Thlevel QC30 Dual USB Car Charger Socket Instruction Manual
- June 15, 2024
- Thlevel
Table of Contents
The level QC30 Dual USB Car Charger Socket
Product Specifications
- Power input: DC 9V-32V
- Input current : 10A
- Output voltage : 12V
- Output current : 6A
- Maximum power : 36W
- Output of each USB port : DC 3.6V-6.5V / 3A, 6.5V-9V / 2A, 9V-12V / 1.5A
- Cable length : 60cm
- Weight : 50g
Product Usage Instructions
Installation
- Drill a hole with about 1.13-inch diameter using a hole opener
- Unscrew the fastening nut on the USB charger.
- Place the USB charger into the drilled hole and tighten the fastening nut.
- The underside of the car USB charger is marked with + and – symbols for the positive and negative poles.
- Connect the positive pole of the battery to the + symbol on the USB charger, and the negative pole to the – symbol.
Using the USB Charger
- Make sure the power input is within the range of DC 9V-32V.
- Switch on the button to activate the USB charger.
- The LED voltmeter will display the voltage when the button is switched on.
- Connect your devices to the USB ports using the appropriate charging cable.
- For mobile phones that do not support fast charging, they will charge at normal speed.
- For mobile phones that support fast charging, it is recommended to use the original charging cable or a fast charging cable to achieve fast charging.
FAQ
Q: What is the maximum power output of the USB charger?
A: The maximum power output of the USB charger is 36W.
Q: Can I use this USB charger in a boat or motorcycle?
A: Yes, this USB charger is suitable for use in marine, boat, motorcycle, truck, and golf cart.
Q: How long is the included cable?
A: The included cable has a length of 60cm.
Q: Do I need to use the provided fuse?
A: It is recommended to use the provided wire with the 10A fuse for added protection.
Product Instruction Manual
Dual USB Car Charger Socket 36W QC3.0 USB Charger Socket Voltmeter LED Voltage with ON/OFF Switch for Marine, Boat, Motorcycle, Truck, Golf Cart
Product Features
- The level car USB charger has dual 36W QC3.0 charging ports, the port delivers the fastest charging efficiency of up to 80% in 35 minutes, 4x faster than a normal charger.
- The cable has a built-in 10A fuse, which can provide overcharge, overcurrent, overheating, and short-circuit protection to ensure safety.
- Monitor the electrical system of the vehicle, the different colors flashing on the screen indicate the different voltage conditions of the car, so that you can always know the health status of the car.
Product Specifications：
- Power input: DC 9V-32V
- Input curren t: ≤10A
- Output voltage : ≤12V
- Output current: ≤6A
- Maximum power: 36W
- Output of each USB port : DC 3.6V-6.5V / 3A, 6.5V-9V / 2A, 9V-12V / 1.5A
- Cable length : 60cm
- Weight: 50g
Package includes：
- 2x Dual Ports USB Charger
- 2x Wire with 10A fuse
How to install
- Drill a hole with about 1.13 inch, diameter by a hole opener.
- Unscrew the fastening nut, put the USB charger into the hole, and screw it tight.
- The underside of this car USB charger is marked with “+” and “-” for plus and minus poles. Simply connect “+” to the positive pole of the battery, “-” to the negative pole.
Please Note:
- The voltage only can be shown when switching on the button.
- For mobile phones that do not support fast charging, charge at normal speed.
- For mobile phones that support fast charging, you must use the original charging cable or fast charging cable to achieve fast charging.
Read User Manual Online (PDF format)
Loading......