GLOBAL POOL PRODUCTS Side Winder Pool Slide Owner’s Manual
- June 4, 2024
- GLOBAL POOL PRODUCTS
Table of Contents
“Global Pool Products is committed to engineering and manufacturing world class products in the pool industry”
SIDE WINDER OWNER’S GUIDE
SIDEWINDER SLIDE
www.global-poolproducts.com
SLIDING HEAD FIRST IS STRONGLY DISCOURAGED AND HIGHLY DANGEROUS
Traumatic Brain Injury and/or spinal injuries can commonly result from sliding head first down a slide into shallow areas of pools. These injuries could have long-term effects or even permanent damage. It is vital to slide down with the slider in a seated position, facing forward with feet first.
Safety Compliance
Global Pool Product slides are 3rd Party Tested & Verified by St. Louis Testing Laboratories. Global Pool Product slides fully conform to the U.S. Consumer Product & Safety Commission Safety Standards for swimming pool slides (16 CFR Part 1207).
POOL SLIDE SAFETY GUIDELINES
- ADULT SUPERVISION IS ALWAYS REQUIRED WHEN CHILDREN ARE PLAYING
- ADHERE TO FOLLOWING THE SAFETY GUIDELINES
- EDUCATE ALL SLIDE RIDERS ON THE IMPORTANCE OF FOLLOWING THE SAFETY GUIDELINES USING THE SLIDE.
THE SIDEWINDER SLIDE is designed for in-ground residential swimming pools ONLY. The SIDEWINDER SLIDE must be properly assembled, installed, used, and supervised for proper use and operation to reduce the risk of serious injury and/or death.
- Position yourself properly before starting your slide ride. Slide in a seated position, forward facing, feet forward. REMEMBER: DO NOT GO HEAD FIRST DOWN A SLIDE.
- If you do not know how to swim, do not use the slide until you learn how to avoid drowning.
- No jumping or diving from any part of the slide.
- No horseplay or shenanigans on the slide.
- One person at a time on the slide; the maximum weight allowance for the slide rider is 275 lbs.
- Make sure you know how deep the water is prior to sliding.
- Look to make sure no one is swimming at the bottom of the slide before descent. Avoid collisions with other objects or swimmers and do not start sliding until the exit area of the slide is clear.
- Do not slide if under the influence of drugs or alcohol.
- Individuals with physical disabilities should be cautious and may require help using the slide.
- If you are pregnant, do not use the slide.
- If you have any medical conditions that could inhibit your reaction time, please consult your physician before using the slide.
- When going up the ladder, hold onto the molded handrails the entire time you are ascending.
- DO NOT GO ON THE SLIDE if it is deteriorated or fractured. Block the ladder access and have the slide repaired.
POST INSTALLATION CHECKLIST FOR SIDE WINDER SLIDE
Installer to review with slide owner upon completion of slide installation.
Examine:
- The flume for any apparent cracks or gashes.
- The ladder for sharp borders, snags, cracks, or gashes.
- All fasteners to make sure none are loose.
- The ladder for stability and connection to the flume.
Pool water depth at the base of the slide should be at least 3’ (914 mm)
deep.
The height of the slide flume exit above the water should be 20” (508 mm)
maximum.
The distance between the slide centerline and the edge of other pool
equipment should be at least 3’6” (1067 mm).
DAILY/WEEKLY MAINTENANCE OF THE SIDEWINDER
A. Spray your Side Winder Slide down with water to wash away build-up.
B. Be sure that all connection points are tight. If not, tighten anchors as
necessary.
C. All polyethylene parts require little maintenance. Hose and wipe to clean.
Examine:
- The flume for any apparent cracks or gashes.
- All fasteners to make sure none are loose.
- The ladder and inner flume for sharp borders, snags, cracks, or gashes.
APPLICABLE STANDARDS AND CODES
The Side Winder must be installed following your local building codes and
national building codes.
ASSEMBLY AND INSTALLATION
Side Winder Slides are inspected prior to shipment from the factory. The installer will need to make sure that the concrete pad meets the requirements before taking any steps to install the slide. Global Pool Product’s warranty will be voided if the Side Winder is not installed and constructed per the installation & assembly guide.
Side Winder Slide Placement/Stub-up Location (Right)
Side Winder Slide Placement/Stub-up Location (Left)
CLEANING INSTRUCTIONS
Use nonabrasive soap and water as often as possible.
The Side Winder is a polyethylene surface. Before using any cleaner, always
review the label instructions to make sure that it is safe to be used. We
strongly suggest that a test spot is used before using a cleaner on a large
area of the slide. This will deter any chances of damage or discoloration to
the slide.
Keep clear of any abrasive or harsh cleaners, chemicals, and/or disinfectants
that could damage the slide.
Global Pool Products Slide Warranty
All Global Pool Products slides have a 3 Year Limited Warranty on the slide components (not including the fasteners) to the original retail end user-only products manufactured by Global Pool Products, when properly installed in accordance to the assembly and installation instructions, and when the equipment is properly used and maintained, to be free from material defects and workmanship as stated below:
- Warranty starts from the date of original purchase
- Slide structure has a 3-year warranty against material defects and workmanship
This warranty does not cover damages to ANY of our slides due to: accident, abuse, negligence, misuse, damage by improper use of chemicals, fading, ice damage, fire, rust to fasteners, exceeding the weight capacity for model purchased, failure to install or to assemble the product in accordance with the installation and assembly instructions, normal wear and tear from day to day use, not maintained properly, or if the unit is altered or repaired without the written approval of Global Pool Products – All Warranties are Void.
To commence the warranty claim process of a Global Pool Products product, in writing provide the place of purchase along with the product name and description, date of installation, and a detailed description of the defect, along with a photo of the entire product and claimed defect to the dealer or distributor the Global Pool Products slide was purchased from. Prior to a 30-day period after receiving the written warranty claim from the dealer or distributor by Global Pool Products and barring any unforeseen delays, the claimant will be notified of Global Pool Products’ decision regarding the claim.
If the request is made by Global Pool Products for the product to be returned to its factory or dealer/distributor of choice for inspection and/or repair, the purchaser will be liable for “Freight Prepaid”. Global Pool Products (at its option) will replace or repair the defective item and deliver the repaired product or replacement to the buyer of the product to the destination on file in regards to the original order. Parts and Products returned for a replacement to Global Pool Products shall remain the property of Global Pool Products under this limited warranty.
A new warranty period shall not be established for any repaired or replaced products. Replaced or repaired products will remain under warranty only for the remainder of the original warranty period for the original product purchased. No person or organization is authorized to make any other specific or implied warranties on behalf of Global Pool Products.
THE WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, WHICH ARE HEREBY DISCLAIMED AND EXCLUDED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR USE.
IN NO EVENT SHALL GLOBAL POOL PRODUCTS BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL EXEMPLARY, OR PUNITIVE DAMAGES OR LOST PROFITS FROM ANY BREACH OF THIS LIMITED WARRANTY. THE SOLE AND EXCLUSIVE REMEDY OF THIS WARRANTY IN REGARDS TO GLOBAL POOL PRODUCTS PRODUCTS SHALL BE LIMITED TO REPLACEMENT OR REPAIR AT A GLOBAL POOL PRODUCTS FACILITY OR A DULY APPOINTED DISTRIBUTOR’S LOCATION OR AT A GLOBAL POOL PRODUCTS DESIGNATED LOCATION. IN NO EVENT SHALL GLOBAL POOL PRODUCTS LIABILITY EXCEED THE ENTIRE AMOUNT PAID TO GLOBAL POOL PRODUCTS BY THE ORIGINAL PURCHASER IN REGARDS TO THE DEFECTIVE OR FAILED PRODUCT.
NO REPRESENTATIVE OF GLOBAL POOL PRODUCTS SUCH AS AGENTS, DISTRIBUTORS, AND DEALERS HAS THE AUTHORITY TO ALTER IN ANY FASHION THE TERMS OF THIS WARRANTY, AND GLOBAL POOL PRODUCTS IS “NOT” RESPONSIBLE FOR REPRESENTATION, UNDERTAKING OR WARRANTY MADE BY ANY OTHER PERSON BEYOND THE WARRANTIES EXPRESSED SET FORTH IN THIS WARRANTY.
Warranty Procedure
Warranty Claims shall be submitted to Global Pool Products by the dealer or
distributor which originated the sale with Global Pool Products. All RGA
(Return Goods Authorization) documents shall be requested by and issued only
to the dealer or distributor which originated the sale.
Global Pool Products shall determine warranty coverage validation and
replacement parts or repair shall be directed to the dealer or distributor
which originated the sale. Pictures may be requested to validate the claim.
Warranty claims received from end users by Global Pool Products shall be re-
directed to the dealer or distributor which originated the sale with Global
Pool Products.
GLOBAL POOL PRODUCTS WARRANTY REGISTRATION PURCHASED BY:
Name:__
City: __ State: Zip:
Phone: (_) __
DEALER:
Name: ____Phone Number_
City: __ State: _ Zip: ___
Phone: (_) __
Model: __ Serial Number: ____
Color: ____ Purchase Price: $ Date Purchased: ___
INSTALLER:
Name: Phone Number____
City: __ State: ____ Zip:
Phone: (_) __
Model: __ Serial Number: ____
Date Installed & Assembled: ___
I have read and accept the warranty terms.
Signature: ___ Date: __
This card must be completed and returned to Global Pool Products within 30
days of the purchase date to assure coverage.
Please mail to:
Global Pool Products 1330 Pigeon Rd Bad Axe, MI 48413
Or
Complete, scan and email to:
[email protected]
Global Pool Products
1330 Pigeon Rd
Bad Axe, MI 48413
P: 989-269-5900 – TF:
866-712-0606
Fax: 989-269-5902
www.global-poolproducts.com
Information contained in this document is proprietary and confidential to Global Pool Products and not to be reproduced without written consent from Global Pool Products.