RIDGID R01501 18-Volt Backpack Sprayer User Manual

: June 15, 2024
: RIDGID

Table of Contents

RIDGID R01501 18-Volt Backpack Sprayer
Product Usage Instructions
IMPORTANT SAFETY INSTRUCTIONS
SPECIFIC SAFETY RULES
SYMBOLS
FEATURES
ASSEMBLY
OPERATION
MAINTENANCE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

RIDGID R01501 18-Volt Backpack Sprayer

Specifications

Product : 18V Backpack Sprayer
Model Number : R01501

Product Usage Instructions

Important Safety Instructions
Before using the product, it is important to read and understand the following safety instructions

Read and understand the operator’s manual and observe the warnings and instruction labels affixed to the tool.
Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
Do not allow bystanders or children in the area while operating this product.
This product is suitable for indoor and outdoor use. Do not expose power tools to rain or wet conditions.
Keep the sprayer and its handle dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Avoid using brake fluids, gasoline, petroleum-based products, or strong solvents to clean your tool.

Assembly
To assemble the 18V Backpack Sprayer, follow these steps

Refer to Fig. 1 for the parts diagram.
Attach the cone nozzle (A) or dual cone nozzle (I) to the wand holder (K).
Insert the wand holder (K) into the sprayer body.
Secure the wand holder (K) using the locking knob (G).

Operation
To operate the 18V Backpack Sprayer, follow these steps

Fill the sprayer tank with the desired chemical solution.
Adjust the control knob (G) to the desired spray pattern (refer to Fig. 2 and Fig. 3 for reference).
Press the trigger to start spraying.
Move the wand back and forth to cover the desired area evenly.

Maintenance
To ensure proper maintenance of the 18V Backpack Sprayer, follow these guidelines

After each use, clean the sprayer thoroughly with water to remove any chemical residue.
Inspect all parts for damage or wear. Replace any damaged or worn parts before using the sprayer again.
Store the sprayer in a clean and dry area, away from direct sunlight and extreme temperatures.

FAQ

Q: Can I use gasoline to clean the sprayer?
A: No, it is not recommended to use gasoline or any petroleum-based products to clean the sprayer. Use water and a clean cloth instead.
Q: Can I use the sprayer in rainy conditions?
A: No, the sprayer is not designed to be used in rain or wet conditions. Keep the sprayer dry to avoid any electrical or operational issues.

OPERATOR’S MANUAL
18V BACKPACK SPRAYER

To register your RIDGID product, please visit : register.ridgidpower.com

WARNING
To reduce the risk of injury, the user must read and understand the operator’s manual before using this product.

SAVE THIS MANUAL FOR FUTURE REFERENCE
See this fold-out section for all of the figures referenced in the operator’s manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING
READ THESE INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.

READ ALL INSTRUCTIONS BEFORE USING APPLIANCE

Know your chemical sprayer. Read and understand the operator’s manual and observe the warnings and instruction labels affixed to the tool.
Do not operate the product in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.
Do not allow bystanders or children in the area while operating this product. Exposure to some chemicals can be hazardous.
This product is suitable for indoor and outdoor use.
Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
Stay alert, watch what you are doing and use common sense when operating this product. Do not use while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating this product may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Use safety equipment. Always wear eye protection with side shields or goggles and a dust mask. Protect eyes, skin and lungs against drifting spray and during mixing, filling, and cleaning.
Do not overreach. Keep proper footing and balance at all times. Do not use on a ladder or unstable support. Stable footing on a solid surface enables better control of the product in unexpected situations.
Do not use the product if the switch does not turn it on and off. Any product that cannot be controlled with the switch is dangerous and must be repaired.
Store the product out of the reach of children and do not allow persons unfamiliar with the product or these instructions to operate the product.
Do not expose a battery pack or appliance to fire or excessive temperature. Exposure to fire or temperature above 265°F may cause explosion.
Keep the sprayer and its handle dry, clean and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum-based products, or any strong solvents to clean your tool. Following this rule will reduce the risk of loss of control and deterioration of the enclosure plastic.
Use this product in accordance with these instructions and in the manner intended, taking into account the working conditions and the work to be performed. Use of the product for operations different from those intended could result in a hazardous situation.
Avoid accidental starting. Ensure the switch is in the off position before inserting battery pack. Inserting the battery pack into products that have the switch on invites accidents.
Use the product only with specifically designated bat-tery packs. Use of any other battery packs may create a risk of injury and fire.
Use this product only with batteries and chargers listed in tool/appliance/battery pack/charger correlation supplement 988000-302.
When battery pack is not in use, keep it away from other metal objects like paper clips, coins, keys, nails, screws, or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire.
Under abusive conditions, liquid may be ejected from the battery, avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.
Have this product serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.
When servicing the product, use only identical re-placement parts. Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to follow Maintenance instructions may create a risk of shock or injury.
Do not let familiarity gained from frequent use of tools allow you to become complacent and ignore tool safety principles. A careless action can cause severe injury within a fraction of a second.

SPECIFIC SAFETY RULES

IMPORTANT SAFETY INSTRUCTIONS

DANGER
Risk of fire or explosion. Do not spray flammable liquids such as gasoline. Look for this symbol reference on the container.

WARNING
Some spray created from products used with the sprayer contains chemicals known to the State of California to cause cancer, birth defect of other reproductive harm. Follow directions on containers of all such products. To reduce your exposure to these chemicals, wear approved safety equipment such as face masks that are specially designed to filter out sprays, gloves, and other appropriate protective equipment.

WARNING
Before filling the tank, always remove the battery pack. Wipe up any spills before inserting the battery pack. Following this rule will reduce the risk of electric shock and corrosive liquids entering the battery pack, which can cause battery pack failure including short circuit resulting in smoke, fire, and/or serious personal injury.

WARNING
Do not allow conductive or corrosive fluids to get inside the battery pack. If conductive or corrosive fluids are spilled on the battery, refer to the instructions in your battery opera-tors manual.

Before using spray materials in this sprayer, read the label on its original container thoroughly and follow its directions. Some spray materials are dangerous and should not be used in this sprayer, as they can damage the sprayer and cause serious bodily injury or property damage.
Electric shock hazard. Never spray toward electrical outlets.
Do not pour hot or boiling liquids into the tank. These can weaken or damage the tubes or tank.
For household and outdoor use.
Spray area must be well ventilated.
Avoid spraying on windy days. Spray can be accidentally blown onto plants or objects that should not be sprayed.
Store the sprayer in a secure, well-ventilated indoor space with the fluid tank empty.
Do not use bleach or hydrogen peroxide.
Do not use alcohol based chemicals.
Do not use powders or abrasive chemicals.
Do not use caustic (alkali) or self-heating liquids in this sprayer.
Do not point the sprayer nozzle in the direction of people or pets.
Know the contents of the chemical being sprayed. Read all Safety Data Sheets (SDS) and container labels provided with the chemical. Follow the chemical manufacturer’s safety instructions. It is a violation of federal law to use an EPA-approved chemical in a manner inconsistent with its labeling.
Do not leave residue or spray material in the tank after using the sprayer. Clean after each use.
Do not smoke while using the sprayer, or spray where spark or flame is present.
To reduce the risk of fire or explosion use a liquid with a flash point higher than 140°F (60°C).
Risk of injection. Do not discharge directly against skin.
To reduce the risk of electric shock, do not put the sprayer into water or other liquid. Do not place or store the sprayer where it can fall or be pulled into a tub or sink.
Maintain this product. Thoroughly inspect both the inside and outside of the sprayer and examine the components before each use. Check for cracked and deteriorated tanks, leaks, clogged nozzles, and missing or damaged parts. If damaged, have the product repaired before use. Many accidents are caused by poorly maintained products.
Disconnect the battery from the unit before draining, cleaning, or storing the sprayer. Such preventive safety measures reduce the risk of accidental starting.
Always wear eye protection with side shields or goggles marked to comply with ANSI Z87.1. Failure to do so could result in fluids entering your eyes resulting in possible serious injury.
Protect your lungs. Wear a face or dust mask when using the sprayer. Following this rule will reduce the risk of serious personal injury. Follow the chemical manufacturer’s safety instructions and guidelines listed on the SDS sheet.

SPECIFIC SAFETY RULES

Battery tools do not have to be plugged into an electrical outlet; therefore, they are always in operating condition. Be aware of possible hazards when not using your battery tool or when changing accessories. Remove battery pack when tool is not in use. Following this rule will reduce the risk of electric shock, fire, or serious personal injury.
Do not place battery tools or their batteries near fire or heat. This will reduce the risk of explosion and possibly injury.
Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately.
Batteries can explode in the presence of a source of ignition, such as a pilot light. To reduce the risk of serious personal injury, never use any cordless product in the presence of open flame. An exploded battery can propel debris and chemicals. If exposed, flush with water immediately.
Do not charge battery tool in a damp or wet location. Following this rule will reduce the risk of electric shock.
Under extreme usage or temperature conditions, battery leakage may occur. If liquid comes in contact with your skin, wash immediately with soap and water. If liquid gets into your eyes, flush them with clean water for at least 10 minutes, then seek immediate medical attention. Following this rule will reduce the risk of serious personal injury.
Do not use battery -operated appliance in rain.
Exercise care in handling batteries in order not to short the battery with conducting materials such as rings, bracelets, and keys. The battery or conductor may overheat and cause burns
Do not dispose of the battery(ies) in a fire. The cell may explode. Check with local codes for possible special disposal instructions.
Do not open or mutilate the battery(ies). Released electrolyte is corrosive and may cause damage to the eyes or skin. It may be toxic if swallowed.
Avoid Dangerous Environment – Don’t use appliances in damp or wet locations.
Use Right Appliance – Do not use appliance for any job except that for which it is intended.
Don’t Force Appliance – It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.
Store Idle Appliances Indoors – When not in use, appliances should be stored indoors in dry, and high or locked-up place – out of reach of children.
Maintain Appliance With Care – Keep clean for best performance and to reduce the risk of injury. Follow instructions for changing accessories. Inspect appliance cord, and if damaged, have it repaired by an authorized service facility. Keep handles dry, clean, and free from oil and grease.
Check Damaged Parts – Before further use of the appliance, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting, and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless indicated elsewhere in this manual.

WARNING
Chemicals and chemical fumes can be hazardous and cause serious injury, permanent dam-age or death if ingested, inhaled or splashed in eyes or on skin. Follow the chemical manufacturer’s safety instructions and guidelines listed on the SDS sheet.

CAUTION
Keep all body parts out of the spray pattern.

SAVE THESE INSTRUCTIONS

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this product.

SYMBOL| SIGNAL| MEANING
**| DANGER:| Indicates a hazardous situation, which, if not avoided, will result in death or serious injury.
**| WARNING:| Indicates a hazardous situation, which, if not avoided, could result in death or serious injury.
**| CAUTION:| Indicates a hazardous situation, that, if not avoided, may result in minor or moderate injury.
| NOTICE:**| (Without Safety Alert Symbol) Indicates information considered important, but not related to a potential injury (e.g. messages relating to property damage).

RIDGID-R01501-18-Volt-Backpack-Sprayer-image24

FEATURES

PRODUCT SPECIFICATIONS

Tank Capacity ……………………………………………………..4 gal.
Motor ………………………………………………………… 18 Volt DC
Spray Pressure ……………………………………….. up to 105 psi

KNOW YOUR BACKPACK SPRAYER
See Figure 1.
The safe use of this product requires an understanding of the information on the product and in this operator’s manual as well as a knowledge of the project you are attempting. Before use of this product, familiarize yourself with all operating features and safety rules.
ADJUSTABLE SPRAY NOZZLES
Four nozzles are included. The fan nozzle provides a flat spray for broadcast spraying. The cone nozzle adjusts the flow of liquid from a stream to a cone spray for targeted spraying. The dual nozzle provides maximum coverage. The shower nozzle provides saturated spraying.
PUMP-FREE SPRAYING
The battery-powered sprayer keeps fluid continuously cycling through the tank to allow pump-free spraying.
TANK
The tank is marked for measuring up to 4 gallons of liquid.
TRIGGER WITH LOCK-ON
The trigger can be locked-on for continuous spraying.
WAND HOLDER
The wand can be stored two ways when carrying or storing the unit.

ASSEMBLY

UNPACKING
This product requires assembly.
Carefully remove the product and any accessories from the box. Make sure that all items listed in the Packing List are included.

WARNING
Do not use this product if any parts on the Packing List are already assembled to your product when you unpack it. Parts on this list are not assembled to the product by the manufacturer and require customer installation. Use of a product that may have been improperly assembled could result in serious personal injury.

Inspect the product carefully to make sure no breakage or damage occurred during shipping.
Do not discard the packing material until you have care-fully inspected and satisfactorily operated the product.
If any parts are damaged or missing, please call
1- 866-539-1710 for assistance.

PACKING LIST

Backpack Sprayer
Spray Wand
Trigger Handle
Nozzles (4)
Replacement Seals
Operator’s Manual

WARNING
If any parts are damaged or missing do not operate this product until the parts are replaced. Use of this product with damaged or missing parts could result in serious personal injury.

WARNING
Do not attempt to modify this product or create accessories not recommended for use with this product. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.

WARNING
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the product when assembling parts.

ASSEMBLY
CONNECTING THE SPRAY WAND TO THE TRIGGER HANDLE
See Figure 2.

Insert the spray wand into the handle as shown.
Slide the o-ring down until it touches the handle.
Slide the nut onto the handle and tighten securely.
Pull on the spray wand to be certain it is properly secured.
When not in use, place the trigger handle and wand into the storage area on the cap or on the side of the tank.

ATTACHING A NOZZLE
See Figure 3.
Four nozzles are provided with the backpack sprayer. The adjustable cone nozzle comes already attached to the 45° elbow. All of the nozzles can be used with or without the elbow. The dual cone nozzle already includes the second nozzle at a 45° angle.

Thread the elbow onto the end of the spray wand. Hand tighten.
Attach a nozzle by threading it onto the elbow. Make sure the connection is secure. Do not overtighten.
If necessary, loosen the nut holding the spray wand to the trigger handle. Rotate the wand until it is aligned with the nozzle pointing downward and ready for use.
Hand tighten. Do not overtighten.

ATTACHING THE HOSE
See Figure 4.

The hose comes preassembled to the trigger handle. If it becomes loose, follow the instructions below.

Slide the nut on the hose away from the hose end.
Place the o-ring onto the hose end as shown.
Insert the hose into the handle.
Slide the nut over the hose and onto the handle. Hand tighten. Do not overtighten.

OPERATION

WARNING
Do not allow familiarity with the product to make you careless. Remember that a care-less fraction of a second is sufficient to inflict serious injury.

WARNING
Always wear eye protection with side shields or goggles marked to comply with ANSI Z87.1. Failure to do so could result in fluids entering your eyes resulting in possible serious injury.

WARNING
Do not use any attachments or accessories not recommended by the manufacturer of this product. The use of attachments or accessories not recommended can result in serious personal injury.

WARNING
Use safety equipment. Protect your eyes, skin, and lungs while mixing, filling, spraying, and cleaning. Failure to do so may result in serious personal injury and damage to property.

NOTICE
Before each use, inspect the entire product for damaged, missing, or loose parts such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. Please contact customer service or an authorized service center for assistance.

OPERATION

APPLICATIONS
You may use this product for the purpose listed below
For use with most consumer grade home and garden chemicals such as insecticides, fungicides, weed killers and fertilizers.

WARNING
Improper application of chemicals or solutions can result in SEVERE INJURY or DEATH. Follow all CDC and EPA guidelines. Follow the chemical manufacturer’s safety instructions and guidelines listed on the SDS sheet.

FILLING THE TANK
See Figures 5 – 6. ****

WARNING
Before filling the tank, always remove the battery pack and ensure the battery cover is closed. Wipe up any spills before inserting the battery pack. Following this rule will reduce the risk of electric shock and corrosive liquids entering the battery pack, which can cause battery pack failure including short circuit resulting in smoke, fire, and/or serious personal injury.

WARNING
Always follow the chemical manufacturer’s instructions printed on their product labeling for use, cleaning, and storage. Do not combine chemicals. Clean thoroughly after each use, following the instructions in the Maintenance section of this manual. Chemicals should be stored out of the reach of children. Failure to do so may result in serious personal injury.

WARNING
Do not allow conductive or corrosive fluids to get inside the battery pack. If conductive or corrosive fluids are spilled on the battery, refer to the instructions in your battery opera-tors manual.

When adding spray solutions, you may add water and the desired chemical solution directly into the tank, or use a solution that has been premixed in a separate container, then poured into the sprayer, using a funnel if needed. For either method, remember

Liquids used must be as thin as water. Thicker liquids will not spray properly.
Do not overfill the tank.
NOTE : If using a measuring container or funnel to fill the tank, be sure to thoroughly clean and rinse these items after use. If premixing the spraying solution, rinse the container used for mixing.
To fill
Remove the battery pack.
Unscrew the cap and remove it from the tank.
Fill the tank with the desired amount of liquid (up to 4 gallons).
NOTE : To ensure proper operation of the sprayer, do not fill past the max fill line.
Screw the cap back onto the sprayer, making sure it is tightened securely.
NOTE : Wipe the outside of the tank with a dry cloth and clean up any spills.
Reinstall the battery pack.

NOTICE
It is important to thoroughly clean the unit after each use. Allowing liquid to remain in an idle tool for an extended period may cause its moving pieces and connectors to seize up.

OPERATION
INSTALLING/REMOVING BATTERY PACK
See Figure 7.

WARNING
Always remove battery pack from your tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury.

To install

Open the battery cover by releasing the latch and opening the cover.
Align the raised rib on the battery pack with groove in the battery port and place the battery pack in the tool.
Make sure the latches on each side of the battery pack snap in place and that the battery pack is secured in the tool before beginning operation.
Close the battery cover and fasten the latch to secure the cover.

To remove
Depress the latches on both sides of the battery pack to release the battery pack and remove it from the tool.

WARNING
Risk of fire or explosion. Spray area must be well- ventilated and away from sparks or flames.

TURNING THE SPRAYER ON/OFF
See Figures 8 – 9

To start the sprayer, place the ON/OFF switch in the ON ( l ) position.
Turn the control knob clockwise to increase the pressure and counterclockwise to decrease the pressure. NOTE : To apply more spray to an area, increase the pressure. To apply less spray, decrease the pressure.
To start the flow of liquid at the spray wand, squeeze the trigger.
To stop the flow of liquid at the spray wand, release the trigger.
To stop the sprayer, place the ON/OFF switch in the OFF ( O ) position.

LOCK-ON
See Figure 9.
The lock-on feature is convenient when spraying for an ex-tended period of time or when covering a large area.

To lock-on, squeeze the trigger and slide the locking tab backward.
To release the lock-on, squeeze the trigger and slide the locking tab forward.
NOTE : Make sure the trigger is not locked on before inserting the battery pack into the sprayer.

ADJUSTING THE CONE SPRAY NOZZLE
See Figure 10.

The cone spray and shower nozzles can be adjusted from a stream to a spray.

Remove the battery pack from the tool.
Loosen the nozzle for a stream.
Tighten the nozzle for a spray.

USING THE SPRAYER
See Figure 11.

WARNING
Improper application of cleaning solution can result in SEVERE INJURY or DEATH. Follow CDC and EPA guidelines for cleaning. Follow the chemical manufacturer’s safety instructions and guidelines listed on the SDS sheet.

WARNING
Risk of fire or explosion. Spray area must be well- ventilated and away from sparks or flames.

Install the battery pack into the tool.
Place the ON/OFF switch in the ON ( l ) position.
Set desired pressure.
Slip arm through harness strap and onto shoulder, then repeat for the other shoulder. Adjust the straps to a comfortable position.
Direct the sprayer nozzle directly at the surface areas you wish to treat.
NOTE : Make sure to stand far enough from the object being sprayed to prevent the spray from splashing back onto you.
Squeeze and hold the switch trigger while the unit primes. This may take several seconds. Continue holding the trigger until unit begins to spray.
Spray on a dry surface using long, even, overlapping strokes.
NOTE : While the sprayer is in use some dripping from the nozzle may occur, this is to be expected.
Release the trigger to stop the spray.
When you are finished with the sprayer, take off the shoulder harness.
Turn off the sprayer and remove the battery pack.
Unscrew the cap and remove it from the tank.
Return any unused fluid to its original container, and thoroughly clean the sprayer.
Thoroughly clean the sprayer and tank before transporting or storing the unit and before switching to a different chemical. See Cleaning the Unit later in this manual.
NOTE : Wipe the outside of the tank with a dry cloth and clean up any spills.
Thoroughly wash your hands and any area where skin has been exposed to the spray.

OPERATING TIPS

Never point the spray end of the wand at yourself or others.
Avoid spraying on windy days. Spray can be accidentally blown onto plants or objects that should not be sprayed.
Never spray in the direction of people or animals; always spray downwind.
Never smoke, eat, or drink while operating the sprayer.
Especially in warmer weather, use sprayer in the early morning or late afternoon. Excessive heat can evaporate the mist before it settles.

MAINTENANCE

WARNING
To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance.

WARNING
Always wear eye protection with side shields or goggles marked to comply with ANSI Z87.1. Failure to do so could result in fluids entering your eyes resulting in possible serious injury.

WARNING
When servicing, use only identical replacement parts. Use of any other parts may create a hazard or cause product damage.

NOTICE
Periodically inspect the entire product for dam-aged, missing, or loose parts such as screws, nuts, bolts, caps, etc. Tighten securely all fasteners and caps and do not operate this product until all missing or damaged parts are replaced. Please contact customer service or a qualified service center for assistance.

GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use. Use clean cloths to remove dirt, dust, oil, grease, etc.

WARNING
Do not at any time let brake fluids, gasoline, penetrating oils, etc., come in contact with plastic parts. Chemicals can damage, weaken, or destroy plastic which may result in serious personal injury.

MAINTENANCE

CLEANING THE UNIT
See Figure 12.

WARNING
Always store and dispose of chemicals properly. Disposal of contaminated rinse water should be performed according to local ordinances and bylaws.

DRAINING THE TANK
If there is any liquid left in the tank after spraying, the tank should be drained before cleaning.

Remove the battery pack.
Unscrew the cap and remove it from the tank.
Remove the strainer from the tank.
Drain the contents of the tank through the fill area. NOTE : Drain the contents back into the original container. Do not store chemicals in the tank.

CLEANING THE TANK AND SPRAY LINES

Fill the tank about one-third full with clean water. A small amount of mild household detergent may be added. NOTE : Never use flammable chemicals or abrasive cleaning agents to clean the tank.
Review chemical SDS sheet how best to secure and store your chemical solution when not in use.
Wipe the outside of the tank with a clean, dry cloth.
Replace the tank cap and tighten securely.
Reinstall the battery pack. Spray until the tank has been emptied. Make sure to direct the spray toward an area that will not be damaged by the spray solution.
Refill and repeat the procedure with clean water. It may be necessary to rinse the tank more than once, then drain again as directed above.
NOTE : On the last rinse, stop the pump before it runs dry. Leaving some water in the pump will help prolong its life.
Allow all pieces to completely dry before reinstalling parts and storing the unit.
NOTE : Store the sprayer in an upright position. DO NOT store the sprayer on its side.

CLEANING THE NOZZLES AND 45° ELBOW
See Figure 13.

To clean nozzles

Remove the battery pack.
Unscrew and remove the nozzle from the spray wand or 45° elbow.
Using a fine needle, free any foreign materials clogging or restricting the nozzle.
Using a garden hose, flush debris out of nozzle by back flushing (running the water through the nozzle backwards or from the outside to the inside).
Reinstall the nozzle
To clean the elbow
Remove the battery pack.
If installed, unscrew and remove the nozzle.
Push a small wire through the cross holes to clear any debris. If necessary, rinse the cross holes and elbow with clean water.
Wipe the elbow and cross holes with a clean dry cloth and reinstall the nozzle.

REPLACING SEALS
See Figure 14.

SEAL LOCATIONS

RIDGID-R01501-18-Volt-Backpack-Sprayer-image15

Fig. 14

WARNING
Always follow procedures for draining and cleaning the tank before replacing the seals. Make sure you wear rubber gloves when reaching into the chemical tank. Wash your hands thoroughly afterwards. Failure to follow these instructions can result in a rash, skin irritation, or other serious personal injury if you directly contact some chemicals.

Over time, seals can harden and crack, which can allow the backpack sprayer to leak. A set of replacement seals is included. Refer to the image shown for the location of each of the seals, then replace as needed to address any leaks that develop.
Additional sets of replacement seals can be ordered by contacting customer service.
NOTE : Unthreading the connections to replace the seals could allow liquid to escape, so always clean the backpack sprayer thoroughly as previously described before replacing the seals.

This product has a 90-day satisfaction guarantee policy, as well as a three- year limited warranty. For warranty and policy details, please go to www.RIDGID.com or call (toll free) 1-866-539-1710.

OPERATOR’S MANUAL
8V BACKPACK SPRAYER
RIDGID is a registered trademark of RIDGID, Inc., used under license.

Customer Service Information
For parts or service, do not return this product to the store; contact our service center. Please call 1-866-539-1710 or visit us online at powertools.ridgid.com. Be sure to provide all relevant information when you call or visit. A replacement parts list is also available online.
The item, manufacturing, and serial numbers of the tool are found on a plate attached to the motor housing. Please record these numbers in the spaces provided below. When ordering repair parts, always give the following information

ITEM NO.* ____ SERIAL NO.

MANUFACTURING NO.

*Model/item number on product may have additional letters at the end. These letters designate manufacturing information and should be provided when calling for service.