TC Home 252 LED 36W RGB Concert Wash Light Bar User Manual

TC Home 252 LED 36W RGB Concert Wash Light Bar

TECHNICAL PARAMETERS

• Voltage: AC8 5-265V/50-60Hz
• LED: 252(84 red, 84 green,84 blue) 1 0mm LED
• Beam angle: 40 degree
• channel: 2/3/4/7/14/ 26
• Control mode: Built-in programs, stand-alone, OMX mode, music active, static color

LED DISPLAY

1. Menu
2. Up
3. Down
4. Enter
5. Display
6. Dmx in
7. Dmx Out
8. Power

UNPACKING INSTRUCTIONS

When you receive the device, unpack it, check that the contents are complete and intact, notify the carrier immediately if it shows damage, and keep all packing materials for safe transportation of the device.

• 1 power cord
• 1 lamp
• 1 instruction manual
• 2 handles
• 2 knobs

SAFETY INSTRUCTIONS AND OPERATING INSTRUCTIONS

1. Plugged into a grounded power outlet for indoor use only.

2. Don’t expose the device to rain or moisture, avoid the risk of fire or electric shock. Make sure that no flammable objects near the device.

3. Install the equipment in a well-ventilated place at least 50cm from any surface, and ensure that the ventilation slots are not blocked.

4. Disconnect the equipment from the power supply before any operation.

5. The ambient temperature should not exceed 40° C, and the maximum ambient temperature is 45° C. Don’t operate the device at higher tempratures.

6. The equipment should be stopped immediately, if a fault occurs, and do not repair the equipment by yourself. Improper maintenance can result in damage and malfunction. Contact technical support for repair approval. Only the same accessories can be used with the original parts, and make sure the power cord is not blocked or damaged.

7. Do not expose your eyes to light sources, which can be a sign of a seizure in sensitive people.

8. The lamps are only used for decoration and not suitable for ordinary household lighting.

9. Replacing the fuse: Unplug the device from the power supply, remove the fuse holder from its original position with a srewdriver, take out the burnt fuse, replace the fuse with the same characteristics, then re-rotate the screw, and connect the device to the power supply superior.

10. WARNING: Stop using it if the fuse is still blowing after being replaced. Please contact customer support for further instructions, continued use may cause serious damage.
    Please read this manual carefully before operating this product.

11. Fix the equipment with the screw holes on the bracket to ensure that the equipment is firmly fixed to prevent vibration and movement during operation, and always check whether the structure of the equipment is strong enough to withstand equipment that is at least ten times.

12. The equipment must be fixed by professionals in places that elders and children cannot reach, and no one can pass under or over the pedestrian crossing.

13. End-of-life of the product: This sign indicates that this product should not be thrown into household waste in European Community countries and that waste should be recycled to support sustainable recycling of resources in order to protect the environment and human health Utilize. If you need to recycle used electrical appliances, please go to an electrical appliance collection center or contact the dealer where you purchased the product to ensure the ecological recycling of the product.

STARTUP STEPS FOR VARIOUS MODES

1. Automatic mode:
   Press “menu” to find “auto”, press “enter”, press “up” or Down “select 0-59 self-propelled modes, and then press ” enter “to start.

2. Sound mode:
   Press “menu” to find “sound”, press “enter”, press “up” or Down “select” su0-su59 “voice control modes, and then press” enter “to start. Sound sensitivity on: press “enter” key to find “se0-se99” in the voice control mode. Press “enter” to start the sonic sensitivity. (the higher the value, the faster the speed; the lower the value, the slower the speed)

CONSOLE MODE AND MASTER­SLAVE MODE

1. Press “MENU” to find “Au01” and press “ENTER”. “Up” or “Down” key to select “Au09” or “Au1 0”,and press “ENTER” key. 2.Press “MENU” to find “Au01” and press “ENTER”.
2. Press “Up” or “Down” to select “So01” or “So02”, and press “ENTER” key.

2 CHANNEL

3 CHANNEL

4 CHANNEL

7 CHANNEL

CH1| CH2| CH3| CH4| CHS| CH6| CH?|
---|---|---|---|---|---|---|---
R| G| B| NO.| DMX value| FUNCTION| SPEED| FLASH| Master

dimmer

|
 |  |  |  | 0-11| OFF|  | 0-4 OFF|  |
 |  |  | 2| 12-23| Red|  |  |  |
 |  |  | 3| 24-35| Green|  |  |  |
 |  |  | 4| 36-47| Blue|  |  |  |
 |  |  | 5| 48-59| Yellow|  |  |  |
 |  |  | 6| 60-71| Purple|  |  |  |
 |  |  | 7| 72-83| Cyan|  |  |  |
 |  |  | 8| 84-95| White|  |  |  |
 |  |  | 9| 96-107| PROGRAM01|  |  |  |

0-255

dimming 0=OFF

| ****

0-255

dimming 0=OFF

| ****

0-255

dimming 0=OFF

| 10

11

12

| 108-119| PROGRAM02| ****

SPEED 0-255

| ****

FLASH 5-255

| ****

0-255

dimming

(0=OFF)

|
120-131| PROGRAM03|
132-143| PROGRAM04|
144-155| PROGRAM05|
 |  |  | 13|  |  |  |
 |  |  | 14| 156-167| PROGRAM06|  |  |  |
 |  |  | 15| 168-179| PROGRAM07|  |  |  |
 |  |  | 16| 180-191| PROGRAM08|  |  |  |
 |  |  | 17| 192-203| PROGRAM09|  |  |  |
 |  |  | 18| 204-215| PROGRAM10|  |  |  |
 |  |  | 19| 216-227| PROGRAM11|  |  |  |
 |  |  | 20| 228-239| PROGRAM12|  |  |  |
 |  |  | 21| 240-251| PROGRAM13|  |  |  |
 |  |  | 22| 252-255| Sound Mode| Sensitivity 0-255|  |  |

14 CHANNEL

26 CHANNEL

0-255 dimming

| ****

0-255 dimming

| ****

0-255 dimming

| ****

0-255 dimming

| ****

0-255 dimming

| ****

0-255 dimming

| 0-255

flash 0=OFF

| 0-255

Light 0=OFF

|

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>