JAFANDA JF260 Air Purifiers for Home Large Room User Manual

JF260-Air Purifier User Manual

Please read the manual carefully and keep it for future reference. Thank you for choosing us

JF260 Air Purifiers for Home Large Room

THANK YOU FOR YOUR PURCHASE!
Contact our support team by Email:
[email protected]
Join the jafanda Community on Social Media

@JAFANDA US

| | |
---|---|---|---
https://qr.io/r/b0tkCK| https://qr.io/r/M7cte4| https://qr.io/r/536xCw| https://qr.io/r/MeZVGH

PACKAGE CONTENTS

PRODUCT TECHNICAL PARAMETERS

SPECIFICATIONS

PRODUCT TECHNICAL PARAMETERS

8.66x 8.66 x 14.41 in 22 x 22 x 36.6 cm
Power Adapter (Output)| 24V =1.5A| Package Size| 11.42 x 10.24 x 16.06 in 29 x 26 x 40.8 cm
Rated Power| 32W| N.W.| 6.6Ib/3.0kg
CADR (Clean Air Delivery Rate)| 153CFM (260m 3/h)| G.W.| 8.6113/3.9kg
Noise Level| 23-54dB| Standby Power| < 0.5W
Operating| Temperature: 14°F-104 °F/-10 °C-| Filter life| 3000H
Conditions| 40 °C Humidity: 2046-95% RH| Room Area Served| 238ft 2(5 Times/h)

SAFETY INFORMATION

Read the instructions carefully and follow the following safety precautions when using this product!

Prohibitory sign| Any content with this logo must be avoided to prevent damages to the product and personal safety hazard.
---|---
Warning sign| All contents with this logo should be operated in strict accordance with the requirements, to prevent damages to the product or personal safety hazard.
Caution sign| Any content with this logo requires users’ attention, otherwise it may cause product damage or other losses due to improper operation.

| Do not handle the the power plug when your hands are wet.
---|---
Do not block the air inlet/outlet.
Do not use the unit in places with heavy humidity such as lampblack or bathroom.

| Do not clean or reuse the high-efficiency composite filter.
---|---
Avoid unsupervised use by children, people with perceptual impairment,physical or intellectual disabilities. Make sure a safety person is present to supervise, provide guidance and assist in operating the machine.

|

Remove dust from the air purifier and power plug regularly.

---|---
Use only the power adapter included with this product.
Be careful when cleaning the air purifier. Strong corrosive cleaners may damage the unit’s surface.
Do not approach the device, nor place it on heat sources (such as fireplaces, heaters or places that may come into contact with flammable gases).
Unplug the adapter from the power socket when cleaning the unit or when it’s not in

use. Otherwise, it may lead to electric shock or fire caused by short circuit due to poor insulation.

GETTING TO KNOW YOUR AIR PURIFIER

PRODUCT COMPONENT STRUCTURE AND NAME

1. Base knob
2. Foot pad
3. Composite filter
4. Air outlet
5. Touch – control panel
6. Display screen
7. Ambient lighting
8. Air inlet
9. Power adapter

DISPLAY SCREEN

TOUCH PANEL

the purifier is working; If the icon becomes red, replace the filter screen.
| TIMER| Press this button to realize automatic switching on/off.
| LIGHT| Adjust the ambient light mode.
| AUTO| Press this key to enter automatic mode when working. The fan speed changes from 1 to 4 according to the PM2.5 concentration change.
|

Child lock

|

Press and hold the “ ”+ “ ” for more than 3 seconds in the working state to enter the child lock mode.

PRODUCT FEATURES

A VARIETY OF FUNCTIONS IN ONE

• Efficient purification of PM2.5, smoke, pollen and VOC, pet odor and other pollutants
• 5- speed wind
• Timer
• Filter replacement reminder
• Manual mode/Auto mode/Sleep mode
• Built-in PM2.5 sensor, digital display
• Ambient light

3-Stage Filtration

Pre-filter| Intercepts hair, dander, fibers and particles of all sizes. Can be vacuumed regularly.
---|---
HEPA Filter| H13 HEPA filter for high-efficiency filtration of particles as small as 0.3 micron, such as PM2.5, smoke, pollen, dust and other pollutants.
activated carbon filter| High iodine value activated carbon, effective adsorption of VOC, cigarette odor, lampblack odor, pet odor and other harmful gases.

Note:
activated carbon fiter, HEPA filter and Pre-filters are compounded in the same filter.

OPERATING INSTRUCTIONS

Precautions for use

• All filters are included inside the air purifier.
• Before use, make sure the plastic bag outside the filter is removed and properly installed.

Make the product stand upside down and turn the knob on the base to open position according to the product’s label.| Remove the base.
Remove the filter from the air purifier.| Remove the bags from the filter.

Put the filter without the bag back into the air purifier| Cover the base and tighten the knob to the LOCK position in the marked direction.

GETTING STARTED

1. Plug in the power adapter. When the device is fully charged, the buzzer will emit a “ding” sound.

2. Touch the POWER switch key to start the purifier.

3. When the screen lights up, touch the relevant function keys and the machine will enter the working mode.

USING YOUR AIR PURIFIER

Power ON / OFF
Press “ ”in the standby mode, the machine is ON, and the button is bright white.
Press “ ”again to shut down. The button will become bright red, and enter the standby mode.
Speed
In the working state, press “ ”when the wind speed button is fully lit, the machine will enter the manual mode, to manually set the fan running speed. Press “ ”, and select the machine speed (1-2-3-4-5 cycle).
Light
Touch “ ”to adjust the light brightness. Each touch will change the ambient light mode.
5 modes to choose:
1. 25% brightness
2. 50% brightness
3. 100% brightness
4. shut off button, display screen and ambient light. 10s later, the sleep icon light off
5. lit button and display screen , ambient light stays off
When the touch panel is completely black, press any key to wake up “   ”
Memory function
With the device powered ON, the machine will remember the previous wind speed and light settings each time it is turned on. But when the adapter is plugged back in, it will go back to its default state. Upon start, the machine will default to auto mode.
Child lock
This feature is designed to prevent misuse or accidental manipulation by pets or children. You cannot change the air purifier settings in this mode.
Press and hold the “   ”+ “   ” for more than 3 seconds in the working state to enter the child lock mode. The child lock icon will light up on the display screen. All other buttons will remain OFF.
In the Child Lock mode, press and hold “ ”+ “   ” for more than 3 seconds to exit the child lock function. Then the child lock icon on the display screen will go OFF.
Sleep | filter
When the machine is in SLEEP mode,it will continue to operate silently, with all indicators and ambient lights turned OFF.
Press “   ”in the working state, and it will enter in SLEEP mode. Once in sleep mode, the SLEEP button and icon will remain ON, while all other icons and indicators are OFF. After 10 seconds, the SLEEP button and the SLEEP icon will go OFF, and the wind speed will adjust to the SLEEP mode.
When in SLEEP mode, press any button once to wake up the screen. The SLEEP button and icon will go ON. Press it within 10 seconds to exit the SLEEP mode.
Timer
Press “ ”, the timer button light will turn ON to set the timer. The screen will display the timer’s set time. Each touch, will increase the timer by 1 hour, the value range is 0-12. When the value is 0, the timing can be canceled. Release the button and after 3 seconds the timer will be set. The timer will then start counting down. press “ ”in the working state to set timed shutdown; press “   ”in the standby state to set timed start.
Auto
Press “ ”in the working state to enter the Smart mode. The Auto button will be fully lit, the wind speed will adjust to the PM2.5 concentration values, and the wind speed gear will be set between 1 and 4. The color of the air quality indicator will change according to the PM2.5 concentration values.

PM2.5 Value| Air quality| PM2.5 air quality indicator| Wind speed gear
---|---|---|---
0-12| Excellent| Green| 1
13-35| Good| Blue| 2
36-55| Poor| Yellow| 3
＞ 55| severe| Red| 4

CARE & MAINTENANCE

THE ADAPTER MUST BE UNPLUGGED BEFORE ANY MACHINE MAINTENANCE OPERATION.

1. CLEANING THE BODY OF THE DEVICE (RECOMMENDED ONCE A MONTH):

1. Use a soft cloth to remove stains.
2. Stubborn stains that are not easy to clean can be wiped off with a soft cloth dipped in an appropriate amount of neutral detergent.
   Note: do not use hard objects to scratch the machine shell. When removing the base, follow the instructions to avoid damaging machine parts.

2. FILTER CLEANING AND REPLACEMENT (RECOMMENDED ONCE EVERY 3-6 MONTHS):

1. Filter replacement will be reminded by the built-in program, which can be replaced according to the service life of the machine, or can be replaced in real time by the filter‘s mandatory service life reset function.

• The filter’s life is is about 3000 hours, and the 5 indicator lights will decrease by one every 600 hours. When the filter’s remaining life is lower than 150 hours, the filter button will turn red, and the last indicator light will start flashing (1Hz) to warn the filter screen needs to be replaced.
  When this happens, replace the filter and press the filter button to reset the filter’s life indicator.
  Filter life reset:
  When the filter life is ≥150 hours, touching the filter’s life reset button (3s) will not reset the filter’s life, but only a emit a”ding” sound. When the filter life is <150 hours, the filter’s life reset button will turn red: long press the filter’s life reset button (3s).A “ding” sound will confirm the filter’s life is reset, . The filter’s life reset is completed, and the indicator light of the filter life is fully on.
  Mandatory reset of filter life:
  Within 30 seconds after power-on, in the standby mode, long press the filter reset button (more than 3s). A a “ding” sound will indicate that the filter life is forced to reset, , and the screen will flash 6 times (2 times/second), indicating that the mandatory reset action has been completed. Reboot, and the filter’s life indicator light turn back on.

2. when dust accumulates on the surface of the composite filter, you can use a vacuum cleaner to clean the surface dust, in order to extend the service life of the filter (it is recommended to clean once a month. Do not wash).

• Depending on the machine’s environment, the filter’s life will be different. For example, in places where people smoke and pets are present, the life of the screen is shorter. When the purification effect is not good, replace the filter in time.
• Please dispose the used waste filters according to the relevant regulations of solid waste.

REPLACEMENT FILTERS

1. When the filter button has a red light and the
remaining light of the filter’s life indicator on the
display screen starts flashing, the filter needs to be replaced.| 2.  Touch the POWER button to turn off the machine and unplug the
adapter.| 3.  Turn the product upside down and open
the knob on the base to the open position
according to the product label.

4.  Remove the base.| 5.  Remove the used  filter screen from themachine.| 6. Remove the packing plastic bags of the new filters.

7. Put the new filters into the machine.| 8. Cover the base and tighten the knob to the locking position in the
marked direction.| 9.  Plug in the adapter and touch the POWER button to restart it.

TROUBLESHOOTING

inserted into the socket and whether the POWER ON/OFF button is turned on.
2. Reinstall the base.
Fresh air doesn’t flow smoothly out of the outlet| 1.  The plastic package of the new air filter has not been removed.
2.  The air outlet of the purifier is blocked by foreign objects.| 1. Remove the packing plastic bag first.
2.    Remove foreign bodies.
The machine makes an abnormal sound during operation| 1.  The air intake vent or air exhaust vent is blocked by foreign bodies.
2.  Foreign objects fall into the air duct of the machine.| 1.    Please move the obstructing object.
2.    Remove the foreign body.
After replacing the filter, the filter replacement indicator is still blinking| 1. The fitters reset button was not pressed.| 1. Long press the filter button for more than 3 seconds The filter reset is completed after the “ding”.
Feel the wind weakening| 1. The life of the filter has expired,

or the filter is blocked by hair.

| 1. Use a vacuum cleaner to clean dust

and hair on the surface of the filter; Replace the expired filter screen.

The air purifier gives off a bad smell| 1. The concentration of environmental pollutants may be too high, and the filter screen may suffer early saturation.| 1. The filter needs to be replaced to avoid secondary pollution.

WARRANTY INFORMATION

Jafanda products have a 1-year warranty from the date of purchase. Jafanda guarantees that all products conform to the highest quality materials, workmanship and services from the date of purchase until the end of the warranty period.
Jafanda will replace any product found defective due to manufacturer defects based on qualification. Refunds are available within 30 days of purchase. The limited warranty applies only to air purifiers installed, used and maintained in accordance with this instruction manual.

EXTENDED ONE-YEAR WARRANTY:
Register your product at www.jafanda.com/pages/warranty to extend your warranty for an additional year.
Please fill out all required fields and include your order ID, place of purchase, and purchase date if applicable.

https://qr.io/r/Y3VyPK Better air for you
Jafanda LLC.
1309 Coffeen Avenue STE 4304
Sheridan,Wyoming 82801
[email protected]
EPA Est.NO.98581-CHN-1
Made In China

References

• Warranty Registration – Jafanda

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>