NINJA OP100EU Mini 4.7L Multi Cooker Instruction Manual
- June 15, 2024
- Ninja
Table of Contents
- NINJA OP100EU Mini 4.7L Multi Cooker
- Product Information
- Product Usage Instructions
- IMPORTANT SAFEGUARDS
- PARTS & ACCESSORIES
- FUNCTION BUTTONS
- USING YOUR FOODI® MINI MULTI-COOKER
- ACCESSORIES FOR PURCHASE
- CLEANING & MAINTENANCE
- TROUBLESHOOTING GUIDE
- PRODUCT REGISTRATION
- TECHNICAL SPECIFICATIONS
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
NINJA OP100EU Mini 4.7L Multi Cooker
Product Information
Specifications
- Model Number: OP100EU
- Watt: 1460 W
- Volumen: 4,7 l
Product Usage Instructions
Important Safety Precautions
Please read and follow these safety precautions to ensure safe usage of the
product
- Do not use the appliance if the removable pot is not inserted.
- Do not use this appliance for deep frying.
- Do not use this appliance to cook instant rice.
Components
The product includes the following components
- Cook & Crisp plate
- Stand
- 4.7L removable pot
- Heat shield
- Control panel
- Motor unit (cord not shown)
- Pressure release valve
- Float valve
- Silicone ring
- Vent valve
- Condensation collector
Using the Control Panel
The control panel has function buttons and operation buttons:
Function Buttons
- Long Cook: Use this function to cook food at lower temperatures for a longer duration.
Operation Buttons
- TEMP arrows : Use the up and down TEMP arrows to adjust the cooking temperature and/or pressure level.
- TIME arrows : Use the up and down TIME arrows to adjust the cooking time.
Pressure Cooking
Follow these steps for pressure cooking
- Place the silicone ring on the lid and secure it with the ring holder.
- Press the “PRESSURE” button.
- Adjust the cooking time using the TIME arrows in 15-minute intervals up to eight hours.
- Close the lid and make sure it is properly sealed.
- Select the desired cooking function using the function buttons.
- Press the “START/STOP” button to start cooking.
Frequently Asked Questions (FAQ)
-
Q: Can I use the appliance without inserting the removable pot?
A: No, it is important to always insert the removable pot before using the appliance. -
Q: Can I use this appliance for deep frying?
A: No, this appliance is not designed for deep frying. -
Q: Can I use this appliance to cook instant rice?
A: No, this appliance is not suitable for cooking instant rice.
IMPORTANT SAFEGUARDS
HOUSEHOLD USE ONLY
READ ALL INSTRUCTIONS BEFORE USE
Read all instructions before using your Ninja® Foodi®.
When using electrical appliances, basic safety precautions should always be
followed, including the following:
WARNING
-
This appliance can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
-
Keep the appliance and its cord out of reach of children. DO NOT allow the appliance to be used by children. Close supervision is necessary when using near children.
-
To eliminate a choking hazard for young children, remove and discard the protective cover fitted on the power plug of this appliance.
-
Children should not play with the appliance.
-
NEVER use socket below counter.
-
NEVER connect this appliance to an external timer switch or separate remote-control system.
-
DO NOT use an extension cord. A short power-supply cord is used to reduce the risk of children less than 8 years grabbing the cord or becoming entangled and to reduce the risk of people tripping over a longer cord.
-
To protect against electrical shock DO NOT immerse cord, plugs, or main unit housing in water or other liquid. Cook only in the pot provided or in a container recommended by SharkNinja placed in the provided pot.
-
Regularly inspect the appliance and power cord. DO NOT use
the appliance if there is damage to the power cord or plug. If the appliance malfunctions or has been damaged in any way, immediately stop use and call Customer Service. -
ALWAYS tilt the lid so that it is between your body and the inner pot so that you can be shielded from steam and hot liquids.
-
ALWAYS ensure the appliance is properly assembled before use.
-
Before use, ALWAYS check pressure release valve and red float valve for clogging or obstruction, and clean them if necessary. Check to make sure the red float valve on the pressure lid moves freely. Foods such as apple sauce, cranberries, pearl barley, oatmeal or other cereals, split peas, noodles, macaroni, rhubarb, or spaghetti can foam, froth, and splutter when pressure cooked, clogging the pressure release valve. These and similar expanding foods (such as dried vegetables, beans, grains, and rice) should not be cooked in a pressure cooker, except when following a Ninja® Foodi® recipe.
-
DO NOT cover the air intake vent or air socket vent while crisping lid is closed. Doing so will prevent even cooking and may damage the unit or cause it to overheat.
-
To prevent risk of explosion and injury, use only SharkNinja Silicone rings. Make certain silicone ring is installed and lid is properly closed before operating. DO NOT use
if torn or damaged. Replace before using. -
Before placing removable cooking pot into the cooker base, ensure pot and cooker base are clean and dry by wiping with a soft cloth.
-
This appliance is for household use only. DO NOT use this appliance for anything other than its intended use. DO NOT use in moving vehicles or boats. DO NOT use outdoors. Misuse may cause injury.
-
Intended for worktop use only. Ensure the surface is level, clean and dry. DO NOT move the appliance when in use.
-
DO NOT place appliance on hot surfaces or near a hot gas or electric burner or in a heated oven.
-
DO NOT use accessory attachments not recommended or sold by SharkNinja. DO NOT place accessories in a microwave, toaster oven, convection oven, or conventional oven or on a ceramic cooktop, electric coil, gas burner range, or outdoor grill. The use of accessory attachments not recommended by SharkNinja may cause fire, electric shock, or injuries.
-
When using this appliance, provide adequate space above and on all sides for air circulation.
-
ALWAYS follow the maximum and minimum quantities of liquid as stated in instructions and recipes.
-
NEVER use SLOW COOK setting without food and liquids in the removable cooking pot.
-
DO NOT use the appliance without the removable cooking pot installed.
-
DO NOT use this appliance for deep frying.
-
DO NOT cover the pressure valves.
-
DO NOT sauté or fry with oil while pressure cooking.
-
Prevent food contact with heating elements. DO NOT overfill or exceed the MAX fill level when cooking. Overfilling may cause personal injury or property damage or affect the safe use of the appliance.
-
When pressure cooking foods that expand (such as dried vegetables, beans, grains, rice, etc.). DO NOT fill pot more than halfway, or as otherwise instructed in a Ninja® Foodi® recipe.
-
DO NOT use this unit to cook instant rice.
-
To prevent food contact with the heating elements, DO NOT overfill the Cook & Crisp Basket.
-
Use extreme caution when closing the crisping lid, taking care that nothing is caught in or pinched by the hinge.
-
Socket voltages can vary, affecting the performance of your product. To prevent possible illness, use a thermometer to check that your food is cooked to the temperatures recommended.
-
DO NOT place the appliance near the edge of a worktop during operation.
SAVE THESE INSTRUCTIONS
-
To avoid possible steam damage, place the unit away from walls and cabinets during use.
-
Should the unit emit black smoke, unplug immediately and wait for smoking to stop before removing the cooking pot and Cook & Crisp Basket.
-
DO NOT touch hot surfaces. Appliance surfaces are hot during and after operation. To prevent burns or personal injury, ALWAYS use protective hot pads or insulated oven mitts and use available handles and knobs.
-
Extreme caution must be used when the cooker contains hot oil, hot food, or hot liquids, or if the cooker is under pressure. Improper use, including moving the cooker, may result in personal injury. When using this appliance to pressure cook, ensure the lid is properly assembled and locked into position before use.
-
Caution should be used when searing meats and sautéing in hot oil. Keep hands and face away from the removable cooking
pot, especially when adding new ingredients, as hot oil may splatter. -
When unit is in operation, hot steam is released through the air socket vent. Place unit so vent is not directed toward the power cord, sockets, or other appliances. Keep your hands and face at a safe distance from vent.
-
DO NOT attempt to open the lid during or after pressure cooking until all internal pressure has been released through the pressure release valve and the unit has cooled slightly. DO NOT tamper with, disassemble, or otherwise remove the red float valve or pressure release assembly.
-
When using SLOW COOK or SEAR/SAUTÉ settings, ALWAYS keep the pressure lid closed and the pressure release valve in the VENT position. If the lid is closed and the pressure release valve is in the SEAL position, an audible alarm will sound. “VENT” error code will appear on LED display to signal the need to turn the pressure release valve to the VENT position.
-
When using the PRESSURE COOK setting, ALWAYS keep the pressure lid locked and the pressure release valve turned anticlockwise to the SEAL position.
-
If the lid will not turn to unlock, this indicates the appliance is still under pressure. Any pressure remaining can be hazardous. Let unit naturally release pressure or turn the Pressure Release Valve slowly to the VENT position to release steam. Take care to avoid contact with the releasing steam to avoid burns or injury. When the steam is completely released, the red float valve will be in the lower position allowing the lid to be removed.
-
Spilled food can cause serious burns. Keep appliance and cord away from children. DO NOT let cord hang over edge of tables or counters or touch hot surfaces.
-
When removable cooking pot is empty, DO NOT heat it for more than 10 minutes, as doing so may damage the cooking surface.
-
The cooking pot, Cook & Crisp Basket, and reversible rack become extremely hot during the cooking process. Avoid hot steam and air while removing the cooking pot and Cook & Crisp Basket from the appliance, and ALWAYS place them on a heat resistant surface after removing. DO NOT touch accessories during or immediately after cooking.
-
Removable cooking pot can be extremely heavy when full of ingredients. Care should be taken when lifting pot from cooker base.
-
Cleaning and user maintenance shall not be made by children unless they are older than 8 and supervised.
-
Let the appliance cool for approximately 30 minutes before handling, cleaning, or storing.
-
To disconnect, turn any control to “off”, then unplug from socket when not in use and before cleaning. Allow to cool before cleaning, disassembly, putting in or taking off parts and for storage.
-
DO NOT clean with metal scouring pads. Pieces can break off the pad and touch electrical parts, creating a risk of electric shock.
-
Please refer to the Cleaning & Maintenance section for regular maintenance of the appliance.
PARTS & ACCESSORIES
PARTS
- A Cook & Crisp Plate
- B Rack
- C 4.7L Removable Cooking Pot
- D Crisping Lid
- E Heat Shield
- F Control Panel
- G Cooker Base (power cord not shown)
- H Pressure Lid
- I Pressure Release Valve
- J Float Valve
- K Silicone Ring
- L Anti-Clog Cap
- M Air Outlet Vent
- N Condensation Collector
To order additional parts and accessories, visit ninjakitchen.eu or contact Customer Service at 0800 862 0453.
USING THE CONTROL PANEL
FUNCTION BUTTONS
- PRESSURE : Cook food quickly while maintaining tenderness.
- STEAM : Gently cook delicate foods at a high temperature.
- SLOW COOK : Slow cook food at lower temperatures.
- SEAR/SAUTÉ : Use the unit as a stovetop for browning meats, sautéing veggies, simmering sauces, and more.
- AIR CRISP : Give foods crispiness and crunch with little to no oil.
- BAKE/ROAST: Use the unit as an oven for tender meats, baked treats, and more.
OPERATING BUTTONS
- TEMP arrows : Use the up and down TEMP arrows to adjust the cook temperature and/or pressure level.
- TIME arrows: Use the up and down TIME arrows to adjust the cook time.
- NOTE : The temperature and time can be adjusted anytime during cooking by using the up and down TEMP and TIME arrows. The unit will then resume at those settings.
- START/STOP button : Press the
- START/STOP button after selecting your temperature (or pressure) and time to start cooking. Pressing this button while the unit is cooking will stop the current function.
- KEEP WARM button: After pressure cooking, steaming, or slow cooking, the unit will automatically switch to Keep Warm mode and start counting up. Keep Warm will stay on for 12 hours, or you may press KEEP WARM to turn it off. Keep Warm mode is not intended to reheat food, but to keep it warm at a food-safe temperature.
- POWER button : The Power button turns the unit on and off and stops all cooking modes.
BEFORE FIRST USE
- Remove and discard any packaging material, promotional labels, and tape from the unit.
- Please pay particular attention to operational instructions, warnings, and important safeguards to avoid any injury or property damage.
- Wash the pressure lid, Silicone ring, removable cooking pot, Cook & Crisp Plate, rack and condensation collector in hot, soapy water, then rinse and dry thoroughly.
- NEVER clean the cooker base in the dishwasher. Inspect the pressure lid to ensure there is no debris blocking the valves.
- The Silicone ring is reversible and can be inserted in either direction. Insert the Silicone ring around the outer edge of the Silicone ring rack on the underside of the lid. Ensure it is fully inserted and lies flat under the Silicone ring rack.
INSTALLING THE CONDENSATION COLLECTOR
The condensation collector comes installed in the unit. Slide it out to remove
for washing after each use.
REMOVING & REINSTALLING THE ANTI-CLOG CAP
Make sure your anti-clog cap is in the correct position before using the
pressure lid. The anti-clog cap protects the inner valve of the pressure lid
from clogging and protects users from potential food splashes. It should be
cleaned after every use with a cleaning brush. To remove it, squeeze and pull
upward. To reinstall, position it in place and press down.
NOTE: Prior to each use, make sure the Silicone ring is well seated in the Silicone ring rack and the anti-clog cap is mounted properly on the pressure release valve.
USING YOUR FOODI® MINI MULTI-COOKER
WHY TWO LIDS?
The two lids allow you to seamlessly transition between all your favourite
cooking methods. Use the pressure lid to tenderise, then use the crisping lid
to crisp up your food.
USING THE CRISPING LID
The crisping lid is attached to the unit by a hinge and features an easy-open
design. The lid can be opened when using AIR CRISP and BAKE/ROAST functions so
you can check on or stir the ingredients. When the lid is opened, cooking will
stop, the timer will pause, and the heating element in the lid will turn off.
When the lid is closed, the cooking an timer functions will resume.
USING THE COOKING FUNCTIONS WITH THE CRISPING LID
To turn on the unit, plug the power cord into a wall socket, then press the
Power button.
Air Crisp
- Press the AIR CRISP button. The default temperature setting will display. Use the up and down TEMP arrows to set a temperature between 150°C and 210°C.
- Use the up and down TIME arrows to set the cook time in minute increments up to 1 hour.
- With the pot installed, place the crisping plate into the pot. NOTE : It is recommended to let the unit preheat for 5 minutes before adding ingredients. If preheating, before step 4, close the lid, and press the START/STOP button to begin.
- Add ingredients to the pot. Close the lid and press the START/STOP button to begin cooking.
- During cooking, you can open the lid and lift out the pot to shake or toss ingredients for even browning, as needed. When done, lower pot and close lid. Cooking will automatically resume after lid is closed.
- When cook time is complete, the unit will beep and display END.
Bake/Roast
-
Press the BAKE/ROAST button. The default temperature setting will display. Use the up and down TEMP arrows to set a temperature between 120°C and 210°C.
-
Use the up and down TIME arrows to set the cook time in 1-minute increments up to 1 hour, and in 5-minute increments from 1 hour to 4 hours. NOTE : If running for 1 hour or less the clock will count down by minutes and seconds. If running for more than 1 hour the clock will count down by minutes only.
NOTE : It is recommended to let the unit preheat for 5 minutes before adding ingredients. If preheating, before step 3, close the lid, and press the START/STOP button to begin. -
Place ingredients in the pot or into the accessory called for in the recipe (then place accessory in the pot). Close the lid and press the START/STOP button to begin cooking.
-
When cook time is complete, the unit will beep and display DONE.
FAMILIARISING YOURSELF WITH PRESSURE COOKING
In order to familiarise yourself with pressure cooking, it is highly
recommended for first-time users to do an initial run.
- Place the pot in the cooker base and add 500ml room-temperature water to the pot.
- Assemble the pressure lid by aligning the arrow on the front of the lid with the arrow on the front of the cooker base. Then turn the lid clockwise until it locks into place.
- Make sure the pressure release valve on the lid is in the SEAL position.
- Turn the unit on. Press the PRESSURE button, the unit will default to high (HI) pressure. Set the time to 2 minutes and press the START/STOP button to begin.
- The unit will begin building pressure, indicated by the rotating lights. The unit will begin counting down when it is fully pressurised
- When the countdown is finished, the unit will beep, automatically switch to Keep Warm mode, and begin counting up.
- Turn the pressure release valve to the VENT position to quick release the pressurised steam. A quick burst of steam will spurt out of the pressure release valve. When steam is completely released and the float valve drops down, the unit will be ready to open.
NATURAL PRESSURE RELEASE VS. QUICK PRESSURE RELEASE
Natural Pressure Release: Once pressure cooking is complete, the pressure will
start to naturally release as the unit cools down. During this time, the unit
will switch to Keep Warm mode. When natural pressure release is complete, the
float valve will drop down.
NOTE: Press the KEEP WARM button if you would like to turn Keep Warm mode off.
Quick Pressure Releas e: Use ONLY when called for in a recipe. When
cooking is complete, the unit will switch to Keep Warm mode. Turn the pressure
release valve to the VENT position to instantly release pressure through the
valve.
When quick pressure release is complete the float valve will drop down. Even
after releasing pressure, some steam will remain in the unit and will escape
when the lid is opened. Lift and tilt it away from you, making sure no
condensation drips into the cooker base.
NOTE: At any time during the natural release process, you can switch to quick release by turning the pressure release valve to the VENT position.
PRESSURISING
As pressure builds in the unit, the control panel will display rotating
lights. Pressurising time varies, depending on the amount of ingredients and
liquid in the pot. As the unit pressurises, the lid will lock as a safety
measure, and it will not unlock until pressure is released. Once the unit has
reached full pressure. The cooking cycle will begin and the timer will start
counting down.
INSTALLING & REMOVING
THE PRESSURE LID
- Place the pressure lid on top of the unit with the on the lid and the on the base lined up evenly. Turn the lid clockwise until it locks in place.
- To unlock the pressure lid, turn it counterclockwise. Lift the lid at an angle to prevent splatter. Do not lift the lid straight up.
NOTE: The pressure lid will not unlock until the unit is completely depressurised.
WARNING: Serious burns can result from the steam inside. ALWAYS lift and tilt the lid towards you when removing.
USING THE COOKING FUNCTIONS WITH THE PRESSURE LID
To turn on the unit, plug the power cord into a wall socket, then press the
Pressure Cook
- Place the ingredients and at least 250ml of liquid in the pot, as well as any necessary accessory. DO NOT fill the pot past the PRESSURE MAX line. NOTE : When cooking rice, beans, or other ingredients that expand, do not fill the pot more than halfway.
- Follow the steps on page 63 to install the pressure lid. Turn the pressure release valve to the SEAL position.
- Press the PRESSURE button. The default pressure level will display. Use the up and down TEMP arrows to select either HIGH or LOW. NOTE : If running for 1 hour or less the clock will count down by minutes and seconds. If running for more than 1 hour the clock will count down by minutes only.
- Use the up and down TIME arrows to set the cook time 1-minute increments up to 1 hour, and in 5-minute increments from 1 hour to 4 hours.
- Press the START/STOP button. The display will show rotating lights during this time. When the unit reaches the proper temperature, the time you set will begin counting down.
- When cook time is complete, the unit will beep, automatically switch to Keep Warm mode, and start counting up from 00:00. NOTE : After cooking is complete, you may press the KEEP WARM button to turn the Keep Warm mode off.
- Let the unit naturally release pressure or, if the recipe instructs, turn the pressure release valve to the VENT position, quickly releasing steam through the valve.
Steam
- Install the cooking pot in the cooker base. Add at least 250ml of liquid (or the amount stated in your recipe) to the pot, then place the rack with ingredients in the pot.
- Follow the steps provided earlier to install the pressure lid. Turn the pressure release valve to the VENT position.
- Press the STEAM button. Use the up and down TIME arrows to set the cook time in minute increments up to 30 minutes. NOTE : There is no temperature adjustment available or necessary when using the STEAM function.
- Press the START/STOP button.
- The unit will automatically preheat to bring the steaming liquid to a boil. The display will show rotating lights during this time. When the unit reaches the proper temperature, the time you set will begin counting down.
- When cook time is complete, the unit will beep and automatically switch to Keep Warm mode. If the float valve pops up, wait for it to drop and then you can open the lid. NOTE : After cooking is complete, you may press the KEEP WARM button to turn the Keep Warm mode off.
Slow Cook
-
Install the cooking pot in the cooker base. Place ingredients in the pot. DO NOT exceed the line marked MAX when slow cooking.
-
Follow the steps provided earlier to install pressure lid. Turn the pressure release valve to the VENT position.
-
Press the SLOW COOK button. The default temperature setting will display. Use the up and down TEMP arrows to select either Slow Cook HIGH or LOW.
-
Use the up and down TIME arrows to set the cook time in 15-minute increments up to 8 hours.
-
Press the START/STOP button to begin cooking.
NOTE : The Slow Cook HIGH time setting may be adjusted anywhere between 4 and 8 hours; the Slow Cook LOW time setting may be adjusted anywhere between 6 and 8 hours. -
When cook time is complete, the unit will beep and automatically switch to Keep Warm mode.
Sear/Sauté
- Install the cooking pot in the cooker base.
- Press the SEAR/SAUTÉ button. The default temperature setting will display. Use the up and down TEMP arrows to select one of the setting options: Lo 1 [low], 2 [low-medium], 3 [medium], 4 [medium-high], Hi 5 [high]. NOTE : There is no time adjustment available or necessary when using the Sear/Sauté function.
- Press the START/STOP button to begin cooking.
- To turn off the Sear/Sauté function, press the START/STOP button. To switch to a different cooking function, press the corresponding function button.
NOTE : You can use this function with either the crisping lid in the open position or the pressure lid with the pressure release valve in the VENT position.
NOTE : ALWAYS use non-stick utensils in the cooking pot. DO NOT use metal utensils, as they will scratch the non-stick coating on the pot.
ACCESSORIES FOR PURCHASE
We offer a range of accessories custom made for your Ninja® Foodi® Mini TenderCrisp Multi-Cooker. Visit ninjakitchen.eu to expand your capabilities and take your cooking to the next level.
-
Cooking Pot An extra pot so you can keep the Foodi fun going when your other pot is already full of delicious food.
-
Silicone Muffin Mould Bake your favourite mini muffins, cupcakes or egg bites in this flexible mould.
-
Glass Lid See into the pot during multiple cooking functions, then use to transport or store easily.
-
Loaf Tin Our specially designed tin is the perfectly sized baking accessory for bread mixes like banana and courgette.
Dimensions: L21cm x W11cm x H9cm approx -
Extra Pack of Silicone Rings 2-pack silicone ring set helps keep flavours separate. Use one when cooking savoury foods and the other when cooking sweet foods.
-
Silicone Mitts Easily lift your cooking pot and accessories with these heat-resistant silicone mitts.
-
Crisper Pan Crisp and reheat pizzas quesadillas and vegetables.
-
Multi-Purpose Pan Create casseroles, dips and sweet and savoury pies, or bake a fluffy, moist cake with a golden top for dessert.
-
Dimensions: D22cm H6cm.
CLEANING & MAINTENANCE
Cleaning: Dishwasher & Hand-Washing
The unit should be cleaned thoroughly after every use.
-
Unplug the unit from the wall socket before cleaning.
-
To clean the cooker base and the control panel, wipe them clean with a damp cloth.
-
The pressure lid, cooking pot, silicone ring, rack and Cook & Crisp Plate can be washed in the dishwasher.
NOTE : NEVER put the cooker base in the dishwasher, or immerse it in water or any other liquid. -
The pressure release valve and anti-clog cap, can be washed with water and dish soap.
-
To clean the crisping lid, wipe it down with a wet cloth or paper towel after the heat shield cools.
-
If food residue is stuck on the cooking pot, rack, or Cook & Crisp Plate, fill the pot with water and allow to soak before cleaning. DO NOT use scouring pads. If scrubbing is necessary, use a non-abrasive cleanser or liquid dish soap with a nylon pad or brush.
-
Air-dry all parts after each use.
NOTE : DO NOT take apart the pressure release valve or float valve assembly.
Removing & Reinstalling the Silicone Ring
To remove the silicone ring, pull it outward, section by section, from the
silicone ring rack. The ring can be installed with either side facing up. To
reinstall, press it down into the rack section by section.
After use, remove any food debris from the silicone ring and anti-clog cap.
Keep the silicone ring clean to avoid odour
Washing it in warm, soapy water or in the dishwasher can remove odour.
However, it is normal for it to absorb the smell of certain acidic foods. It
is recommended to have more than one silicone ring at hand. You can purchase
additional silicone rings at ninjakitchen.eu
NEVER pull out the silicone ring with excessive force, as this may deform it and the rack and affect the pressure-sealing function. A silicone ring with cracks, cuts, or other damage should be replaced immediately.
TROUBLESHOOTING GUIDE
- Why is my unit taking so long to come to pressure? How long does it take to come to pressure?
- Cooking times may vary based on the selected temperature, current temperature of the cooking pot and temperature or quantity of the ingredients.
- Check to make sure your silicone ring is fully seated and flush against the lid. If installed correctly, you should be able to tug lightly on the ring to rotate it.
- Check that the pressure lid is fully locked, and the pressure release valve is in the SEAL position when pressure cooking.
- Why is the time counting down so slowly?
- You may have set hours rather than minutes. When setting time, the display will show HH:MM and the time will increase/decrease in minute increments.
- How can I tell when the unit is pressurising?
- The progress bar will display on the screen to indicate the unit is building pressure. Progress bars are showing on the display screen when using the Pressure or Steam function.
- Lights are rotating on the display screen when using the Pressure or Steam function.
- The progress bar indicates the unit is building pressure or preheating when using STEAM or PRESSURE. When the unit has finished building pressure, your set cook time will begin counting down.|
- There is a lot of steam coming from my unit when using the Steam function.
- It’s normal for steam to release through the pressure release valve during cooking. Leave the pressure release valve in the VENT position for Steam, Slow Cook, and Sear/Sauté.
- Why can’t I take the pressure lid off?
- As a safety feature, the pressure lid will not unlock until the unit is completely depressurised. To release pressure, turn the pressure release valve to the VENT position to quick release the pressurised steam. A quick burst of steam will spurt out of the pressure release valve. When the steam is completely released, the unit will be ready to open. Turn the pressure lid counterclockwise, then lift it up and away from you.
- Is the pressure release valve supposed to be loose?
- Yes. The pressure release valve’s loose fit is intentional; it enables a quick and easy transition between SEAL and VENT and helps regulate pressure by releasing small amounts of steam during cooking to ensure great results. Please make sure it is turned as far as possible toward the SEAL position when pressure cooking and as far as possible toward the VENT position when quick releasing.
- The unit is hissing and not reaching pressure.
- Make sure the pressure release valve is turned to the SEAL position. If you’ve done this and still hear a loud hissing noise, it may indicate your silicone seal is not fully in place. Press START/STOP to stop cooking, VENT as necessary, and remove the pressure lid. Press down on the silicone ring, ensuring it is fully inserted and lies flat under the ring rack. Once fully installed, you should be able to tug lightly on the ring to rotate it.
- The unit is counting up rather than down.
- The cooking cycle is complete and the unit is in Keep Warm mode.
- How long does the unit take to depressurise?
- The time it takes to release pressure depends on the quantity of food in the system and can vary from recipe to recipe. Always ensure the float valve has dropped before trying to remove the lid. If the
- system is taking longer than normal to depressurise please unplug the unit and wait until the float valve drops before interacting with the product.
- “ADD POT” error message appears on display screen.
- Cooking pot is not inside the cooker base. Cooking pot is required for all functions. “OTHR LID” error message appears on display screen.
- The incorrect lid is installed for your desired cooking function. Place the pressure lid on the unit if you want to use the Pressure, Slow Cook, Steam, Sear/Sauté, or Keep Warm functions and ensure
- it is in the closed position.
- “SHUT LID” error message appears on display screen.
- The crisping lid is open and needs to be closed for the selected function to start.
- “TURN LID” error message appears on the display screen.
- The pressure lid is not fully installed. Turn the lid clockwise until it clicks for the selected cooking function to start.
- “OPEN VENT” error message appears on display screen.
- When set to Slow Cook or Sear/Sauté, and the unit senses pressure building up, this message indicates the pressure release valve is in the SEAL position.
- Turn the pressure release valve to the VENT position and leave it there for the remainder of the cooking function.
- If you do not turn the pressure release valve to the VENT position within 5 minutes, the program will cancel and the unit will shut off.
- “ADD WTR” error message appears on display screen when using the Steam function.
- The water level is too low. Add more water to the unit for the function to continue.
- “ADD WTR” error message appears on display screen when using the Pressure function.
- Add more liquid to the cooking pot before restarting the pressure cook cycle.
- Make sure the pressure release valve is in the SEAL position.
- Make sure the silicone ring is installed correctly.
- “ERR” message appears.
- The unit is not functioning properly. Please contact Customer Service at 0800 862 0453.
HELPFUL TIPS
- For consistent browning, make sure ingredients are arranged in an even layer on the rack, Cook & Crisp Plate or in the cooking pot with no overlapping. If ingredients are overlapping, make sure to shake them halfway through the set cook time.
- F or smaller ingredients that could fall through the rack, we recommend first wrapping them in a parchment paper or foil pouch.
- When switching from pressure cooking to using the crisping lid, we recommend emptying the pot of any remaining liquid for best crisping results.
- Press and hold down the TIME up or down arrow to get to your desired time faster.
- Use the Keep Warm mode to keep food at a warm, food-safe temperature after cooking. To prevent food from drying out, we recommend keeping the lid closed and using this function just before serving.
- To reheat cold food, use the Air Crisp function.
- T o have your unit build pressure quicker, set it to SEAR/SAUTÉ HIGH. Once ready to pressure cook, press the PRESSURE button and continue as you normally would.
PRODUCT REGISTRATION
TWO (2) YEAR LIMITED GUARANTEE
When you buy a product in Europe as a consumer, you get the benefit of legal
rights relating to the quality of the product (your “statutory rights”). You
can enforce these statutory rights against your retailer. However, at Ninja we
are so confident about the quality of our products (the “Products”) that we
give you a manufacturer’s guarantee of two years. This guarantee only applies
to the Product if it is bought in new and unused condition. These terms and
conditions relate to our guarantees only – your statutory rights as a buyer
are unaffected. Please note that the 2 year guarantee is available in all EU
countries.
The conditions below describe the prerequisites and scope of our guarantees
which are issued by SharkNinja Germany GmbH, c/o Regus Management GmbH,
Excellent Business Center 10. + 11/ Stock, Westhafenplatz 1, 60327 Frankfurt
am Main (Germany) (“us”, “our” or “we”). They do not affect your statutory
rights or the obligations of your retailer
and your contract with them. The same applies if you have purchased the
product directly from Ninja.
Ninja® Guarantees
A household kitchen appliance constitutes a sizeable investment. Your new
machine
needs to work properly for as long as possible. The guarantee it comes with is
an important consideration – and reflects how much confidence the manufacturer
has in its product and manufacturing quality.
Our customer service helpline (0800 000 9063) is open from 9.00am to 6.00pm
Monday – Friday. It’s free to call, and you’ll be put straight through to a
Ninja representative. You’ll also find online support at
www.ninjakitchen.eu.
-
How do I register my guarantee?
You can register your guarantee online within 28 days of purchase. To save time, you’ll need the following information about your machine:-
Model no.
-
Serial Number (only if available)
-
Date of purchase of the Product (receipt or delivery note)
To register online, please visit www.ninjakitchen.eu
IMPORTANT -
The guarantee covers your Product for 2 years starting on the date of purchase.
-
Please keep the receipt at all times. Should you need to use your guarantee we will need the receipt to verify the information supplied to us is correct. The inability to produce a valid receipt will invalidate your guarantee.
-
-
What are the benefits of registering my guarantee?
- When you register your guarantee, you can choose to receive our newsletter containing tips, advice and competitions. Hear the latest news about new Ninja technology and launches. If you register your guarantee online, you’ll get instant confirmation that we’ve received your details.
- For details of our privacy policy please visit www.ninjakitchen.eu
-
How long are our Products guaranteed for?
Our confidence in our design and quality control means that your Product is guaranteed for two years. -
What is covered by the guarantee?
- Repair or replacement (at Ninja’s discretion) of your Product, including all parts and labour in case of any defect in design, materials and workmanship (including transport and shipping costs). Our guarantee is in addition to your legal rights as a consumer.
-
What is not covered by the guarantee?
- Normal wear and tear.
- Accidental damage, faults caused by negligent use or care, misuse, neglect, careless operation or handling of the kitchen appliance which is not in accordance with the Ninja® Instruction Manual supplied with your machine.
- Use of the kitchen appliance for anything other than normal domestic household purposes.
- Use of parts not assembled or installed in accordance with the operating instructions.
- Use of parts and accessories which are not Ninja® Genuine Components.
- Faulty installation (except where installed by Ninja®).
- Repairs or alterations carried out by parties other than Ninja or its agents, Repairs or alterations carried out by parties other than Ninja or its agents, unless you can show that the repairs or alterations carried out by others are not related to the defect for which you exercise the guarantee.
-
What happens when my guarantee runs out?
Ninja does not design products to last for a limited time. We do appreciate that there may be a desire for our customers to want to repair their kitchen appliance after the guarantee has elapsed. In this case please contact our free phone customer service help line and ask about our guarantee program, on 0800 000 9063 . -
Where can I buy genuine Ninja spares and accessories?
Ninja spares and accessories are developed by the same engineers who developed your Ninja kitchen appliance. You’ll find a full range of Ninja spares, replacement parts and accessories for all Ninja machines at www.ninjakitchen.eu
Please remember that using non-Ninja spares may invalidate your manufacturer’s guarantee. However, your statutory rights are unaffected.
THANK YOU
for purchasing the Ninja® Foodi® Mini Multi-Cooker
REGISTER YOUR PURCHASE
ninjakitchen.eu/registerguarantee
Scan QR code using mobile device
RECORD THIS INFORMATION
- Model Number:
- Serial Number:
- Date of Purchase: (Keep receipt)
- Store of Purchase:
TECHNICAL SPECIFICATIONS
- Voltage: 230V~, 50Hz
- Watts: 1460W
- Volume: 4.7L
- Fluid Group: 2
TIP: You can find the model and serial numbers on the QR code label on the back of the unit by the power cord.
This marking indicates this product should not be disposed of with other
household waste.
To prevent possible harm to the environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote the sustainable reuse of
material sources. To return your used device, please use the return and
collection systems or contact
the retailer where this product was purchased. They can take this product for
environmentally safe recycling.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>