Bingguz A5 150 Inches Extra Wide Retractable Baby Gate Instruction Manual
- June 15, 2024
- Bingguz
Table of Contents
Growing up together with your kids
Retractable
Safety Gate
Instruction Manual
ItemNo:SH20.006C
A5 150 Inches Extra Wide Retractable Baby Gate
IMPORTANT!READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY AND KEEP FOR
GENERAL
Read this instruction manual carefully and keep it in a safe place for future
reference.The correct use and maintenance of this product is essential.
MAINTENANCE
Regularly check that the gate is functioning correctly,lubricate hinges and
moving components with a suitable spray lubricant.
Tighten and adjust mounts to ensure secure smooth operation.
Inspect all components regularly and stop using if any component is damaged or
missing.
WARNINGS
WARNING To prevent serious injury or death,securely install gate or enclosure
and use according to manufacturer’s instructions.
WARNING Incorrect installation can be dangerous.
WARNING Danger to older children if climbing over the product.
WARNING Do not use the safety barrier if any components are damaged or
missing.
WARNING The safety barrier must not be fitted across windows.
WARNING Never install this product on glass doors.Install this product against
reliable doors or walls.
WARNING If the safety barrier is used at the top of the stairs, it should not
be positioned below the top level.
WARNING If the safety barrier is used at the bottom of the stairs, it should
be positioned at the front of the lowest tread possible.
WARNING This satety barrier is for domestic use only.
WARNING This satety has a manual closing system.
WARNING Never leave the child unattended when using this product.
WARNING Children have died or been seriously injured when gates/enclosures are
not securely installed.
WARNING Do not put any goods which can be grabbed by children or pets near
this product to prevent injury.
WARNING Before using this product,carefully inspect for any loose parts and
whether any parts need to be tightened.
WARNING Never use to keep child away from pool.
WARNING This product is intended for use with children from 6 to 24 months or
small to medium pets from 4.5kg(10 Ibs) up to 18kg (40 Ibs).
WARNING Always check that safety barrier is correctly closesd.
WARNING Use only with the locking/latching mechanism securely engaged
WARNING Gate must be installed as close to the ground as possible,as per the
installation guides.
WARNING Never use with a child able to climb over or dislodge/open the gate or
enclosure.
WARNING Regularly check that the safety barrier is properly installed and
secure.
WARNING Always install and use as directed using all parts. Any additional or
replacement parts should be obtained from after sales support.
WARNING Barrier must be fitted between rigid surfaces such as plaster
board,timber or hard wall.
WARNING The gate extends up to 150″ wide and 34″ tall, the minimum width of
the opening is 27.6in,maximum width of opening is 118 in,the best width of
opening is 35.4in.
MOUNTINGS
Gate must be installed in a structurally sound opening.Ensure mounting
surface(wall,door frame, stair posts,etc) is strong,rigid and has an even
surface.
Note:If using gate on stairs,it must be placed either on the top step or
on the lowest step at the bottom.
Select the appropriate fixing method from the following list.
WOOD MOUNTING
Drill 5/64”(2mm) pilot holes and use the wood screws provided screwing
directly into the wood.
FOR INSTALLATION
Wood Screws
DRY WALL MOUNTING
Locate the wood stud and follow the ‘wood mounting instructions. Do not mount
into dry wall without additional support.
HARD WALL MOUNTING BRICK
Drill 15/64”(6mm) pilot holes pilot holes and about 30mm deep, insert anchor
insert anchor and secure with screws.
FOR INSTALLATION
Wood Screws Anchor
HARD WALL MOUNTING CONCRETE
Drill 15/64”(6mm) pilot holes pilot holes and about 30mm deep, insert anchor
insert anchor and secure with screws.
This gate must only be fixed to a solid and secure surface. If unsure, check
with a qualified builder or trades person that the installation you intend is
suitable and safe within the chosen location.
TOOLS PREPARATION:
PLEASE SELECT THE PROPER ACCESSORIES AND A SUITABLE WALL.
Install on wooden material.| Install on a hard wall.
Do notinstall onto dry wood, or glass
walls.
MEASUREMENT PREPARATION :
Measure the door width to ensure that the gate can be installed normally.
WHAT’S IN THE BOX
PARTS
INSTALLATION
GATE PLACEMENT
SUITABLE PLACEMENT OF GATE AND CATCH MOUNT
Inside Opening or Doorway 
Outside Opening or Doorway
INSTALLATION STEPS
Note:
Thank you very much for purchasing this product. The whole installation
process takes about 20 minutes. Please read the installation manual
carefully,find the corresponding components and select the right location to
be installed. Please prepare an electric drill a mark pen and a screw driver.
The product must be installed on the ground to better realize the separation
function.
1. Main body Gate.| 2. Install Upper Bracket on the Gate.| 3. Install Lower
Bracket on the Gate.
4, Select the installation location, make sure the bottom of the main body
door Gate is on the ground, and then mark the holes position of the Upper
Bracket with a pen.| 5. If there are without baseboard on the wall : Mark the
holes position of the Lower Bracketwith a pen and please keep the gate
vertical.| 6. If there are baseboard on the wall, Please slide Lower
Bracketup to the suitable position until go around the baseboard and mark the
holes position of the Lower Bracketwith a pen.
7.Take out Upper Bracket from Gate according to the arrow.| 8. Take out Lower
Bracket from Gate according to the arrow .| 9. Drill Upper Bracket to wall as
the marks.
10.DrillLower Bracketto wall as the marks.| 11.InstallGate to Upper Bracket as
the arrow.| 12.InstallGate to Lower Bracketas the arrow ,please make sure
install Gate to Upper Bracket at first then install Gate to Lower Bracket.
13.Pull the cloth horizontally to the opposite door frame to find the
installation position of Latches.| 14.Press the button to lock.| 15. Hook the
upper Latches and mark the holes position of the upper Latches with a pen and
make sure the gate is Vertical.
16.Hook the lower Latches and mark the holes position of the lower Latches
with a pen and make sure the gate is Vertical.| 17.Pull the cloth, then press
the button to unlock, Let the cloth roll back.| 18.Orill the upper Latches to
wall as the marks,
19.Drill the lower Latches to wail as the marks.| 20.The installation is
complete, Enjoy your gate!| 21,Enjoy your gate!
ADJUSTABLE LOWERGATE MOUNT
TO REMOVE
2.When press the button and also put upward the gate from the Bracket at the
same time.
1.Press the button
OPERATION
HOW TO LOCK THE GATE
Note: When gate is retracting
always hold the handle and guide the gate evenly back into its original
position. Never let go of handle when gate is retracting.
HOW TO OPEN THE GATE
Note: When gate is
retracting always hold the handle and guide the gate evenly back into its
original position. Never let go of handle when gate is retracting.
CLEANING INSTRUCTIONS
Simply use a soft damp cloth to wipe gate, dry after cleaning.
Do not use chemical or abrasive cleaners.
Thank you very much for choosing our products. Please read
instruction manuals carefully before using this retractable safety gate.
Do not use if any part is Broken, Torn or Missing.
Please retain the instruction manual for future reference.
MADE IN CHINA
Documents / Resources
|
Bingguz A5 150 Inches Extra Wide Retractable Baby
Gate
[pdf] Instruction Manual
A5 150 Inches Extra Wide Retractable Baby Gate, A5, 150 Inches Extra Wide
Retractable Baby Gate, Wide Retractable Baby Gate, Retractable Baby Gate, Baby
Gate
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>