FOURKAY SW8K41H-A 4 Port 8K HDR HDMI Switch User Manual
- June 15, 2024
- FOURKAY
Table of Contents
User Manual
4 Port 8K HDR HDMI Switch
SW8K41H-A
FEATURES OF THE INTERFACE:
Picture 1.0 front panel view
| No. | Description | Introduction |
|---|---|---|
| 1 | IR receiving window | Receive the commands sent by the infrared remote |
control.
2| HDMI input indicators| The selected input channel indicator will light up.
3| HDMI output indicator| Lighting when OUTPUT port has signal output.
4| HDMI input port switch button| Short press: Loop to select the INPUT1-4
channel
Long press: Auto switch function enabled or disabled. (Enabled by default).
When the input channel led indicator flash for one time, the auto switch is
turned on; when the input channel led indicator flash for three times, the
auto switch function is closed.
5| Power status indicator| Lighting when power on.
Picture 1.1 rear panel view
| No. | Description | Introduction |
|---|---|---|
| ① | Power jack | Requires 5V power supply |
| ② | HDMI output port | Connects to TV/monitor by HDMI cable |
| ③ | HDMI input ports | Connects to your source device by HDMI cable. Supports |
four inputs.
Picture 1.2 IR panel view and function introduction
| Remote keys | Panel keys | Functional description |
|---|---|---|
| OFF / | / | Enable Standby mode |
In standby mode, all input indicators are off
ON / | SWITCH| Disable Standby mode
Press the SWITCH button to power on in standby state
1 – 4| SWITCH| Input channel selection
AUTO| AUTO| Auto switch function enabled or disabled.
Press the Panel key more than 3 seconds to enable or disable this function.
∧/∨| SWITCH| Loop to select the INPUT1-4 channel
- Please remove the battery isolation film at the rear of the remote before you use.
Connection and operation:
-
Connection Diagram
-
Installation
2.1 Connect OUTPUT port of switch to HDMI input port of TV/Monitor by HDMI cable.
2.2 Connect HDMI output port of video source (BD player, PC…) to INPUT port of switch by HDMI cable.
2.3 Connect the power adapter to the DC 5V jack of the switcher and turn on the power.
2.4 Press the SWITCH button to switch between the four input ports. -
Please Note:
3.1 The switch supports input channel ‘Auto Switch’ function. It can auto switch to the HDMI input port that has just had an HDMI source connected or auto switch to an input HDMI port that has source signal if the current HDMI input loses source signal. Press the “Auto” button on remote or panel to turn on or turn off the auto switch function.
3.2 If the signal resolution is 8K@60Hz or 4K@120 Hz then please be sure to use HDMI 2.1 standard cables that do not exceed 3m in length. Ensure you are connecting to HDMI 2.1 ports on the display and source.
3.3 The product has power off memory function – it will return to the last configuration after power on.
SPECIFICATIONS:
| Model | SW8K41 H-A |
|---|---|
| Model name | 4 Port 8K HDR HDMI Switch |
| Input ports | HDMI x 4, DC x1 |
| Output ports | HDMI x 1 |
| Video Resolution | 480p/720p/ 1080p/2160p@ 24 /25/30 /50 /60/100/ 120Hz Up to |
4320p @ 50 / 60Hz (YCC420)
Video Format| Supports HDR and Dolby Vision
Deep color| 8 / 10 / 12 / 16Bit@ 2160p 8 / 10bit @ 4320p
Audio format| Dolby HD / DTS HD / Dolby Atmos / Dolby AC3 / DTS / LPCM
Transmission bandwidth| 1G Hz Max.
Transmission rate| 40 Gbps Max.
IR distance| C5m
Input cable length| 4320p C3m, 2160p C5m, 1080p C10m
Output cable length| 4320p C3m, 2160p C5m, 1080p C10m
Power adapter specification| AC 100-240V/ DC 5V/1A
Max working current| 300mA
Working temperature range| -5 — +40t
Size| 196.2+66.6+20.8 (mm)
Weight| 265g
Accessories| Manual, Remote, Power Adaptor
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>