kmart 43170005 Beaded Pendant Installation Guide
- June 4, 2024
- Kmart
Table of Contents
kmart 43170005 Beaded Pendant
INSTRUCTIONS FOR INSTALLATION
Caution
Before adding or replacing your pendant, make sure the electricity is switched
off and any plugs are removed from the wall socket. Always allow bulb to cool
completely before installation. CautionAlways ensure pendant is completely
installed and secure before connecting to an electricity supply. 1.Remove
Beaded Pendant from packaging. 2.If you are using an E27 Edison Screw Bulb,
remove Part(A) from the shade as per diagram. If you are using an E14 Edison
Screw Bulb, please place the adaptor in the open gap. 3.Install Beaded Pendant
to light fitting. 4.Install Globe (not included) into the Lamp Holder. 5.Check
to ensure that all the components have been assembled correctly. 6.Connect to
electricity to see Beaded Pendant light up.
Care information
- Carefully read all instructions for the assembly and use of this product before connecting to an electricity supply.
- Light bulbs become very hot in seconds. Do not attempt to touch the light while the lamp is lit and supervise others accordingly.
- Before cleaning or replacing shade, switch off the light and unplug from the mains socket. Allow the bulb to cool for at least 10minutes before touching it and making the change.
- Ensure the new bulb is secure in the lamp holder before reconnecting to the power supply. If in doubt, consult a qualified electrician.
FOR INDOOR USE ONLY
Documents / Resources
|
kmart 43170005 Beaded
Pendant
[pdf] Installation Guide
43170005 Beaded Pendant, 43170005, Beaded Pendant, Pendant
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>