FOURKAY MX8K42H-A 8K HDR HDMI Matrix 4×2 User Manual
- June 14, 2024
- FOURKAY
Table of Contents
User Manual
8K HDR HDMI Matrix 4×2
MX8K42H-A
FEATURES OF THE INTERFACE:
| No. | Description | Introduction |
|---|---|---|
| ① | Mini USB port | Only for factory upgrade |
| ② | HDMI input indicators for channel A | The selected input channel indicator |
will light up.
③| HDMI output indicator for channel A| Lights when HDMI OUTA has signal
output.
④| HDMI input indicators for channel B| The selected input channel indicator
will light up.
⑤| HDMI output indicator for channel B| Lights when HDMI OUTB has signal
output.
⑥| ARC status indicator| Lights when ARC on.
⑦| IR receiving window| Receive the commands sent by the infrared remote
control.
⑧| EDID mode indicators| Include three audio EDID modes: PASS/2CH/5.1CH
⑨| Audio source channel indicator| Lighting when Audio output is homologous to
HDMI OUTA. Light off is homologous with HDMI OUTB.
⑩| Input selection key of channel A| Loop to select the input channel of HDMI
OUTA
⑾| Input selection key of channel B| Loop to select the input channel of HDMI
OUTB
⑿| ARC on/off key| HDMI ARC (Audio return channel) function on/off.
⒀| EDID mode selection key| Support three audio EDID modes : PASS / 2CH /
5.1CH.
⒁| Power status indicator| Lights when power on.
⒂| Power switch| Power self – lock switch, turn on when pressed, turn off when
bounced.
| No. | Description | Introduction |
|---|---|---|
| ① | Power jack | Requires 6-12V power supply |
| ② | HDMI output port B | Connects to monitor with HDMI port. This port also |
supports ARC.
③| HDMI output port A| Connects to monitor with HDMI port
④| HDMI input port 4| Connects to your source device by HDMI cable.
⑤| HDMI input port 3| Connects to your source device by HDMI cable.
⑥| HDMI input port 2| Connects to your source device by HDMI cable.
⑦| HDMI input port 1| Connects to your source device by HDMI cable.
⑧| Analog audio ports| Synchronized output stereo analog audio, contains left
and right channels.
⑨| Digital audio port| Synchronized output digital audio by fiber optic.
Picture 1.4 IR panel showing and function introduction
| Remote keys | Panel keys | Functional description |
|---|---|---|
| / | Power standby on/off button | |
| A-B | Press EDID key more than 3 seconds | Select A/B for the audio output |
source channel
ARC| Press ARC key| ARC turn on / turn off
PASS| Press AUDIO key| Audio EDID PASS mode.
The audio output format is determined by the EDID information of the TV.
2CH| Audio EDID 2CH mode.
Priority output stereo audio in this mode.
5.1CH| Audio EDID 5.1CH mode.
Priority output 5.1 channel bit stream in this mode. The analog output ports
have no output now.
1/2/3/4| Press A/B key| Input source selection of A/B Output Channel
ON/OFF| /| HDMI A/B output port enabled or disabled.
- Please take out the film at the rear of the remote before you use. Please insert the film to remote rear ifyou do not use the remote for long time.
Battery Type: CR2025 3V.
Connection and operation:
Please note:
- Please use standard HDMI cable and connect the cable before powering the equipment.
- Please preferentially connect 8K TV to OUTB. OUTA outputs 8K@60 or 4K@120 resolution only in split mode (In this mode, OUTA and OUTB select the same input source). The maximum output resolution is 8K@30 or 4K@60 in other modes.
- The product has power off memory function. The setting state of the output channel is recorded and saved. After the power is off, the saved data will be automatically retrieved for configuration.
- The AUDIO OUT is a set of multiplexed ports that allow you to select HDMI OUTA/B sounds by using the “A-B” key.
- The Audio EDID mode selection is also available for multiplexed. When the audio source selects channel A, the audio EDID mode is valid for channel A. When the audio source selects channel B, the audio EDID mode is valid for channel B.
- Analog audio can only be output when the audio format is LPCM, so it is recommended to choose the EDID mode in 2CH mode when using analog audio output.
- If you want to use ARC or CEC, you must connect the TV to the OUTA port. Before using ARC, make sure your TV HDMI port supports ARC and the ARC have been turned on.
SPECIFICATIONS:
|
---|---
Model name| 8K HDR HDMI True Matrix 4×2
Input ports| HDMI x 4
Output ports| HDMI x 2RCA x 2、Optical x 1
Video format| 480P/720P/1080P/2160P @ 24/25/30/50/60/100/120Hz
Up to 4320P @ 50/60Hz (YCC420), Supports HDR / Dolby Vision
Deep color| 8/10/12/16Bit@2160P
8/10bit@4320P
Audio format| Dolby HD / DTS HD / Dolby Atmos / Dolby AC3 / DTS / LPCM
Transmission bandwidth| 1GHz Max.
Transmission rate| 40Gbps Max.
IR distance| ≤5m
Input cable length| 4320P/AWG 26 ≤3m；2160P/AWG 26 ≤5m；1080P/AWG 26 ≤10m
Output cable length| 4320P/AWG 26 ≤3m；2160P/AWG 26 ≤5m；1080P/AWG 26 ≤12m
Power adapter specification| AC 100~240V/ DC 12V/1.5A
Max working current| 300mA
Working temperature range| -5 ~ +40℃
Working humidity range| 5 to 85%RH（No Condensation）
Storage temperature| -15 to 55℃
Storage humidity| 5 ~95%RH (No Condensation)
Size| 250x75x30 (mm)
Weight| 430g
Accessories| Manual, Remote, Power Adaptor
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>