Hibay MAX.240W LED Parking Lot Light Instruction Manual

Hibay MAX.240W LED Parking Lot Light

PACKAGE INSIDE

PACKAGE INSIDE (FOR ONE PACK)

• All outside exposed screws are stainless and could not be a magnet.

Features

PRODUCT BASICS

SPECIFICATIONS

LUMINOUS INTENSITY DISTRIBUTION DIAGRAMS

DISTINGUISHED FEATURES FOR THE PRODUCT

• Dusk to Dawn Smart Photocell Not Sensitivity to Neighboring Llghhng and Only Works with Sunlight Close The Cover to Disable the Photocell Function, and Then You Can Use the Timer Switch if Needed.
• Adjustable Mount Bracket With Three Mounting Types & 180° Super Wide Angle Adjustable Angle.
• All-weather type with No Water Residue Inside the Lamp.
• Excellent heat dissipation design & High Transmittance lens

Three Wattages Selectable

Select Different Watts Based on All Kinds Installation Height

Select Different Watts Based on Diverse Brightness Need

WITH THE RELIABLE PHOTOCELL SENSOR, YOU CAN SAVE ANOTHER 20% ENERGY COMPARED TO HAND SWITCH OR TIMER SWITCH. FURTHERMORE YOU CONTROL YOUR LIGHT AUTOMATICALLY TO EVERY DAY.(YEAR 2022 FOR EXAMPLE]

ENERGY-SAVING IS A VIRTUE AND A RESPONSIBILITY

CHOOSE DIFFERENT WATTS ACCORDING TO ENERGY CONSUMPTION

Wattages| To Replace HPS/HID| Save Electricity
Equivalence (/Year)| Energy Expense Saved
Equivalence(/Year)
---|---|---|---

200W

| 5oow| 876kwh| 10.71$
220W| 600W| 1110kwh| 13.57$
240W| 800W| 1635kwh| 19.99$

ILLUMINATION PERFORMANCE COMPARED TO CONVENTIONAL HPS/HID

INSTALLATION GUIDE

Before your installation, please take the precautions as below:

• Installation shall be done by qualified technician only.
• Ensure that power is off before all operation. ( Hot-line operation is prohibited)
• Installation position should be no less than 4″ high to avoid children’s touch.
• Make sure the photocell is in an area that receives daylight and not too close to reflective surfaces.
• All screws are stainless and thus can not be magnetic. Take care of the screws during installation.

PREPARATION

Before beginning assembly of product, make sure all parts are present.
If any part is missing or damaged, do not atempt to assemble or operate the product.

Multi-Function Details

3 Wattage Selectable

• Take out the NPT plug and Push the DIP Switch to adjust the wattage according to the provided label, and insert the NPT plug back after wattage selection.

Warning

• Do NOT install any lamp above Ptiotocell

WARNING: Risk of Fire or Electric Shock

• To reduce the risk of fire, electrical shock or injury to persons; read and follow all warnings and installation instructions before installing.
• All wiring must be Installed In accordance with the Electrical Code and local electrical code.
• To prevent fire, this fixture Is rated for use In 100-277V, 50-60Hz protected circuit
• To avoid damage and/or product malfunction, do not modify the fixture or replace accessories without confirming with the supplier first
• To prevent product malfunction and/or electrical shock, this product must be properly grounded.
• To prevent wiring damage or abrasion, do not expose wiring to the edges of sheet metal or other sharp objects.

Side Installation for Round or Square Pole

WARNING: DISCONNECT POWER BEFORE INSTALLATION.

1. Remove the screws as shown in the picture.
2. Let the fixture wires go through the Bracket, and fixate the Bracket on the Fixture by tightening four screws.
3. Drill holes on the pole corresponding to the holes on the bracket, run the supply wires through Bracket, and secure the Bracket to the pole tightly.
4. Run the fixture wires through Bracket, and lock the 2 parts of Brackets tightly with an Allen Wrench.
5. Connect wires correctly with Wire Nuts, tuck wires into the bracket, and then tighten the Cover Plate with screws.
6. Loosen the Screw with an Allen Wrench, adjust the Fixture to required beam angle. Tighten the screw to complete the installation.

Head Installation for Round Pole

WARNING: DISCONNECT POWER BEFORE INSTALLATION.

1. Remove the screws as shown in the picture.
2. Let the fixture wires go through the Bracket, and fixate the Bracket on the Fixture by tightening four screws.
3. Run the fixture wires through Bracket and secure the Bracket to the Fixture tightly.
4. Connect wires correctly with Wire Nuts, and tuck wires into the pole.
5. Fixate the bracket with screws.
6. Loosen the Screw with an Allen Wrench, adjust the Fixture to the required beam angle. Tighten the screw to complete the installation.

COMMON TROUBLESHOOTING

Problems You May Encounter

WARRANTY

• FIVE-YEAR WARRANTY

FIVE-YEAR WARRANTY CARD

AFTER-SALE SERVICE

30-Day Money-Back Returning Policy

• In 30 days from the purchase, you can return the product and get a full refund for any reason.

Solid 5-Year Warranty

• In the warranty dated from the purchase, receiving your notice of quality complaint by email or other ways with simple proof, we will make an efficient replacement. (no defective return requested)

Contact Us with your Order NO

• tel: 1-877-774-3774 (Mon-fri, 9:00am-5:00pm)
• hiledservice@outlook.com
• Contact us on Amazon directly

Efficient Customer Support

• If you have any question, need of support, complaint, advice of improvement etc.., please contact us immediately. We reply in 24 hours.

QR Via Phone Camera

Documents / Resources

| Hibay MAX.240W LED Parking Lot Light [pdf] Instruction Manual
MAX.240W, MAX.240W LED Parking Lot Light, LED Parking Lot Light, Parking Lot Light, Lot Light, Light
---|---

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>