symcode 2D Bluetooth Industrial Barcode Scanner User Manual

symcode 2D Bluetooth Industrial Barcode Scanner

Product Information

Specifications

• Communication Mode:
  • Serial Port:
  • Baud Rate: 9600
  • Parity: None
  • Stop bit: 1
  • USB KBW
  • USB COM
• Trigger Mode:
  • Power Mode
  • Manual Mode
  • Continuous Mode:
  • Interval Time: Adjustable
  • Automatic Induction Mode:
  • Stability of Induction Time: Adjustable
  • Sensitivity Level: Adjustable
  • Host Mode
  • Duration in Scanning: Adjustable
  • Output Interval of The Same Code
  • Quick set for output Interval of The Same Code: Yes/No
• Floodlight and Positioning Lights:
  • Floodlight: On/Off
  • Positioning Lights: On/Off
• Output and Prompt: Yes/No

Product Usage Instructions

Factory Default Configuration
To restore the product to its factory default configuration, follow these steps:

1. Step 1: [Detailed instructions for Factory Default Configuration]

Save Current Configuration as Default
To save the current configuration as the default, follow these steps:

1. Step 1: [Detailed instructions for saving current configuration]

Default Configuration

The default configuration of the product is as follows:

1. Step 1: [Detailed default configuration information]

Parameter Code
The parameter code for the product is:

1. Step 1: [Detailed parameter code information]

Product Information

The product information is as follows:

1. Step 1: [Detailed product information]

Software Development Manual

Sumax

Software Development Manual

Basic information
1. Factory Default Configuration Communication ModeUSB Trigger ModeManual mode TerminatorCR
Factory Default Configuration 2. Save current configuration as default
The user can set the required configuration , and then scan the following barcodeSave current configuration as default
Save current configuration as default 3. Default Configuration
When the user has set the default settings, scan the following barcode to restore the original set of customer configurations
Default Configuration
1

4. Parameter code
*open Parameter code 5. Product information

close Parameter code

Communication Mode
1. Serial Port Using Serial Port read moudle and the host devices must match exactly in ommunication parameter configuration, to ensure smooth communication and content are correct, Serial Port is configured to: 9600 baud, 8 bits of data, no parity, 1 stop bit

TTL 232 1Baud Rate The default baud rate is 9,600
1200bps
2

2400bps

4800bps 19200bps 57600bps
2parity Odd

• None

• 9600bps 38400bps 115200bps
  Even 3

3Stop bit
*1 Stop Bit 2. USB KBW
3. USB COM

2 Stop Bits USB KBW USB COM

4

Trigger Mode
1. Power Mode This parameter determines the power mode of the engine. In Low Power mode, the scan engine enters into a low power
consumption Sleep power state whenever possible (provided all WAKEUP commands were released)
In Continuous Power mode, the scan engine remains in the Awake state after each decode attempt
The Sleep and Awake commandscan be used to change the power state in either the Low Power mode or the Continuous Power mode.

Continuous Power

Low Power

2. Manual mode
1Key Holding
Press the button to trigger the reading, release the button to end the reading. Reading success or reading time over a single reading time will end the reading

*Manual mode-Key Holding 2Single Key Trigger
Detects the change of the key level (Maintain 30ms, depending on the product )to start reading, and then detects the change of the key level (Maintain 30ms, depending on the product )again to end reading. Reading success or reading time over a single reading time will end the reading.
5

Manual mode-Single Key Trigger
3. Continuous Mode
The reading engine performs continuous work. Reading success or reading time over a single reading time will end the reading. More than
the specified time will automatically trigger the next reading
Continuous Mode 1Interval Time
The interval time between two readings in continuous mode. Regardless of the last success or failure to read, more than the specified time will automatically trigger the next reading.
Default: 500ms,unit: 100ms,range: 0-9900ms To set a Interval Time, scan the bar code below. Next scan two Numeric Bar Codes in appendix that correspond to the desired time-out. Single digit values must have a leading zero. For example, to set a time-out of 0.5 seconds, scan the bar code below, then scan the “0” and “5” bar codes. To change the selection or cancel an incorrect entry, scan Cancel
Interval Time (Default: 500ms.) 4. Automatic Induction Mode In automatic induction mode, the scan engine detects the brightness of the surroundings. Trigger reading when the brightness changes.
6

Reading success or reading time over a single reading time will end the reading. Regardless of the last success or failure to read, re-enter the detection of the surrounding environment brightness.
Automatic Induction Mode 1Stability of Induction Time
Stability of induction time, Default: 500ms, unit:100ms, range: 0-9900ms
For example: Set stability of induction time is 200ms Scan stability of induction time setting code,then scan Numeric Bar Codes 0 and 2 Set stability of induction time is 1500ms Scan stability of induction time setting code,then scan Numeric Bar Codes 1 and 5
Stability of Induction Time 2Sensitivity Level
There are three levels of sensitivity to choose from , Default: 500ms
*High
7

Middle

Low 5. Host mode
Through the command to trigger the scan engine to read, also through the command to trigger the scan engine to end reading. Reading success or reading time over a single reading time will end the reading.
Host mode
6. Duration in Scanning This parameter sets the maximum time decode processing continues during a scan attempt. It is programmable in 0.1 second increments from 0.50 to 25.5 seconds. To set a duration in scanning, scan the bar code below. Next scan three Numeric Bar Codes in appendix that correspond to the desired on time. Single digit numbers must have a leading zero. For example, to set an on time of 0.5 seconds, scan the bar code below, then scan the “0”, “0” and “5” bar codes; to set an on time of 10.5 seconds, scan the bar code below, then scan the “1”, “0” and “5” bar codes. To change the selection or cancel an incorrect entry, scan Cancel
8

Duration in Scanning(Default: 3.0 sec.)
7. Output Interval of The Same Code To avoid reading the same barcode multiple times in continuous mode and automatic induction mode, set the scan engine to allow reading the same barcode after a delay. Output interval of the same code is to refuse to read the same barcode within the set length of time. Default: 500ms,unit:100ms,range: 0-9900ms To set output interval of the same code, scan the bar code below. Next scan two Numeric Bar Codes in appendix that correspond to the desired time-out. Single digit values must have a leading zero. For example, to set a time-out of 0.5 seconds, scan the bar code below, then scan the “0” and “5” bar codes. To change the selection or cancel an incorrect entry, scan Cancel in appendix.

Output Interval of The Same Code 8. Quick set for output Interval of The Same Code

None

delay 1s

delay 3s

Delay 5s

delay 7s 9

delay forever

Floodlight and Positioning lights
1. Floodlight Lighting when Read
Always Lighting
Always Close 2. Positioning lights Lighting when Read
Always Lighting 10

Always Close
Output and prompt
1. Keyboard 1 Country/Language Keyboard * American Keyboard
Finland
11

Belgium France

Germany Sweden Denmark

Italy England
Norway 12

Spain Turkey_F Japan

Portugal Turkey_Q
Russia 13

Czech Ukraine
Greece

Thailand BrazilABNT2
Hungary 14

Netherlands Romania (standard)

Poland214 Slovakia

Multi-national keyboard
2 Keyboard type Enable virtual keyboard, you can output the correct data in any
keyboard language mode.When using virtual keyboard, you must ensure that the keypad keys are valid

*StandardKeyboard

Virtual Keyboard 15

3 Time interval that keyboard outputs character Time interval that keyboard outputs character,
0-1000ms,unit: 5ms,default: 5ms

range:

0ms

10ms

4 Control characters in ASCII output mode select Control characters in ASCII (0x00-0x20) output mode select. output function keys: control characters are used as custom
function keys, the function is detailed in appendix 4 output Ctrl key combination (this function is used with the
prefix) : CTRL key combination mode output control character, detailed function is detailed in appendix 4
ALT mode output control character: support full control character output in Chinese environment, specific Reference Standard ASCII table
output Enter, DownArrow: Shielding other control characters, only output: 0x07 output Enter, 0x0A output DownArrow, 0x0D output Enter.

output function keys

output Ctrl key combination 16

ALT mode output control character

Output EnterDownArrow 2. Prompt sound
1 type of Buzzer

*Passive Buzzer 2 Mute

Active Buzzer

Open 3 Beeper Volume

• Close

• High 17

Low 4 Beep After Good Decode Open
5 Boot prompt open
18

Middle Close Close

6 Setup Code Prompt

*open

Close
3. LED After Good Decode To enable or disable LED after good decode, scan the appropriate
bar code below

Disable 4. operation Mode of decode led

*enable

*the indicator led is always on

*the indicator led is always off 19

5. Transmit “No Read” Message Enable this option to transmit “NR” if a symbol does not decode
during the timeout period or before the trigger is released. Any enabled prefix or suffixes are appended around this message.
When disabled, and a symbol cannot be decoded, no message is sent to the host.

*Disable No Read

Enable No Read

6. Letter case conversion For example If the Barcode content is ab123dE if set to ” all uppercase “the output isAB123DEif set to “all lowercase”, the output isab123de if set to ” Case Inversion”, the output isAB123De
Default: Normal Letter Case

• Normal Letter Case

all uppercase

all lowercase 20

7. Output Character Set Type 0: Primitive Type 1:GBK(GB2312) 2: UTF8
Primitive Type
Unicode 8. Input Character Set Type
*AUTO

Case Inversion *GBK
GBK(GB2312)

21

UTF8

ASCII

Japanese

DEC MULTI-COUNTRY CHARACTER SET (MCS)

Japanese single byte
Data editor
1. Code ID The user can identify different barcode types by CODE ID, and CODE ID USES a character to identify them,detail in Appendix 3
*Disable send Code ID
Enable send Code ID 22

2. Terminator Add character format: Decode Data+Terminator.
*NONE CR LF
CR TAB
CRCR CR LF CR LF
23

3. Terminator conversion LF(n) and CR LF (rn) both convert CR (r)

*disable

able

4. Add multiple Prefixes/suffixes Prefixes
(1) Scan following barcode”set multiple prefixes”

set multiple prefixes (2) Next scan four Numeric Bar Codes in appendix,Scan the Numeric Bar
Codes in turn, and set the successful prompt once every four times (3) Scan following barcode”Complete setup multiple Prefixes/suffixes”

Complete setup multiple Prefixes/suffixes suffixes
1Scan following barcode”set multiple suffixes”

set multiple Suffix 24

2Next scan four Numeric Bar Codes in appendix,Scan the Numeric Bar Codes in turn, and set the successful prompt once every four times 3Scan following barcode”Complete setup multiple Prefixes/suffixes”
Complete setup multiple Prefixes/suffixes Prefixes/suffixes take effect
*Output Decoding Data Only
Prefixes+data
Data+suffixes
Prefixes+data+suffixes 25

5. Add Prefix and suffix base on bar code type (non-generic version) 1Add Prefix
Sets the prefix based on the bar code type Set multiple prefixes based on the bar code type, step 1: Scan the Code First, step 2: Select the Bar Code type, according to the bar code type supported by “Appendix 5” and “Appendix 4”, scan the index of the corresponding hexadecimal value, such as QR Code type 0XF1, 0XF1 Hexadecimal to decimal is 241the scan valve is 1000+241=1241then scan the 1,2,4,1 Numeric Bar Codes to select the type of Bar Code; Step 3: Scan the required prefix, such as the need to set the number “1” scan 1049(0x31) ; Step 4: Scan”complete the setting of multiple prefix”
complete the setting of multiple prefix 2Add Suffix Step refers to “add prefix bar code by type. ”
Sets the suffix based on the bar code type
26

3remove prefixes based on Bar code type
remove prefixes based on Bar code type step 1: Scan the Code First step 2: Select the Bar Code type, according to the bar code type supported by “Appendix 5” and “Appendix 4”, scan the index of the corresponding hexadecimal value, such as QR Code type 0XF1, 0XF1 Hexadecimal to decimal is 241the scan valve is 1000+241=1241then scan the 1,2,4,1 Numeric Bar Codes to select the type of Bar Code Notes: if you want remove all type of barcodeScan”125 5″0xFF 4remove suffixes based on Bar code type Step refers to “remove prefix bar code by type. ”
Remove suffixes based on Bar code type 5prefix and suffixes Switch settingData format
No prefix and suffix (raw data)
Output prefix (prefix+data) 27

Output suffix (data + suffix)

Output prefix and suffix (prefix + data + suffix) 6. Hide data (1) Hide Head Data

*Disable

enable

Set Hidden Number range 1-255. Scan the following barcode,Next scan three Numeric
Bar Codes in appendix. For example, if you need to hide 16 characters,
scan three Numeric Bar Codes in turn: 0 1 6

Hide Head Data-head (2) Hide intermediate data

*Disable

enable 28

Sets the start position of hidden intermediate data Sets the start position of hidden intermediate data, range
1-255.Scan the following barcode,Next scan three Numeric Bar Codes in appendix, for example, to hide the data after the third character(the fourth begins to hide),scan three Numeric Bar Codes in turn: 0 0 3

start position of hidden intermediate data Set Hidden Number
range 1-255. Scan the following barcode,Next scan three Numeric
Bar Codes in appendix. For example, if you need to hide 16 characters,
scan three Numeric Bar Codes in turn: 0 1 6

(3) Hide tail data

Set Hidden Number-intermediate

*Disable

enable

Set Hidden Number range 1-255. Scan the following barcode,Next scan three Numeric
Bar Codes in appendix. For example, if you need to hide 16 characters,
scan three Numeric Bar Codes in turn: 0 1 6

29

Set Hidden Number-tail 7. Hide header and footer data base on bar code type
(non-generic version) 1Hide header data
step 1: Scan the Code First; step 2: Select the Bar Code type, according to the bar code type supported by “Appendix 5” and “Appendix 4″, scan the index of the corresponding hexadecimal value, such as QR Code type 0XF1, 0XF1 Hexadecimal to decimal is 241the scan valve is 1000+241=1241then scan the 1,2,4,1 Numeric Bar Codes to select the type of Bar Code; Step 3: Hidden Length (4-digit decimal value).if you want hide 5 bit header data,scan 0,0,0,5 Numeric Bar Codes; Notes: Supports setting all bar code types at once , Scan”12 55″0xFF
Hide header data base on barcode type 2able/disable hide header data
*disable hide header data
30

able hide header data 3Hide footer data base on bar code type
Step refers to ” Hide header data base on barcode type”
Hide footer data base on bar code type 4able/disable hide footer data
*disable hide footer data
able hide footer data 8. Insert customize data 1able /disable insert customize data Supports customize data insertion anywhere in the Barcode, up to 10 bytes
31

*disable
able 2set the location where the data is inserted Depending on where you want to insert, scan the corresponding value (4 digit Numeric Bar Codes) , such as set after the third character, you need to scan four Numeric Bar Codes “0” , “0” , “0” , “3” . If set to 0, the header is inserted into the decoded data. If the setting is larger than the length of the decoded data, the end of the decoded data is inserted by default. The range of supported insertion positions is 0-5000.
set the location where the data is inserted 3set the inserted data
Set Insert customize data, such as need to set the character “QR” (0x51,0X52) , then scan two consecutive sets of Numeric Bar Codes 1081(1000 + 0x51) , 1082(1000 + 0x52) .
32

set the inserted data
4exit settings customize data Maximum support for 10 bitye customize data, can be set
continuously, over 10 bitye automatic exit settings. Complete ahead of time: scan the “exit settings customize data ” setting code, exit settings and save the current set of data.

9. STX&ETX

exit settings customize data

*Disable

STX

ETX

STX+ETX

10. Character Replace The feature can replace any character in Barcode data with another
character, and supports either 1:1 or 1: n replacement, such as A–BA–BC A–BCD
Operating instructions:

33

1Sets the data to be replaced
Sets the data to be replaced For example:Group Separator, According to the Character Equivalents,detali in Appendix 4,the scan value is 1029,scan the Numeric Bar Code1,0,2,9 one by one 2Set the Replacement data
Set the Replacement data For example: symbol } According to the Character Equivalents,detali in Appendix 4,the scan value is 1125,scan the Numeric Bar Code1,1,2,5 one by one 3complete setup
complete setup 4Enable / disable data replacement
Enable
34

disable

Code Enable/Disable
1. All Barcode Switch
enable 2. 1d code master switch
enable 3. 2d code master switch
35

disable *disable

enable

*disable

4. Reverse code reading Mainly for the 1D code switch, the 2D code is recommended to open
separately,2D code has a separate switch

enable
5. Read Multiple Barcodes at once 1 Must read Multiple Barcodes at once

*disable

2

able number of barcodes read at one time

disable

1

2

6. UPC-A
3 UPC-A enable/disable

*enable

3 disable

36

4 UPC-A Preamble

No Preamble

*System Character

System Character & Country Code 5 UPC-A check bit

Do not transmit UPC-A check bit
7. UPC-A additional code
(1) UPC-A 2 additional code

*transmit UPC-A check bit

enable

*disable

37

(2) UPC-A 5 additional code

Enable (3) UPC-A Must read additional code

*disable

Enable
8. UPC-E
1 UPC-E enable/disable

*disable

*enable 2 UPC-E Preamble

disable

No Preamble

*System Character

System Character & Country Code

38

3 UPC-E check bit

Do not transmit UPC-E check bit bit 9. UPC-E additional code (1) UPC-E 2 additional code
enable (2) UPC-E 5 additional code
Enable (3) UPC-E Must read additional code
Enable 10. UPC-E transfer UPC-A

transmit UPC-E check disable disable disable

Enable

*disable 39

11. UPC-A transfer EAN-13
Enable 12. UPC-E1
enable 13. EAN-8 1 EAN-8 able/disable
*enable 2 EAN-8 check bit
Do not transmit EAN-8 check bit 14. EAN-8 additional code (1) EAN-8 2 additional code

disable disable disable transmit EAN-8 check bit

Enable

*disable 40

(2) EAN-8 5 additional code

Enable (3) EAN-8 Must read additional code

*disable

Enable 15. EAN-13 1 EAN-13 enable/disable
*enable 2 EAN-13 check bit

disable disable

Do not transmit EAN-13 check bit
16. Bookland EAN (ISBN) ISBN disable is treated as EAN13

*transmit EAN-13 check bit

able ISBN

*disable ISBN 41

17. ISSN ISSN disable is treated as EAN13
able ISSN 18. EAN-13 additional code
(1) EAN-13 2 additional code

*disable ISSN

Enable (2) EAN-13 5 additional code
enable (3) EAN-13 Must read additional code
Enable 19. CODE 128

• Enable 42

disable disable *disable
Disable

20. GS1-128

• enable
  21. Interleaved 2 of 5
  (1) I 2 of 5 enable/disable

disable

*enable

disable

(2) Set Lengths for Interleaved 2 of 5

For example, to decode Interleaved 2 of 5 symbols containing

between 4 and 12 characters

first scan Interleaved 2 of 5-Length Within Range, then scan 0, 4,

1 and 2 (single digit numbers must be preceded by a leading zero). Numeric Bar Codes is in appendix. To change the selection or cancel

an incorrect entry, scan Cancel

I 2 of 5 – Length Within Range (3) I 2 of 5 Check Digit Verification

I 2 of 5 – Any Length

43

enable (4) Transmit I 2 of 5 Check Digit

*disable

enable
22. Matrix 2 of 5
(1) Matrix 2 of 5 enable/disable

*disable

enable

*disable

(2) Set Lengths for Matrix 25

For example, to decode Matrix 25 symbols containing between 4

and 12 characters

first scan Matrix 25 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must be preceded by a leading zero). Numeric Bar Codes is in appendix. To change the selection or cancel an
incorrect entry, scan Cancel in appendix.

Matrix 25 – Length Within Range
(3) Matrix 25 Check bit Verification

Matrix 25 – Any Length

Enable

*disable 44

(4) transmit Matrix 2 of 5 check bit

Enable
23. Industrial 2 of 5
(1) Industrial 2 of 5 enable/disable

*disable

enable

*disable

(2) Set Lengths for Industrial 2 of 5
For example, to decode Industrial 2 of 5 containing between 4 and 12 characters
first scan Industrial 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must be preceded by a leading zero). Numeric Bar Codes is in appendix. To change the selection or cancel an incorrect entry, scan Cancel

D 2 of 5 – Length Within Range
24. Standard 2 of 5
(1) Standard 2 of 5 enable/disable

D 2 of 5 – Any Length

enable

*disable 45

(2) Set Lengths for Standard 2 of 5
For example, to decode Standard 2 of 5 containing between 4 and 12 characters
first scan Standard 2 of 5 Length Within Range, then scan 0, 4, 1 and 2 (single digit numbers must be preceded by a leading zero). Numeric Bar Codes is in appendix. To change the selection or cancel an incorrect entry, scan Cancel

Standard 25 – Length Within Range
25. Code 39
(1) code39 enable/disable

Standard 25 – Any Length

*enable (2) Code39 Length

disable

Any Length code39
(3) Code 39 Check bit Verification

enable

*disable 46

(4) transmit Code39 check bit Transmit the check bit, the check bit Verification function should
enabled

transmit
(5) Transmit Code 39 start and ending symbol

*do not transmit

*disable 26. Code 39 Full ASCII

enable

Enable
27. Code 32
(1) code32 enable/disable

• Disable

Enable (2) code32 add prefix A

• Disable

Enable

• disable 47

28. Code 93
(1) Code93 enable/disable

Enable (2) code93 lenght

• disable

Any lenght can read
29. Code 11
1 code11 enable/disable

Enable 2 code11 lenght

• disable

Any lenght can read 3 Code 11 Check bit Verification

enable

one check bit 48

two check bit

4 transmit check bit

enable 30. Codabar 1 Codabar enable/disable
enable 2 Codabar lenght

• disable * disable

Any lenght can read 3 Start Character and Terminator The start character and terminator are allowed to be one of the four characters of “A”, “B” “C” “D”.The terminator is also allowed to be one of the four characters of “T”, “N”, “*”, “E”.

*ABCD/ABCD
4 Transmit Start Character and Terminator

ABCD/TN*E

Don not transmit

*transmit 49

31. MSI
1 MSI enable/disable
Enable 2 MSI lenght

*disable

32. GS1-Databar

Any lenght can read

Enable 33. GS1 composite code

• disable

Enable 34. QR Code (1) QR code enable/disable

• enable 50

• disable
  disable

(2) QR code reverse
only read Normal code (3) QR Mirror
disable 35. Data Matrix (1) Data Matrix enable/disable

• enable (2) Read reverse Data Matrix
  *only read Normal code

Read Normal/reverse code enable disable
Only Read reverse code

Read Normal/reverse code 51

1 Data Matrix Mirror
*disable 36. PDF 417

• enable 37. Aztec code
  enable 38. Maxi code
  enable 39. Hanxin code
  enable 52

enable disable disable disable *disable

40. Brazilian bank code enable

*disable

Appendix 1numbered bar code
For parameters requiring specific numeric values, scan the appropriately numbered bar code(s).

0

1

2

3

4

5

53

6

7

8

9

Appendix 2CANCEL
To change the selection or cancel an incorrect entry, scan the bar code below.

Cancel

Appendix 3Code ID

Code character

Code symbol

A

UPC-A, UPC-E, EAN-8, EAN-13

B

Code 39, Code 32

C

Codabar

D

Code 128, GS1-128,ISBT 128

E

Code 93

F

Interleaved 2 of 5/ITF, ITF14

G

Industrial 2 of 5, Standard 2 of 5

H

CODE11

54

J

MSI, MSI/Plessey

R

GS1 DataBar-14, GS1 DataBar Limited,

GS1 DataBar Expanded, RSS

V

Matrix 25

r

PDF417

u

DataMatrix(DM)

q

QR

a

Aztec Code

x

Maxi Code

c

HanXin

Appendix 4Character Equivalents

Scan Value

HEX Value

Keyboard Function Key

1000

00h

Null

1001

01h

Keypad Enter

1002

02h

Caps lock

1003

03h

Right Arrow

1004

04h

Up Arrow

1005

05h

Null

1006

06h

Null

1007

07h

Enter

1008

08h

Left Arrow

55

Keyboard Ctrl Combination Key CTRL 2 CTRL A CTRL B CTRL C CTRL D CTRL E CTRL F CTRL G CTRL H

1009

09h

1010

0Ah

1011

0Bh

1012

0Ch

1013

0Dh

1014

0Eh

1015

0Fh

1016

10h

1017

11h

1018

12h

1019

13h

1020

14h

1021

15h

1022

16h

1023

17h

1024

18h

1025

19h

1026

1Ah

1027

1Bh

1028

1Ch

1029

1Dh

1030

1Eh

1031

1Fh

1032

20h

1033

21h

1034

22h

1035

23h

1036

24h

1037

25h

1038

26h

1039

27h

1040

28h

1041

29h

Horizontal Tab Down Arrow Vertical Tab Backspace Enter Insert Esc F11 Home Print Screen Delete tab+shift F12 F1 F2 F3 F4 F5 F6 F7 F8 F9 F10
56

CTRL I CTRL J CTRL K CTRL L CTRL M CTRL N CTRL O CTRL P CTRL Q CTRL R CTRL S CTRL T CTRL U CTRL V CTRL W CTRL X CTRL Y CTRL Z CTRL [ CTRL CTRL ] CTRL 6 CTRL Space ! # $ % & ( )

1042

2Ah

1043

2Bh

1044

2Ch

1045

2Dh

1046

2Eh

1047

2Fh

1048

30h

1049

31h

1050

32h

1051

33h

1052

34h

1053

35h

1054

36h

1055

37h

1056

38h

1057

39h

1058

3Ah

1059

3Bh

1060

3Ch

1061

3Dh

1062

3Eh

1063

3Fh

1064

40h

1065

41h

1066

42h

1067

43h

1068

44h

1069

45h

1070

46h

1071

47h

1072

48h

1073

49h

1074

4Ah

• • , . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J
    57

1075

4Bh

1076

4Ch

1077

4Dh

1078

4Eh

1079

4Fh

1080

50h

1081

51h

1082

52h

1083

53h

1084

54h

1085

55h

1086

56h

1087

57h

1088

58h

1089

59h

1090

5Ah

1091

5Bh

1092

5Ch

1093

5Dh

1094

5Eh

1095

5Fh

1096

60h

1097

61h

1098

62h

1099

63h

1100

64h

1101

65h

1102

66h

1103

67h

1104

68h

1105

69h

1106

6Ah

1107

6Bh

K L M N O P Q R S T U V W X Y Z [ ] ^ _ ` a b c d e f g h i j k
58

1108

6Ch

l

1109

6Dh

m

1110

6Eh

n

1111

6Fh

o

1112

70h

p

1113

71h

q

1114

72h

r

1115

73h

s

1116

74h

t

1117

75h

u

1118

76h

v

1119

77h

w

1120

78h

x

1121

79h

y

1122

7Ah

z

1123

7Bh

{

1124

7Ch

|

1125

7Dh

}

1126

7Eh

~

1127

7Fh

Undefined

Appendix 5Supported bar code types

Not Applicable

0x00

EAN 13 with 5 Supps.

0x8B

Code 39

0x01

EAN 13

0x0B

Codabar

0x02

EAN 13 with 2 Supps.

0x4B

Code 128, Setup128 0x03

EAN 13 with 5 Supps.

0x8B

Discrete 2 of 5

0x04

MSI

0x0E

IATA 2 of 5

0x05

GS1-128

0x0F

Interleaved 2 of 5 0x06

UPC E1

0x10

Code 93

0x07

UPC E1 with 2 Supps.

0x50

UPC A

0x08

UPC E1 with 5 Supps.

0x90

UPC A with 2 Supps. 0x48

Trioptic Code 39

0x15

59

UPC A with 5 Supps. 0x88

Bookland EAN

0x16

UPC E0

0x09

Coupon Code

0x17

UPC E0 with 2 Supps. 0x49

GS1 DataBar-14

0x30

UPC E0 with 5 Supps. 0x89

GS1 DataBar Limited

0x31

EAN 8

0x0A

GS1 DataBar Expanded 0x32

EAN 8 with 2 Supps 0x4A

Code11

0x0C

EAN 8 with 5 Supps 0x8A

PDF417

0xF0

QR

0xF1

Data Matrix(DM)

0xF2

Aztec Code

0xF3

Maxi Code

0xF4

Veri Code

0xF5

Han Xin

0xF7

AIM128

0xA2

ISSN

0xA3

PLESSEY

0xA4

Appendix 6 Serial instruction

6-1

CMD_ACK

04 D0 04 00 FF 28

CMD_NAK

RESEND:05 D1 04 00 01 FF 25 BAD_CONTEXT:05 D1 04 00 02 FF 24 DENIED:05 D1 04 00 06 FF 20

DECODE_DATA LED_OFF

None 05 E8 04 00 01 FF 0E

LED_ON

05 E7 04 00 01 FF 0F

PARAM_DEFAULTS PARAM_REQUEST PARAM_SEND

04 C8 04 00 FF 30

REQUEST_REVISION REPLY_REVISION

04 A3 04 00 FF 55 None

SCAN_DISABLE

04 EA 04 00 FF 0E

60

SCAN_ENABLE SLEEP START_DECODE STOP_DECODE WAKEUP RESET

04 E9 04 00 FF 0F 04 EB 04 00 FF 0D 04 E4 04 00 FF 14 04 E5 04 00 FF 13 04 FA 04 00 FE FE 05 E6 04 00 00 FF 11 05 E6 04 00 01 FF 10

6-2

()

:08 C6 04 08 00 F2 FF 00 FD 35 :08 C6 04 08 00 F2 FF 03 FD 32 4s07 C6 04 08 00 88 28 FE 77 10s:07 C6 04 08 00 88 64 FE 3B 08 C6 04 08 00 F2 CF 00 FD 65 3s 08 C6 04 08 00 F2 CF 03 FD 62 5s 08 C6 04 08 00 F2 CF 05 FD 60 10s08 C6 04 08 00 F2 CF 0A FD 5B 15s08 C6 04 08 00 F2 CF 0B FD 5A 20s08 C6 04 08 00 F2 CF 0C FD 59 30s08 C6 04 08 00 F2 CF 0D FD 58 60s 08 C6 04 08 00 F2 CF 0E FD 57 07 C6 04 08 00 80 00 FE A7 07 C6 04 08 00 80 01 FE A6 07 C6 04 08 00 8A 00 FE 9D 07 C6 04 08 00 8A 02 FE 9B 07 C6 04 08 00 8A 04 FE 99 : 07 C6 04 08 00 8A 09 FE 94 07 C6 04 08 00 8A 08 FE 95
0s:07 C6 04 08 00 89 00 FE 9E 0.5s: 07 C6 04 08 00 89 05 FE 99 3s07 C6 04 08 00 89 1E FE 80

61

“”

07 C6 04 08 00 8C 02 FE 99 : 07 C6 04 08 00 8C 01 FE 9A : 07 C6 04 08 00 8C 00 FE 9B *: 08 C6 04 08 00 F2 D8 00 FD 5C : 08 C6 04 08 00 F2 D8 01 FD 5B 07 C6 04 08 00 38 01 FE EE 07 C6 04 08 00 38 00 FE EF :08 C6 04 08 00 F2 05 00 FE 2F CR LF :08 C6 04 08 00 F2 05 01 FE 2E CR :08 C6 04 08 00 F2 05 02 FE 2D TAB : 08 C6 04 08 00 F2 05 03 FE 2C CR CR 08 C6 04 08 00 F2 05 04 FE 2B CR LF CR LF 08 C6 04 08 00 F2 05 05 FE 2A : 08 C6 04 08 00 F2 0B 00 FE 29 : 08 C6 04 08 00 F2 0B 01 FE 28 : 08 C6 04 08 00 F2 CB 00 FD 69 : 08 C6 04 08 00 F2 CB 01 FD 68 : 08 C6 04 08 00 F2 0C 00 FE 28 : 08 C6 04 08 00 F2 0C 01 FE 27 : 08 C6 04 08 00 F2 0D 00 FE 27 : 08 C6 04 08 00 F2 0D 01 FE 26 : 08 C6 04 08 00 F2 0E 00 FE 26 : 08 C6 04 08 00 F2 0E 01 FE 25 07 C6 04 08 00 5E 01 FE C8 07 C6 04 08 00 5E 00 FE C9 07 C6 04 08 00 EC 01 FE 3A 07 C6 04 08 00 EC 00 FE 3B 08 C6 04 08 00 F1 71 01 FD C3 08 C6 04 08 00 F1 71 00 FD C4
62

/ 1 2

: 08 C6 04 08 00 F2 08 00 FE 2C : 08 C6 04 08 00 F2 08 01 FE 2B : 08 C6 04 08 00 F2 AA 00 FD 8A : 08 C6 04 08 00 F2 AA 01 FD 89 31 32 33 0B C6 04 08 00 69 31 68 32 6A 33 FD 52 :0x00 0x0D 0x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
63

PS2

07 C6 04 08 00 9E 04 FE 85 07 C6 04 08 00 9F 01 FE 87 07 C6 04 08 00 9F 00 FE 88 07 C6 04 08 00 EE 00 FE 39 07 C6 04 08 00 EE 01 FE 38
0.1s: 07 C6 04 08 00 9B 01 FE 8B : 07 C6 04 08 00 9D 01 FE 89 : 07 C6 04 08 00 9D 02 FE 88 1s: 07 C6 04 08 00 6E 01 FE B8 500ms:07 C6 04 08 00 EF 32 FE 06 200ms:07 C6 04 08 00 EF 14 FE 24 50ms: 07 C6 04 08 00 EF 05 FE 33 :08 C6 04 08 00 F2 01 00 FE 33 USB KBW:08 C6 04 08 00 F2 01 01 FE 32 USB : 08 C6 04 08 00 F2 01 02 FE 31 HID POS:08 C6 04 08 00 F2 01 0E FE 25 AUTO: 08 C6 04 08 00 F2 A6 00 FD 8E PS2: 08 C6 04 08 00 F2 A6 01 FD 8D :08 C6 04 08 00 F2 02 00 FE 32 :08 C6 04 08 00 F2 02 01 FE 31 : 08 C6 04 08 00 F2 02 02 FE 30 :08 C6 04 08 00 F2 03 00 FE 31 :08 C6 04 08 00 F2 03 01 FE 30 : 08 C6 04 08 00 F2 03 02 FE 2F *: 08 C6 04 08 00 F2 B8 00 FD 7C : 08 C6 04 08 00 F2 B8 01 FD 7B :08 C6 04 08 00 F2 04 00 FE 30 :08 C6 04 08 00 F2 04 01 FE 2F :08 C6 04 08 00 F2 04 02 FE 2E :08 C6 04 08 00 F2 04 03 FE 2D 00:08 C6 04 08 00 F3 01 00 FE 32
64

1D /

01:08 C6 04 08 00 F3 01 01 FE 31 05:08 C6 04 08 00 F3 01 05 FE 2D 10:08 C6 04 08 00 F3 01 0A FE 28 15:08 C6 04 08 00 F3 01 0F FE 23 500ms:08 C6 04 08 00 F3 02 05 FE 2C 1000ms:08 C6 04 08 00 F3 02 0A FE 27 300ms: 08 C6 04 08 00 F3 02 03 FE 2E 08 C6 04 08 00 F2 91 00 FD A3 08 C6 04 08 00 F2 91 01 FD A2 : 08 C6 04 08 00 F2 06 00 FE 2E GBK:08 C6 04 08 00 F2 06 01 FE 2D UNICODE:08 C6 04 08 00 F2 06 02 FE 2C : 08 C6 04 08 00 F6 01 01 FE 2E : 08 C6 04 08 00 F6 01 02 FE 2D ABNT208 C6 04 08 00 F6 01 03 FE 2C : 08 C6 04 08 00 F6 01 06 FE 29 : 08 C6 04 08 00 F6 01 07 FE 28 : 08 C6 04 08 00 F6 01 08 FE 27 : 08 C6 04 08 00 F6 01 09 FE 26 08 C6 04 08 00 F6 01 0A FE 25 08 C6 04 08 00 F6 01 0B FE 24 : 08 C6 04 08 00 F6 01 0D FE 22 08 C6 04 08 00 F6 01 0F FE 20 : 08 C6 04 08 00 F6 01 10 FE 1F 08 C6 04 08 00 F6 01 11 FE 1E : 08 C6 04 08 00 F6 01 12 FE 1D 08 C6 04 08 00 F6 01 13 FE 1C : 08 C6 04 08 00 F6 01 14 FE 1B : 08 C6 04 08 00 F6 01 15 FE 1A : 08 C6 04 08 00 F6 01 16 FE 19 : 08 C6 04 08 00 F6 01 17 FE 18
65

STX ETX

_F: 08 C6 04 08 00 F6 01 19 FE 16 _Q: 08 C6 04 08 00 F6 01 1A FE 15 : 08 C6 04 08 00 F6 01 1B FE 14 : 08 C6 04 08 00 F6 01 1C FE 13 : 08 C6 04 08 00 F6 01 1D FE 12 Kedmanee08 C6 04 08 00 F6 01 1E FE 11 08 C6 04 08 00 F6 01 1F FE 10 _10108 C6 04 08 00 F6 01 20 FE 0F 08 C6 04 08 00 F6 01 21 FE 0E 08 C6 04 08 00 F6 01 22 FE 0D 08 C6 04 08 00 F6 01 23 FE 0C 0ms: 08 C6 04 08 00 F3 04 00 FE 2F 5ms: 08 C6 04 08 00 F3 04 01 FE 2E 10ms: 08 C6 04 08 00 F3 04 02 FE 2D 0ms: 08 C6 04 08 00 F2 B2 00 FD 82 10ms: 08 C6 04 08 00 F2 B2 01 FD 81 50ms: 08 C6 04 08 00 F2 B2 02 FD 80 : 08 C6 04 08 00 F2 A1 00 FD 93 : 08 C6 04 08 00 F2 A1 01 FD 92 : 08 C6 04 08 00 F2 A1 02 FD 91 : 08 C6 04 08 00 F2 A1 03 FD 90 08 C6 04 08 00 F2 B4 00 FD 80 08 C6 04 08 00 F2 B4 01 FD 7F 08 C6 04 08 00 F2 B7 00 FD 7D STX()08 C6 04 08 00 F2 B7 01 FD 7C ETX( 1)08 C6 04 08 00 F2 B7 02 FD 7B STX()+ETX( 1)08 C6 04 08 00 F2
66

ASCII
/

B7 03 FD 7A :08 C6 04 08 00 F2 AD 00 FD 87 Ctrl :08 C6 04 08 00 F2 AD 01 FD 86 ALT :08 C6 04 08 00 F2 AD 02 FD 85 EnterDownArrow:08 C6 04 08 00 F2 AD 03 FD 84
08 C6 04 08 00 F2 11 00 FE 23 08 C6 04 08 00 F2 11 01 FE 22 08 C6 04 08 00 F2 50 00 FD E4 08 C6 04 08 00 F2 50 01 FD E3 08 C6 04 08 00 F2 90 00 FD A4 08 C6 04 08 00 F2 90 01 FD A3 08 C6 04 08 00 F2 C6 00 FD 6E 08 C6 04 08 00 F2 C6 01 FD 6D 08 C6 04 08 00 F2 C7 00 FD 6D 08 C6 04 08 00 F2 C7 01 FD 6C 08 C6 04 08 00 F2 C8 00 FD 6C 08 C6 04 08 00 F2 C8 01 FD 6B 08 C6 04 08 00 F2 DE 00 FD 56 08 C6 04 08 00 F2 DE 01 FD 55 1500ms:08 C6 04 08 00 F3 03 0F FE 21 500ms:08 C6 04 08 00 F3 03 05 FE 2B 300ms: 08 C6 04 08 00 F3 03 03 FE 2D 08 C6 04 08 00 F2 C9 00 FD 6B 1s08 C6 04 08 00 F2 C9 01 FD 6A 3s08 C6 04 08 00 F2 C9 03 FD 68 5s08 C6 04 08 00 F2 C9 05 FD
67

UPC-A UPC-A UPC-A

66 7s08 C6 04 08 00 F2 C9 07 FD 64 08 C6 04 08 00 F2 C9 09 FD 62 08 C6 04 08 00 F3 10 00 FE 23 08 C6 04 08 00 F3 11 00 FE 22 08 C6 04 08 00 FF F6 00 FD 31 +07 C6 04 08 00 EB 08 FE 34 +07 C6 04 08 00 EB 09 FE 33 ++07 C6 04 08 00 EB 0A FE 32 08 C6 04 08 00 F2 CD 00 FD 67 ACK08 C6 04 08 00 F2 CD 01 FD 66 ACK08 C6 04 08 00 F2 CD 02 FD 65
07 C6 04 08 00 01 00 FF 26 07 C6 04 08 00 01 01 FF 25 07 C6 04 08 00 28 00 FE FF 07 C6 04 08 00 28 01 FE FE (00)07 C6 04 08 00 10 00 FF 17 0107 C6 04 08 00 10 01 FF 16 (02)07 C6 04 08 00 10 02 FF 15 (00)07 C6 04 08 00 22 00 FF 05 0107 C6 04 08 00 22 01 FF 04
68

UPC-A 2 UPC-A 5 UPC-A UPC-E UPC-E

UPC-E UPC-A UPC-E 2 UPC-E 5 UPC-E UPC-E1 EAN-8

(02)07 C6 04 08 00 22 02 FF 03 08 C6 04 08 00 F2 40 01 FD F3 08 C6 04 08 00 F2 40 00 FD F4 08 C6 04 08 00 F2 41 01 FD F2 08 C6 04 08 00 F2 41 00 FD F3 08 C6 04 08 00 F2 42 01 FD F1 08 C6 04 08 00 F2 42 00 FD F2
07 C6 04 08 00 02 00 FF 25 07 C6 04 08 00 02 01 FF 24 07 C6 04 08 00 29 00 FE FE 07 C6 04 08 00 29 01 FE FD (00)07 C6 04 08 00 10 00 FF 17 0107 C6 04 08 00 10 01 FF 16 (02)07 C6 04 08 00 10 02 FF 15 (00)07 C6 04 08 00 23 00 FF 04 0107 C6 04 08 00 23 01 FF 03 (02)07 C6 04 08 00 23 02 FF 02 07 C6 04 08 00 25 00 FF 02 07 C6 04 08 00 25 01 FF 01 08 C6 04 08 00 F2 3D 01 FD F6 08 C6 04 08 00 F2 3D 00 FD F7 08 C6 04 08 00 F2 3E 01 FD F5 08 C6 04 08 00 F2 3E 00 FD F6 08 C6 04 08 00 F2 3F 01 FD F4 08 C6 04 08 00 F2 3F 00 FD F5 08 C6 04 08 00 F2 15 00 FE 1F 08 C6 04 08 00 F2 15 01 FE 1E
69

EAN-8 EAN-8 2 EAN-8 5 EAN-8 EAN-8 EAN-13 EAN-13 EAN-13 2 EAN-13 5 EAN-13 EAN-13 Bookland EAN(ISBN) ISBN
Code 128

07 C6 04 08 00 04 00 FF 23 07 C6 04 08 00 04 01 FF 22 (00)07 C6 04 08 00 10 00 FF 17 0107 C6 04 08 00 10 01 FF 16 08 C6 04 08 00 F2 37 01 FD FC 08 C6 04 08 00 F2 37 00 FD FD 08 C6 04 08 00 F2 38 01 FD FB 08 C6 04 08 00 F2 38 00 FD FC 08 C6 04 08 00 F2 39 01 FD FA 08 C6 04 08 00 F2 39 00 FD FB 08 C6 04 08 00 F2 80 00 FD B4 08 C6 04 08 00 F2 80 01 FD B3
07 C6 04 08 00 03 00 FF 24 07 C6 04 08 00 03 01 FF 23 08 C6 04 08 00 F2 3A 01 FD F9 08 C6 04 08 00 F2 3A 00 FD FA 08 C6 04 08 00 F2 3B 01 FD F8 08 C6 04 08 00 F2 3B 00 FD F9 08 C6 04 08 00 F2 3C 01 FD F7 08 C6 04 08 00 F2 3C 00 FD F8 08 C6 04 08 00 F2 16 00 FE 1E 08 C6 04 08 00 F2 16 01 FE 1D (00)07 C6 04 08 00 10 00 FF 17 0107 C6 04 08 00 10 01 FF 16
07 C6 04 08 00 53 00 FE D4 07 C6 04 08 00 53 01 FE D3 10 :08 C6 04 08 00 F1 40 00 FD F5 13 :08 C6 04 08 00 F1 40 01 FD F4
70

Code 128 Code 128
GS1-128 GS1-128 GS1-128 GS1-128
ISBT 128 ISBT 128

07 C6 04 08 00 08 00 FF 1F 07 C6 04 08 00 08 01 FF 1E
060B C6 04 08 00 F5 04 06 F5 05 00 FD 2A 04 060B C6 04 08 00 F5 04 06 F5 05 04 FD 26 04 090B C6 04 08 00 F5 04 04 F5 05 09 FD 23 0B C6 04 08 00 F5 04 00 F5 05 00 FD 30
07 C6 04 08 00 0E 00 FF 19 07 C6 04 08 00 0E 01 FF 18 08 C6 04 08 00 F2 36 01 FD FD 08 C6 04 08 00 F2 36 00 FD FE
060B C6 04 08 00 F5 06 06 F5 07 00 FD 26 04 060B C6 04 08 00 F5 06 06 F5 07 04 FD 22 04 090B C6 04 08 00 F5 06 04 F5 07 09 FD 1F 0B C6 04 08 00 F5 06 00 F5 07 00 FD 2C
07 C6 04 08 00 54 00 FE D3 07 C6 04 08 00 54 01 FE D2
71

Code 39 Code 39 Code 39
Code 39 Code 39 Code 39 Full ASCII Code 39 Code 39 Code 32

07 C6 04 08 00 00 00 FF 27 07 C6 04 08 00 00 01 FF 26
06 09 C6 04 08 00 12 06 13 00 FE FA 16: 09 C6 04 08 00 12 10 13 00 FE F0 14: 09 C6 04 08 00 12 0E 13 00 FE F2 02 04 09 C6 04 08 00 12 04 13 02 FE FA 16 14 09 C6 04 08 00 12 10 13 0E FE E2 : 02 09 09 C-6 04 08 00 12 02 13 09 FE F5 0x02 0x37(55) 09 C6 04 08 00 12 02 13 37 FE C7 14 15: 09 C6 04 08 00 12 0E 13 0F FE E3 15 16: 09 C6 04 08 00 12 0F 13 10 FE E1 09 C6 04 08 00 12 00 13 00 FE F0 07 C6 04 08 00 30 00 FE F7 07 C6 04 08 00 30 01 FE F6 07 C6 04 08 00 2B 00 FE FC 07 C6 04 08 00 2B 01 FE FB 07 C6 04 08 00 11 01 FF 15 08 C6 04 08 00 F2 30 00 FE 04 08 C6 04 08 00 F2 30 01 FE 03 07 C6 04 08 00 56 00 FE D1

72

Code 32 Code93 Code 93 Code 93
Code11 Code 11 Code 11
Code 11 Code 11

07 C6 04 08 00 56 01 FE D0 07 C6 04 08 00 E7 00 FE 40 07 C6 04 08 00 E7 01 FE 3F
07 C6 04 08 00 09 00 FF 1E 07 C6 04 08 00 09 01 FF 1D
0409 C6 04 08 00 1A 041B 00 FE EC
04 0609 C6 04 08 00 1A 06 1B 04 FE E6 : 04 0909 C6 04 08 00 1A 04 1B 09 FE E3 09 C6 04 08 00 1A 00 1B 00 FE F0
07 C6 04 08 00 0A 00 FF 1D 07 C6 04 08 00 0A 01 FF 1C
0609 C6 04 08 00 1C 06 1D 00 FE E6
04 0609 C6 04 08 00 1C 06 1D 04 FE E2 : 04 0909 C6 04 08 00 1C 04 1D 09 FE DF 09 C6 04 08 00 1C 00 1D 00 FE EC 07 C6 04 08 00 34 00 FE F3 1 07 C6 04 08 00 34 01 FE F2 2 07 C6 04 08 00 34 02 FE F1 07 C6 04 08 00 2F 00 FE F8 07 C6 04 08 00 2F 01 FE F7
73

Interleaved 2 of 5 Interleaved 2 of 5/ITF/ 25 Interleaved 2 of 5
Interleaved 2 of 5 Interleaved 2 of 5 Industrial 2 of 5 Industrial 2 of 5 Industrial 2 of 5
Matrix 25 Matrix 25 25 Matrix 25

07 C6 04 08 00 06 00 FF 21 07 C6 04 08 00 06 01 FF 20
0609 C6 04 08 00 16 06 17 00 FE F2
04 0609 C6 04 08 00 16 06 17 04 FE EE : 04 0909 C6 04 08 00 16 04 17 09 FE EB 09 C6 04 08 00 16 00 17 00 FE F8 07 C6 04 08 00 31 00 FE F6 07 C6 04 08 00 31 01 FE F5 07 C6 04 08 00 2C 00 FE FB 07 C6 04 08 00 2C 01 FE FA
07 C6 04 08 00 05 00 FF 22 07 C6 04 08 00 05 01 FF 21
0609 C6 04 08 00 14 06 15 00 FE F6
04 0609 C6 04 08 00 14 06 15 04 FE F2 04 0909 C6 04 08 00 14 04 15 09 FE EF 09 C6 04 08 00 14 00 15 00 FE FC
08 C6 04 08 00 F2 20 00 FE 14 08 C6 04 08 00 F2 20 01 FE 13 08 C6 04 08 00 F2 21 00 FE 13

74

Matrix 25 Matrix 25
Standard 25 Standard 25/IATA 25/ 25 Standard 25
Codabar Codabar Codabar

08 C6 04 08 00 F2 21 01 FE 12 08 C6 04 08 00 F2 22 00 FE 12 08 C6 04 08 00 F2 22 01 FE 11
060B C6 04 08 00 F5 00 06 F5 01 00 FD 32 04 060B C6 04 08 00 F5 00 06 F5 01 04 FD 2E : 04 090B C6 04 08 00 F5 00 04 F5 01 09 FD 2B 0B C6 04 08 00 F5 00 00 F5 01 00 FD 38
08 C6 04 08 00 F2 23 00 FE 11 08 C6 04 08 00 F2 23 01 FE 10
0609 C6 04 08 00 F5 02 06 F5 03 00 FD 2E
04 0609 C6 04 08 00 F5 02 06 F5 03 04 FD 2A :
04 0909 C6 04 08 00 F5 02 04 F5 03 09 FD 27 09 C6 04 08 00 F5 02 00 F5 03 00 FD 34
07 C6 04 08 00 07 00 FF 20 07 C6 04 08 00 07 01 FF 1F
0409 C6 04 08 00 18 04 19 00 FE F0

75

Codabar Codabar NOTIS
MSI /MSI PLESSEY MSI /MSI PLESSEY MSI
MSI

09 C6 04 08 00 18 05 19 04 FE EB :
04 0909 C6 04 08 00 18 04 19 09 FE E7 09 C6 04 08 00 18 00 19 00 FE F4 08 C6 04 08 00 F2 4C 01 FD E7 08 C6 04 08 00 F2 4C 00 FD E8 08 C6 04 08 00 F2 4D 01 FD E6 08 C6 04 08 00 F2 4D 00 FD E7 07 C6 04 08 00 37 00 FE F0 07 C6 04 08 00 37 01 FE EF ABCD/ABCD08 C6 04 08 00 F2 31 00 FE 03 ABCD/TN*E08 C6 04 08 00 F2 31 01 FE 02 08 C6 04 08 00 F2 32 00 FE 02 08 C6 04 08 00 F2 32 01 FE 01
07 C6 04 08 00 0B 00 FF 1C 07 C6 04 08 00 0B 01 FF 1B
0409 C6 04 08 00 1E 04 1F 00 FE E4
04 0509 C6 04 08 00 1E 05 1F 04 FE DF :
02 0909 C6 04 08 00 1E 02 1F 09 FE DD 09 C6 04 08 00 1E 00 1F 00 FE E8 1 : 07 C6 04 08 00 32 00 FE F5 2 :07 C6 04 08 00 32 01 FE F4

76

MSI GS1 DataBar(RSS) GS1 DataBar(RSS) PDF417 PDF417 QRCode QRCode QR /
MicroQRCode DataMatrix DataMatrix /
MaxiCode MaxiCode Aztec Aztec Han Xin Code Han Xin Code

07 C6 04 08 00 2E 00 FE F9 07 C6 04 08 00 2E 01 FE F8
08 C6 04 08 00 F0 52 00 FD E4 08 C6 04 08 00 F0 52 01 FD E3
07 C6 04 08 00 0F 01 FF 17 07 C6 04 08 00 0F 00 FF 18
08 C6 04 08 00 F0 25 01 FE 10 08 C6 04 08 00 F0 25 00 FE 11 08 C6 04 08 00 F2 67 00 FD CD 08 C6 04 08 00 F2 67 01 FD CC 08 C6 04 08 00 F2 67 02 FD CB 08 C6 04 08 00 F1 3D 01 FD F7 08 C6 04 08 00 F1 3D 00 FD F8
08 C6 04 08 00 F0 24 01 FE 11 08 C6 04 08 00 F0 24 00 FE 12 : 08 C6 04 08 00 F2 6B 00 FD C9 : 08 C6 04 08 00 F2 6B 01 FD C8 : 08 C6 04 08 00 F2 6B 02 FD C7
08 C6 04 08 00 F0 26 00 FE 10 08 C6 04 08 00 F0 26 01 FE 0F
08 C6 04 08 00 F0 28 00 FE 0E 08 C6 04 08 00 F0 28 01 FE 0D
08 C6 04 08 00 F0 2F 00 FE 07 08 C6 04 08 00 F0 2F 01 FE 06

77

GS1 COMPOSITE CODE GS1 COMPOSITE CODE

08 C6 04 08 00 F2 17 00 FE 1D 08 C6 04 08 00 F2 17 01 FE 1C

78

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>