EYEtoo G36 Dual Recordings Dash Cam User Manual
- June 16, 2024
- EYEtoo
Table of Contents
EYEtoo G36 Dual Recordings Dash Cam
INTRODUCTION
Congratulations on purchasing your Camcorder! The contents of this manual are
subject to change without notice. Note that the example screens and product
illustrations shown in this User’s Guide may differ somewhat from the screens
and configuration of the actual camera.
—————————–
The Car Camcorder integrates multi-functions of 1080P HD video capture, high
resolution photo capture and a compact form factor. It adopts video decoding
technology of high performance and compression ratios to deliver excellent
video quality. This camcorder is intended for in-vehicle shooting, which
effectively enables the collection of evidence for driving accidents, daily
life, traveling and outdoor activities. The camcorder allows you to record
video when mounted to your car’s windshield in a wide, large angle. This quick
guide explains how to use your camcorder and provides additional information,
including precautions and technical specifications. Please read through it
carefully and understand this quick guide before use. Keep it properly stored
away for reference.
Safety and Handling Precautions
- Do not take apart or attempt to service the camcorder yourself.
- Do not expose the camcorder to moisture, or extreme temperatures.
Allow the camera to warm up when moving from cold to warm temperatures.
Do not touch and put pressure on the camera lens.
Do not expose the lens to direct sunlight for extended periods.
Do not use abrasive chemicals, cleaning solvents or strong detergents to clean the product. Wipe the product with a slightly damp soft cloth.
When the camera is used for an extended period of time, it is normal for the camera body to feel warm.
Do not subject the LCD monitor to impact.
*To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.
GETTING STARTED
Overview
1 | Windshield Mount Port |
---|---|
2 | USB charging port |
3 | Display |
4 | In-Car Camera Lens |
5 | In-Car Camera IR LEDs |
6 | LED light |
7 | Speaker |
8 | Lens |
9 | Microphone |
10 | Memory Card Slot |
11 | Reset Pinhole |
12 | Power Button |
13 | OK |
14 | Left Button |
15 | Mode |
16 | Right Button |
Button and Functions Explanation
Function | Description |
---|---|
Display | Shows the current view and menu, options and different statuses of |
each mode.
Power| Press and hold for 3 seconds to power on and off. Tap once while power
is on to turn on screen, tap again to turn off the screen.
Mode| Tap once to cycle between Video, Photo and Playback modes. Press and
hold to access settings menus in each mode. During the video recording, press
to lock the current video, and then press to unlock the current video
Left | Display View| Button used during menu navigation and playback use. In
playback mode, press to quickly rewind. Tap to change the view on the LCD
Display.
OK | Record| OK button in menus. Record button in shooting modes.
Right | Record Audio| Button used during menu navigation and playback use. In
playback mode, press to fast forward. Tap to turn audio recording on and off
in video mode.
Microphone| Built-in microphone for audio capture during video recording.
USB Port| Power port and data transfer port for transferring media to your
computer.
IR LEDs| IR LEDs to aid with night vision
Windshield Mount| Mount used to connect the camcorder to your windshield.
Memory Card Slot| Storage slot for inserting your MicroSD memory card.
Speaker| Built-in speaker output for playback of video files when audio
recording is enabled.
Lens| Front capture device for all video and photo.
Reset Button| Button for power cycling your camcorder if it freezes or becomes
unresponsive.
Memory Card Insertion and Removal
- Ensure the camcorder is powered off.
- Insert a MicroSD memory card into the MicroSD card slot with the gold pins facing the display screen. Do not force it through the MicroSD card into the slot as it can only be inserted in one direction. Once successfully inserted, it will click in.
- To remove the MicroSD card, simply push the MicroSD card in and it will bounce back out of the slot. Do not remove or insert the memory card when recording.
Doing so may cause the card to become damaged or cause data loss.
Windshield Mount
The windshield mount is included for mounting your camcorder to your
windshield. Simply attach the smaller plastic end of the mount to the top of
your camcorder. Apply the suction cup side to the top of your windshield. Then
lift up on the lever that is attached to the suction cup to secure the suction
cup to the windshield. Before applying to your windshield, make sure that your
windshield is clean and free of any dirt or debris. Before removing the
suction cup from the windshield, make sure to lower the lever.
NOTE: If the suction cup loses its grip over time, thoroughly clean the
clear suction are with soap and water.
After cleaning, allow it to dry for 2 hours and reapply it to your windshield.
Mounting the Camcorder
The camcorder should be mounted on the windshield of your vehicle in a location where it does not interfere with your view through the windshield. The optimal location is to the right of or directly below the rearview mirror. When mounting the camcorder, make sure to run the power cable so that the cable does not interfere with your view through the windshield. See the diagram below. You can tuck the USB table into your car interior’s headliner and molding.
NOTE: Consult with local state laws in your area before installing your camcorder. Certain restrictions and limitations may apply to the placement of objects on the windshield of your vehicle.
Startup
-
In-Car Use
Connect the included auxiliary DC power adaptor to your car’s power port. Plug the USB plug into the camcorder’s USB port. Charging will begin immediately. Please note that the there is no battery in camcorder and need to connect with power adaptor for using. -
In-Car Camera The camcorder comes with a second built-in camera. This camera is used to record the interior of your vehicle at the same time as the front camera is recording the road in front of you. Press the LEFT button to change the view on the LCD screen to the in-car camera. Video files from the in-car camera are saved as separate files on the memory card. Simply rotate the in-car camera to change the view of the camera.
-
USB Cord / Computer Use Connect the included USB cable to a free USB port on your computer, and connect the other end of the cable into the camcorder’s USB port. The camcorder will automatically power on and show three different modes you can select from. The modes are
Mass Storage’, where you can access stored videos and images, and
PC Camera’, where the camcorder will function like a web cam, and `REC_ mode ‘ that the camcorer could be used for taking video or photo. Use the LEFT or RIGHT buttons to select your desired mode and press the OK button to enter that mode.
Your camcorder acts like a memory card reader when connected and your videos and photos stored on your camcorder memory can easily be accessed this way. To access the files on your PC, go to Start (or File Explorer) This PC and find Removable Disk. Your media will be stored in a folder on this drive.
Using the IR Night Vision Mode
This camcorder has built-in infrared (IR) LEDs for night vision recording –
giving you the ability to capture photos and videos in a dark environment.
The infrared LEDs automatically activate when the level of ambient light is
low and will turn off when the level of ambient light is high.
Note: Videos recorded in black and white cannot be changed to color.
Reset
If your camcorder freezes or becomes unresponsive, press the RESET button to
reset and power cycle the camcorder. Insert a pointy object into the reset
hole on the side body of the camcorder to fully reset it. Refer to the Section
1 of the user manual’s illustration.
USING YOUR CAMCORDER
Quick Use Instructions
Simply insert the memory card into the card slot, and insert the auxiliary
power adaptor into the camcorder’s USB port and your car’s power port. The
camcorder will automatically power on and begin recording a video file.
To start or stop recording at any time, press the OK button. You may also
remove the auxiliary DC power adaptor at any time to automatically save a
recording and power the camcorder off. Just mount it to your windshield, plug
in the power and drive!
CAMCORDER OPERATION
Once you have inserted the MicroSD memory card and plugged your camcorder into a power source, your camcorder will automatically power on and begin recording. Press the OK button to stop recording. You may also manually power your camcorder on or off by pressing the POWER button for 3 seconds. There are 3 operation modes available for use. To cycle through the different modes, simply press the MODE button. Your camcorder’s screen will show the current mode in the display’s upper left corner. Modes cannot change while a video is being recorded. The recording must stop first before changing to another mode.
Video Capture Mode
Once your camcorder powers on, it will default to Video Mode and will begin recording automatically. To start or stop recording at any time, press the OK button. Press the RIGHT button to change the view of the rear camera.
Photo Capture Mode
To capture a photo, enter PHOTO Mode by pressing the MODE button until a camera icon is show in the upper left corner of the screen. Press the OK button to instantly capture a photo.
Playback Mode
To review your video and photo files, enter PLAYBACK Mode. Press the MODE button, until a previously captured file is shown on the screen. The most recent file captured will be displayed first.
- Press the LEFT and RIGHT buttons to cycle through available playback files of photos and videos.
- To delete a file or to protect a file from deletion, press and hold the MENU button for 3S.
- Press the MODE button again to exit PLAYBACK mode.
Playing Back Video Clips
- Press the OK/Record button to play or pause a video clip in PLAYBACK mode.
- To delete a file or to protect a file from deletion, press and hold the MODE button to access the menus.
Main Screen and Icons Explanation
VIDEO MODE
- VIDEO Mode
- Collision Sensitivity
- Video Resolution
- Recording Time Remaining
- Memory Card Inserted
- Charging
- Current Time
- Current Date
- Microphone
- Exposure Value
- Loop Recording
PHOTO MODE
- PHOTO Mode
- Photo Resolution
- Number of Pictures Remaining
- Memory Card Inserted
- Charging
- Current Date
- Current Time
- Photo Quality
- ISO
- White Balance
- Exposure Value
MENU & SETTINGS INTERFACE
Video Mode Settings
Overview
Your camcorder comes preset with some user-adjustable settings to fine tune
and customize how you would like your videos to be captured. The settings are
already optimized and preset for the easiest experience.
NOTE: The settings menu cannot be accessed while the camcorder is recording a video file. If the camcorder is recording a file, you must stop recording before the settings menu can be accessed. To stop recording at any time, press the OK button.
-
Video Resolution Your camcorder has a number of preset resolution and frames per second rates. A higher resolution will produce a higher quality and lager video file.
-
In VIDEO mode, press and hold the MODE button. Select
Video Resolution’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Video Resolution’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from 1080P 1920X1080 (highest quality), 720P 1280X720(mid quality) and V G A 6 4 0 x 4 80 (lowest quality)
-
Press the OK/Record button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Loop Recording This setting allows you to set a maximum duration for each video clip recorded. Once you select an option, your camcorder will record video clips in this time interval only. Once your selected duration recording time is reached, the camcorder will end the recording and begin recording a new video file seamlessly.
-
In VIDEO mode, press and hold the MODE button. Select
Loop Recording’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Loop Recording’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Off, 1 Minute, 2 Minutes, 3 Minutes and 5 Minutes.
-
Press the OK/Record button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Wide Dynamic Range This setting allows you to turn Wide Dynamic Range on and off. WDR improves the range of color and contrast in a digital image and video
-
In VIDEO mode, press and hold the MODE button. Select
Wide Danamic Range’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Wide Danamic Range ‘ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Off and On.
-
Press the OK/RECORD button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Exposure This function adjusts the frame brightness in your video.
-
In VIDEO mode, press and hold the MODE button. Select
Exposure’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Exposure’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from +3, +2, +1, 0, – 1, -2, -3. -
Press the OK/Record button to confirm your selected setting.
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode. -
Record Audio This setting allows you to set the built-in microphone ON or OFF during a video recording. Once you select an option, your camcorder will either record audio within the video file, or record a video file without audio captured.
-
In VIDEO mode, press and hold the MODE button. Select
Record Audio’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Record Audio’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Off and On.
-
Press the OK/Record button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Date Stamp This setting allows you to imprint a date & time onto your recorded video files. Once a video file is recorded with the imprint, the imprint cannot be removed.
-
In VIDEO mode, press and hold the MODE button. Select
Date Stamp’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Date Stamp’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Off and On.
-
Press the OK/Record button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Collision Sensitivity This setting allows you to set the sensitivity level for automatic recording upon collision. When triggered or when the camcorder things a collision occurred, it will automatically begin recording and the recording will be stored with a lock icon. The video file will be locked and protected from deletion.
-
In VIDEO mode, press and hold the MODE button. Select
Collision Sensitivity’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Collision Sensitivity’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Off, Low, Medium and High.
-
Press the OK/Record button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Headlight Warning This function will alert if you forget to turn on the car’s headlights in a dark environment.
-
In VIDEO mode, press and hold the MODE button. Select
headlight Warning’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
headlight Warning’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Off and On.
-
Press the OK/Record button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode. Note: Do not rely solely on the camcorder to alert you if your car headlights are off.
-
Night Vision This setting allows you to capture photos and videos in a dark environment. When choose Auto, the infrared LEDs automatically activate when the level of ambient light is low and will turn off when the level of ambient light is high.
-
In VIDEO mode, press and hold the MODE button. Select
Night Vision’ by using the LEFT or RIGHT buttons. Press the OK/RECORD button to enter the
Night Vision’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Aut, Off and On.
-
Press the OK/RECORD button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
Photo Mode Settings
Overview
Your camcorder comes preset with some user-adjustable settings to fine tune
and customize how you would like your videos to be captured. The settings are
already optimized and preset for the easiest experience.
NOTE: The settings menu cannot be accessed while the camcorder is recording a video file. If the camcorder is recording a file, you must stop recording before the settings menu can be accessed. To stop recording at any time, press the OK/RECORD button.
-
Photo Resolution
Your camcorder has a number of preset photo resolution sizes. A higher resolution will produce a higher quality and larger file size photo. -
In PHOTO mode, press and hold the MODE button. Select
Photo Resolution’ by using the LEFT or RIGHT buttons. Press the OK/RECORD button to enter the
Photo Resolution’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from 12 Mega Pixels (highest quality), 10 Mega Pixels, 8 Mega Pixels, 5 Mega Pixels, 3 Mega Pixels, 2 Mega Pixels ,1 Mega Pixels and VGA (lowest quality).
-
Press the OK/RECORD button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Photo Quality This setting determines the level of compression the camera uses when saving photos to your memory card. A high level of compression will produce a lower quality photo, and will also use less space when saving your photos.
-
In Photo mode, press and hold the MODE button. Select
Photo Quality’ by using the LEFT or RIGHT buttons. Press the OK/RECORD button to enter the
Photo Quality’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Fine (high quality, low compression), Normal (medium quality, medium compression), and Economy (low quality, high compression).
-
Press the OK/RECORD button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Sharpness
This setting determines the visible detail of the photos being captured. -
In Photo mode, press and hold the MODE button. Select
Sharpness’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Sharpness” submenu. 1. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Strong (sharp, saturated photo), Normal (medium sharpness), and Soft (soft, duller photo).
-
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
White Blance White Balance changes the color of light in your pictures, making it seem warmer or cooler depending on how the light you’re shooting in affects the frame.
-
In Photo mode, press and hold the MODE button. Select
White Balance’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
White Balance’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Auto, Sunny, Cloudy, Daylight, Tungsten, Florescent.
-
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Color
This function sets the color filter effect of a photograph. -
In Photo mode, press and hold the MODE button. Select
Color’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Color’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from Normal, Black and White, Sepia. -
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
ISO This setting determines the light sensitivity in the photos being captured.
-
In Photo mode, press and hold the MODE button. Select
ISO’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
ISO’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Auto,100,200 and 400.
-
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Exposure This function adjusts the frame brightness in your photo.
-
In Photo mode, press and hold the MODE button. Select
Exposure’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Exposure’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from +3, +2, +1, 0, – 1, -2, -3. -
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Quick Review This setting allows you to review the photo after it’s taken before returning back to Photo Mode.
-
In Photo mode, press and hold the MODE button. Select
Quick Review’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Quick Review’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Off, 2 Seconds, 5 Seconds.
-
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Date Stamp This setting allows you to imprint a date & time onto your taken photo files. Once a photo file is recorded with the imprint, the imprint cannot be removed.
-
In Photo mode, press and hold the MODE button. Select
Date Stamp’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Date Stamp’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from Off and On. -
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
Setup Mode Settings
-
Screen Saver
This setting allows you to set the length of time before the LCD Screen turns off automatically if the camcorder does not receive any input in the form of pressing a button . -
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Select
Screen Saver’ by using the LEFT or RIGHT buttons. Press the OK button to enter the
Screen Saver’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from Off, 30 Seconds, 1 Minute and 2 Minutes. -
Press the OK button to confirm your selected setting.
-
After the selected amount of time the camcorder LCD screen will power off.
-
To exit the settings menu, press the MODE button and your camcorder will return to the main status screen of the current mode.
-
Auto Power Off
This setting allows you to set the length of time before the camcorder powers off automatically if the camcorder does not receive any input such as pressing a button or recording.
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings . -
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Select ‘Auto Power Off Delay’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘Auto Power Off Delay’ submenu.
-
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from Off, 3 Minutes, 5 Minutes and 10 Minutes. -
Press the OK button to confirm your selected setting.
-
After the selected amount of time , without any input, the camcorder will power off.
-
To exit the settings menu, press the MODE button and your camcorder will return to the main status screen of the current mode.
-
Frequency
This setting allows you to set the power frequency of your camcorder. This setting is dependent on the region that the camcorder is being used in. -
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Select ‘Frequency’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘‘Frequency’ submenu.
-
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from 50Hz and 60Hz. The default frequency for the United States is 60Hz.
-
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button and your camcorder will return to the main status screen of the current mode.
-
Beep Sound
This setting allows you to enable or disable the sound when pressing a button. -
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Select ‘Beep Sound’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘Beep Sound’ submenu.
-
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Off and On.
-
Press the OK button to confirm your selected setting
-
To exit the settings menu, press the MENU button and your camcorder will return to the main status screen of the current mode.
-
Language
This setting allows you to set the language for your camcorder’s menus. -
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Select ‘Language’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘Language’ submenu.
-
Press the LEFT or RIGHT buttons to navigate the submenu and select a language. You can select from several different languages.
-
Press the OK button to confirm your selected language.
-
To exit the settings menu, press the MODE button and your camcorder will return to the main status screen of the current mode.
-
Date & Time
This setting allows you to set a date and time for display on videos and photos. -
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Press the OK button to enter the ‘Date & Time ’ submenu.
-
The menu is presented as follows:
Date: YYYY / MM / DD
Time: HH:MM:SS (the time can only be displayed in a 24-hour format) -
Press the LEFT or RIGHT buttons to change the highlighted. When you are satisfied with the highlighted value, press the OK button to confirm that value and proceed to the next value.
-
Once you are completed, press the MODE button to save your setting and exit.
-
To exit the settings menu, press the MODE button and your camcorder will return to the main status screen of the current mode .
-
WIFI
STEP 1: Download the Smartphone App
To wirelessly operate the MNCD200NW camcorder you will need to install the “Viidure” app on your Android or iOS device. Scan the QR Code below to download the app.
STEP 2: Connecting Your Camcorder to Your Smartphone
The camcorder can be operated remotely by following the steps below:
-
In VIDEO mode, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Select ‘WIFI’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘WIFI’ submenu.
-
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
When select On, the APP QR Code will display on the screen, press the MODE button twice and your camcorder will return to the main status screen of the current mode. The Wi-Fi network name and password will be displayed on the screen. -
Go in to your smartphone’s Wi-Fi network settings menu, turn all wireless settings ON and connect to the network named “MNCD200NW” to join the network. The Wi-Fi password is 12345678.
-
To disable the camcorder’s Wi-Fi network, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings. Select ‘WIFI’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘WIFI’ submenu and select Off.
STEP 3 : App Location Settings – iOS
Once connected successfully, launch the Viidure app.
When launching the app for the first time, you will be prompted to allow the Viidure app to use your location. Select “Allow While Using App” or “Allow Always”. This will allow the app to communicate with your camcorder and will allow the app to work properly.
The app will not connect to your camcorder if you select “Don’t Allow”.
As part of the iOS operating system, your smartphone’s Location Settings must be enabled in order to allow proper communication between your smartphone and your Minolta camcorder. Selecting will prevent your camcorder from connecting to the Viidure app.
If you selected “Don’t Allow”, then you can change this setting by going into your iOS Settings, selecting the Viidure app, selecting the Location settings and select “While Using App”.
STEP 4: Operating the Viidure App
Your camcorder can now integrate with your smartphone. Upon launching the
app, you will need to connect your camcorder. Tap the “Add Camera”, this will
connect your camcorder to the app. It will initially default to the video
recording function. Follow the steps below to select modes.
Recording Videos Remotely
To start recording a video, tap the Video icon on the smartphone’s screen
to start record a video and tap again to stop the video.
Shooting Photos Remotely
1. Switch to Photo mode by tapping the Camera icon on smartphone’s screen. To capture a photo, tap the Camera icon.
To view your photos and videos on the app, tap the Camera File at the bottom
left corner of the smartphone’s screen. Tap the photo or video file you wish
to view.
To download media to your smartphone or to delete media from the camcorder,
tap “Select” at the top right corner of the smartphone’s screen. Then select
the images or videos, then select the trash icon to delete or the send icon to
download. If a photo or video is deleted on the app, it will also be removed
from the memory card in your camcorder.
Note: Any media deleted is permanent and cannot be undone.
Changing Camcorder Settings on the App
Settings can also be accessed through the app. Tap the Settings icon at the
bottom right corner of the smartphone’s screen to launch the Settings menu.
-
Format Memory Card
This setting allows you to erase all video and photo files stored on your memory card. -
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Select ‘Format Memory Card’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘Format Memory Card’ submenu.
-
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Cancel and OK.
-
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button and your camcorder will return to the main status screen of the current mode.
NOTE: Use extreme caution when accessing this setting. There is no way to recover formatted media. Once you format your memory card, the previously stored files cannot be recovered. -
Restore Default Settings
This setting allows you to reset all menu settings to the factory default settings. This function will not delete any media stored on your memory card. -
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Select ‘Restore Factory Settings’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘Restore Factory Settings’ submenu.
-
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Cancel and OK.
-
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button and your camcorder will return to the main status screen of the current mode.
-
Firmware Version
This setting displays the current firmware version of your camcorder. -
In VIDEO or PHOTO modes, press and hold the MODE button to access the settings menu. Then press the MODE button again to access the Setup mode settings .
-
Select ‘Version’ by using the LEFT or RIGHT buttons. Press the OK button to show the current firmware version.
-
Press the OK button to exit the Firmware Version .
-
To exit the settings menu, press the MODE button and your camcorder will return to the main status screen of the current mode.
Playback Mode Settings
Overview
Before you begin, ensure you are in PLAYBACK mode. From the main screen, press
the MODE button two times. The current mode will be displayed in the upper
right corner of the display. To cycle through the different modes, simply
press the MODE button again.
-
Delete
Your camcorder gives you the option of deleting your recorded video and photo files right from your camcorder. -
In Playback modes, press and hold the MODE button to access the settings menu. Select ‘Delete’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘Delete’ submenu.
-
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Delete Current and Delete All.
-
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
NOTE: There is no way to recover deleted media. Once you delete a single file or all files, they cannot be recovered. Only files that are locked are protected from deletion in PLAYBACK mode. -
Protect
Your camcorder gives you the option of protecting your recording video and photo files right from your camcorder. This will lock your files and prevent them from being deleted in PLAYBACK mode. -
In Playback modes, press and hold the MODE button to access the settings menu.
Select ‘Protect’ by using the LEFT or RIGHT buttons. Press the OK button to enter the ‘Protect’ submenu. -
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting. You can select from Lock Current, Unlock Current, Lock All and Unlock All.
-
Press the OK button to confirm your selected setting.
-
To exit the settings menu, press the MODE button twice and your camcorder will return to the main status screen of the current mode.
-
Slideshow
Photographs can be viewed as a slideshow on the camcorder. -
In Playback modes, press and hold the MODE button to access the settings menu.
-
Select ‘Slide Show’ by using the LEFT or RIGHT buttons. Press the OK/RECORD button to enter the ‘Slide Show’ submenu.
-
Press the LEFT or RIGHT buttons again to navigate the submenu and select a setting.
You can select from 2 Seconds, 5 Seconds and 8 Seconds. -
Press the OK/RECORD button to confirm your selected setting.
-
Press and hold the MODE button to end the slide show.
-
Press the MODE button to exit the submenu without making a selection.
TECHNICAL SPECIFICATIONS
Model Number | MNCD200NW |
---|---|
LCD Display Screen | 2.0 Inch LCD Screen |
Field of View | Front Lens – Wide angle 110 Degrees, In-Car Lens – 90 Degrees |
Video Resolution | Front Lens – 1080FHD, 1080P, 720P In-Car Lens – 720P |
Photo Resolution | 12 Mega Pixels; 10 Mega Pixels; 8 Mega Pixels; 5 Mega |
Pixels; 3 Mega Pixels; 2 Mega Pixels; 1.3 Mega Pixels; VGA
File Format| Picture: JPEG, Video: AVI
Loop Recording| Support
Collision Auto Recording| Support
WIFI| Support
Time & Date Stamp| Support
External Storage| MicroSD, MicroSD Card (32GB max.) – Class 10 Recommended
Languages| English, French, Simplified Chinese, Tranditional Chinese, Korean,
Japanese
USB Function| USB 2.0 Built-in
Microphone and Speaker| Built-in
FCC Radiation Exposure Statement
The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co- located for operating in conjunction with any other antenna or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This device generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this device does cause harmful interference to
radio or television reception, which can be determined by turning the device
off and on, the user is encouraged to try to correct the interference by one
or more of the following measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the device and receiver.
–Connect the device into an outlet on a circuit different from that to which
the receiver is connected.
–Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>