hooked.
  • If your equipment is working through a power supply, make sure that the power cord and plug are in good conditions.
  • Carry out the connection only when the circuit has a ground connection; otherwise, it could cause damage to the equipment or property, which the guarantee won’t cover. Power cords must be away from hot surfaces.
  • If it is a battery-powered unit, check and make sure that they are charged enough so the display will fully function.
  • If your equipment is provided with a security key, please understand the product before using it. The security key has a magnet which must be put in the display.
  • At the end of the lace, there is a clamp that should be attached to the clothes.
  • The treadmill will start working only if the key is placed in the display. THIS IS ESSENTIAL.
• MAIN TECHNICAL FEATURES

  •   * [Technical features description]

  • ASSEMBLY
  • [Assembly instructions]
  • TREADMILL OPERATION
  • [Treadmill operation instructions]
  • MAINTENANCE
  • [Maintenance instructions]
  • COMMON ERRORS
  • [Common errors troubleshooting guide]
  • THE OBVIOUS DANGER LIST
  • [List of obvious dangers to be aware of]
  • WARRANTY
  • [Warranty information]
  • NOTE
  • [Additional notes or important information]
  • WORKOUT GUIDELINES
  • [Guidelines for effective workouts]
• FAQ (Frequently Asked Questions)
  • Q: How do I attach the security key?
  • A: The security key has a magnet that should be placed in the display. At the end of the lace, there is a clamp which should be attached to your clothes. The treadmill will only start working if the key is securely placed in the display.
  • Q: Can I store the treadmill in a garage or near water?
  • A: No, it is recommended to keep the equipment in an enclosed area, away from dust or humidity. Storing it in a garage, indoor backyard, or near water can lead to malfunctions and void the guarantee.

IMPORTANT PRECAUTIONS

WARNING

The security key has a magnet which must be put in the display. At the end of the lace, there is a clamp that should be attached to the clothes.The treadmill will start working only if the key is placed in the display.This is essential. A correct lubrication of the treadmill with silicon oil or Teflon is really important. This lubrication must be performed regularly depending on each person, even before its first use. You must preserve the original packaging with its protections, purchase receipt, manual, and components during the guarantee period.

To decrease the risk of suffering severe injuries, read carefully all the important instructions and warnings regarding the use of a treadmill before using it. Our company doesn’t take any responsibility for personal injuries or property damages resulting from the use of this product.

1. Before starting any workout program, consult your doctor. It’s especially important for people older than 35 years old, people with health problems and pregnant women.
2. The owner must ensure that all users are correctly informed about the warnings.
3. Use the equipment as explained in the instructions manual.
4. Keep the equipment in an enclosed area, away from dust or humidity. Don’t store it in a garage, indoor backyard or near the water. Humidity, dust and water could lead to a mal- function of the equipment, anulling its guarantee.
5. Place the unit on a flat surface. If the surface is uneven, the proper functioning could be affected. Some models include levellers or levelling threads behind the legs, helping the levelling. Please read the manual to verify if your unit is provided with one of them..
6. The unit must be placed in a ventilated area. Don’t use it in places with sprays or with oxygen dispenser. The air you breath may be affected and cause an accident.
7. Keep children younger than 12 years old and pets away from the equipment. Keep the security distance.
8. Check in the manual the maximum weight your equipment can support. An excessive weight could lead to a malfunction in the operating system, which won’t be covered by the guarantee.
9. Wear suitable clothes and shoes. Do not use loose clothe that may get hooked.
10. If your equipment is working through a power supply: make sure that the power cord and plug are in good conditions. Carry out the connection only when the circuit has ground connection, otherwise it could cause damages on the equipment or in the prop- erty which the guarantee won’t cover. Power cords must be away from hot surfaces.
11. If it is a battery-powered unit: check and make sure that they are charged enough so the display will fully function.
12. If your equipment is provided with a security key, please understand the produce before using it. The security key has a magnet which must be put in the display. At the end of the lace there is a clamp which should be attached to the clothes.The treadmill will start working only if the key is placed in the display.THIS IS ESSENTIAL.
13. If your unit works thanks to a power supply: don’t put it into operation while you are on the belt. The motor would be innecesarily loaded. The right way is placing yourself with open legs, each one on a side of the belt and sit up once it is ongoing.
14. If your unit works with an electric supply: check the speed it can reach, for your security.
15. The best is to adjust gradually the speed to avoid sudden changes.
16. If your unit works through an electric supply: never leave the machine unattended while it’s working. Take the security key off, turn the “on” button into “off” and unplug the power cord.
17. If your equipment is provided with a pulse sensor, you may know it isn’t a medical instru- ment. It’s designed as a help for the workout and determines the tendencies of heart rates. Some factors could affect the accuracy of the heart rate interpre- tations, for example, the movements of the user.
18. The machines don’t take up too much space as they can be folded. Once folded, make sure that all is well assembled to the locking system, either if it has a lock or a hydraulic engine. Don’t try to move it or raise it unless you are insured.
19. Should any damage happen being the machine uninsured, it won’t be covered by the guarantee.
20. Check and tighten all screws regularly, because due to vibrations screws and nuts tend to loosen. Damages caused by a lack of maintenance won’t be covered by the guarantee.
21. Correct lubrication of the treadmill with silicon oil or Teflon is IMPORTANT.
22. This lubrication must be performed regularly depending on each person, even before its first use. The lubrication must be carried out this way: disconnect the equipment of the electricity supply (in case you have one), pull up the tapestry from the side with one hand, and spread the oil on the board. Please repeat this procedure from the other later- al side. Connect the equipment to the power supply (in case you have one) and turn the “on” button (red button) into the correct position (I), insert the security key, and let the treadmill work for several minutes without any weight on it. Repeat this action on a reg- ular basis.
23. Two people will be needed to take the unit from the package. Otherwise, the damages caused at this moment won’t be covered by the guarantee.
24. Don’t let any object fall into the grooves.
25. If the unit works through a power cord: unplug always the power cord before cleaning it, after the workout, and before performing any maintenance duty.
26. This unit is designed for a domestic purpose and in an interior place, not for a business environment or outside.
27. Do a workout with stretches before and after the sessions, you will avoid injuries. Drink water before, during and after the workout.
28. If you start feeling pain or dizziness while training: STOP IMMEDIATELY.
29. YOU MUST PRESERVE THE ORIGINAL PACKAGING WITH ITS PROTECTIONS, MANUAL, AND COMPONENTS DURING THE GUARANTEE PERIOD.
30. The accessories can be different to the other models. This electronic product can’t be thrown under any circumstances into the municipal rub- bish bins. To preserve the environment, this product must be recycled according to the applicable law of your country. Please contact your town council to learn more about this procedure. Should you need technical assistance or advise with the installation of pieces, You can get in touch with us.
31. A clear safety area of at least 2000mm in length and at least as wide as the treadmill shall be provided behind the equipment when in use.

VICE KEEP THESE AD PUES TO FUTURE ENGE TO HAVE ACCESS TO THIS SER-

MAIN TECHNICAL FEATURES

speaker,Bluetooth App
Speed Range| Speed Range 0.6-9MPH

ASSEMBLY

NOTICE: ASSEMBLY REQUIRES TWO PERSONS

INSTALLATION

• STEP 1
  • Carry out the machine from the package by two persons and place it lightly on flat floor, and put other fittings beside the machine.
  • Lift up the stand tube and electronic watch according to the picture (make sure not to press the signal wire).
  • One person hold the electronic watch steady and the other person puts 4PCS M8*20 and 2PCS M8X45 screw with 2PCS M8 nuts and fix them onto the stand tube with FLAT WASHERS.
• STEP 2
  • Use 2PCS M8*20 screws and FLAT WASHERS to screw up the left and right stand tube with the electronic watch.
• STEP 3
  • Use 2PCS ST4X15 screws to fasten the plastic cover at bottom of stand tube.

TREADMILL OPERATION

HOW TO EXPAND AND MOVE THE TREADMILL

COMPUTER

Manual

Mode

Fan

Program

Bluetooth speaker

Bluetooth speaker to play music

Bluetooth APP– SCAN RQ code on panel sticker or search SPAX- /ZWIFT at the APP store or Google Play to download APP

Constitution test

05

| FAT| 19| Underweight
FAT| =(20—25)| Normal weight
FAT| =(25—29)| Overweight
FAT| 30| Obesity

MAINTENANCE

This product must be earthed. If the power cord is damaged, it must be replaced with a manufacturer-recommended power cord.

DO NOT TANGLE THE POWER CORD!

REGULAR MAINTENANCE OF THE TREADMILL

• STORAGE: Keep your equipment in an enclosed place, away from dust or humidity. Don’t store it either in a garage or in an indoor backyard, or near the water. Humidity, dust, and water could damage it and affect its functioning.
• ELECTRIC CABLE: Make sure that the cable and plug are in perfect condition. Electric cables must be away from hot surfaces.
• SCREWS AND CONNECTING CABLES: Supervise and tighten the screws regularly, because due to the vibration the screws and nuts tend to loosen.
• LUBRICATION: It’s correct lubrication of the treadmill with silicon oil or Teflon is important. This lubrication must be performed regularly depending on its use even before the first use. There is a hole for adding oil on the motor cover. After starting the machine, please change to the highest speed, then add the oil into the hole, the oil will be spread from the middle between the running belt and board.

ALIGN AND TIGHTEN THE BELT OF THE TREADMILL

ALIGN THE BELT: Due to its use, the belt can move off-center. If the belt has moved to the left, start the treadmill and increase the speed to 3MPH. Use the 6mm Wrench to turn the fixed left bolt clockwise or turn the fixed right bolt counterclockwise. Don’t tighten the belt too much to be able to walk. Repeat this procedure until the belt is properly aligned.

• CLEANING: Don’t use abrasive products. A damp cloth is enough.
• LEVELING: If your unit is provided with leveling wheels, please adjust them to oavoid vibrations and therefore malfunctions.
• KEEP THIS MAINTENANCE ADVICE FOR FUTURE REFERENCES

COMMON ERRORS

NO DISPLAY

| A) electricity not connected| Connect the electricity
B) power switch not turn on| Turn on power switch
C) pcb no power or broken| Press over-load protector or change new pcb
D) signal wire not connected| Re-connect signal wire or change new one
E) computer broken| Change new computer
F) background light broken| Check background light wire or change new one
NOT DISPLAY ALL INFORMATION| A) display drive IC not inserted well| Re-insert IC,and re-weld it or change new one
B) EMI gasket slip, not well fastened| Re-assemble screen

NOT RUN SMOOTHLY

| A) driving position has resistance| Adjust driving position, or add some silicon oil
B) running belt too tight or too loose| Adjust the belt tension
C) pcb torque too big or too small| A just torque to right position
 | —OR—-

(OR E00/E07)

| A) safety key off| Put on safety key
B) magnetron not fixed well| Fix magnetron to right position

E01/E13

| A) signal wire not well connected| Re-connect signal wire
B) signal wire broken| Change new signal wire
C) signal wire broken| Change new computer
D) pcb broken| Change new pcb

E02

| A) motor wire not well connected, or open| Re-connect motor wire or change new motor
B) IGBT on pcb broken| Change new pcb
C) input voltage too low| Stop using, ask electrician to check
E03| A) speed signal wire not well connected, or| Re-connect speed signal wire or change new sensor
B) pcb broken| Change new pcb

E04

| A) incline motor wire not well connected| Re-connect incline motor wire
B) incline motor broken| Change new incline motor
C) pcb broken| Change new pcb

E0S

| A) over-loaded| Turn off and re-start machine
B) driving position hinder| Adjust driving position, or add oil
C) motor short circuit| Change new motor
D) pcb burnt| Change new pcb

E06

| A) motor wire not well connected| Re-connect motor wire
B) motor open circuit| Change new motor
C) motor idling| Re-assemble to test
E08| A) storage IC not well inserted| Re-insert IC, pay attention to pins
B) storage IC broken, or pcb broken| Change new IC, or change new pcb
E09| A) machine stand or not put evenly on| Put evenly on floor
B) pcb broken| Change new pcb

ElO

| A) pcb torque too big| Adjust torque to right position
B) motor short circuit| Change new motor
C) driving position hinder| Adjust driving position, or add oil
Ell| Input voltage too big| Stop using, ask electrician to check
E14| Input voltage too low| Stop using, ask electrician to check

THE OBVIOUS DANGER LIST

Folding
1.2| Shearing| Inclining
Folding
1.3| Drawing-in Or Trapping| Rear roller
Drive system
1.4|

Falling

| Sudden starts/stops
Excessive speed variation
Support failure
1.5| Abrasion| Contact with moving running surface
1.6| Slippery Surface| Slipping and falling
1.7| Stored Energy| Folded treadmills falling down
Springs or elastic devices prior to assembly
2.| Electrical Hazards|
2.1| Electrocution| Contact with live components
3.| Thermal Hazards|
3.1| Burns| Contact with hot surfaces
4.| Hazards generated by neglecting ergonomic principles in the design process|
4.1| Ineffective ergonomics| Size or location of support surfaces
Running surface dimensions
4.2| Human errors human behavior| Reasonably foreseeable misuse
5.| Noise Hazards|
5.1| Disturbing acoustic communication| Moving the treadmill motor and belt

• A correct lubrication of the treadmill with silicon oil or Teflon is IMPORTANT.
• This lubrication MUST BE PERFORMED REGULARLY DEPENDING ON EACH PERSON, EVEN BEFORE ITS FIRST USE.
• YOU MUST PRESERVE THE ORIGINAL PACKAGING WITH ITS PROTEC- TIONS, PURCHASE RECEIPT, MANUAL AND COMPONENTS DURING THE GUARANTEE PERIOD.

WARRANTY

• We have a one-year quality warranty on the products.
• Within the warranty period, we provide FREE replacement parts.
• If caused by incorrect assembly, incorrect use, or change of parts failures, our company takes no responsibility.
• You should show our products series no. and relative pictures or information before getting the warranty.
• This treadmill is only for home use, if problems occur by commercial use, our company takes no responsibility.

NOTE
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the inter- ference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications to this unit not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

WORKOUT GUIDELINES

• BEWARE: Before starting to use this or any exercise programs, consult your doctor. This is especially important for people older than 35 years old, or people with health problems. If your equipment is provided with a pulse sensor, you must keep in mind this isn’t a medical instrument. Several factors can vary the accuracy of the heart rate interpretations. The pulse sensor is just a help for the workouts, determining the general tendencies of the heart rate.

PROGRAMM WITH WARM-UP WORKOUTS:

• WARM UP : Start stretching and slightly activating the muscles between 5 and 10 minutes. The warm-up will increase your corporal temperature, your heart rate, and your blood flow, making you ready for the workouts.
• WORKOUT FOCUSED ON THE TRAINING AREA: Do some exercises for 20-30 minutes with your heart rate (don’t maintain your heart rate for more than 20 minutes during the first weeks of the exercise program). Breathe constantly and deeply during the workout (never hold your breath).
• COOL DOWN: Finish with stretching exercises for 5-10 minutes. Stretching increases the flexibility of your muscles and helps you to avoid injuries after the workouts.
• FREQUENCY OF THE WORKOUT: To be fit or improve your shape, complete three workout sessions each week, with a rest day between the workouts. After some months of regular training, you will be able to complete up to five workouts a week.

CUSTOMER SERVICE

• [email protected].

CAUTION: Read all precautions and instructions in this manual before using this equipment. Keep this manual for future reference.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>