500950 FIT Charger 48V Instruction Manual

: June 15, 2024
: FIT

500950 FIT Charger 48V

Product Information

Specifications

Fit Standard Charger 48V / Fit Fast Charger 48V

Manufacturer: Biketec GmbH
Model: 500950 / 500402
Networked Customised Intelligent
Contact: T +41 62 959 53 00, [email protected], fit-ebike.com

Product Usage Instructions

Preface
Thank you for choosing the FIT Charger 48V. This instruction manual will guide you through the proper usage and maintenance of the charger. Please read this manual carefully before using the product.

About These Operating Instructions

Manufacturer: Biketec GmbH
Language: English
Declaration of Conformity: This product complies with all relevant safety regulations.
On Information: This manual provides important information about the product and its usage.
Warnings in These Operating Instructions: Pay close attention to all warnings mentioned in this manual to ensure safe operation of the charger.

Safety Instructions

General Information: Follow these safety instructions to prevent accidents and damage to the product.
Charger: Handle the charger with care and avoid exposure to water or moisture.
Rechargeable Battery: Only use compatible rechargeable batteries with the charger.

Operation

Instructions for Charger and Battery
Before using the charger, ensure that the battery is installed correctly and securely.

Charging Options
The charger offers multiple charging options depending on your needs. Refer to the product manual for specific instructions on each option.

Initial Operation
When using the charger for the first time, make sure all connections are properly secured and follow the charging instructions provided by the manufacturer.

Charging the Battery When Fitted
To charge the battery while it is still fitted in the device, connect the charger to a power source and follow the recommended charging time provided by the manufacturer.

Charging the Battery When Removed
If you prefer to remove the battery for charging, carefully detach it from the device and connect it to the charger. Follow the recommended charging time provided by the manufacturer.

Completion of Charging
Once the charging process is complete, disconnect the charger from the power source and remove the battery if necessary. Store the charger in a safe place.

Display and Settings
The charger may have a display panel that shows relevant information about the charging process. Refer to the product manual for details on how to interpret and adjust settings on the display.

Cleaning and Servicing
Cleaning the Charger: Regularly clean the charger using a soft cloth. Avoid using water or cleaning agents that may damage the device.

Troubleshooting, Fault Clearance, and Repair

Troubleshooting and Fault Clearance: If you encounter any issues with the charger, refer to the troubleshooting section in the manual for possible solutions.
Drive System or Display Does Not Start Up: If the drive system or display does not start up, consult the troubleshooting section for specific troubleshooting steps.

FAQ

Can I use the charger with any 48V battery?
The charger is designed to be used with FIT Standard Charger 48V and FIT Fast Charger 48V. It is recommended to use compatible batteries to ensure optimal performance and safety.
How do I know when the battery is fully charged?
The charger may have a charge indicator that shows the charging progress. Once the indicator shows that the battery is fully charged, you can disconnect the charger.
Can I use the charger in wet conditions?
No, the charger should not be exposed to water or moisture. Keep it in a dry and safe environment.

PREFACE

Dear FIT customer,
The FIT system offers many useful functions and options and we are pleased that you have decided to choose our system.
Please read through the operating instructions carefully to ensure you use the system safely and get off to a quick start.
We hope you enjoy discovering the FIT’s functions and have a fun ride every time you use it.
Thank you for placing your trust in FIT.
Your FIT Team

ABOUT THESE OPERATING INSTRUCTIONS

MANUFACTURER

Biketec GmbH
Luzernstrasse 84
CH-4950 Huttwil
fit-ebike.com/en-en/

LANGUAGE
The original operating instructions are written in German. A translation is invalid without the original operating instructions.

DECLARATION OF CONFORMITY

Biketec GmbH hereby declares that the products described in these operating instructions comply with EU directives.
The complete EU Declaration of Conformity is available online at: fit-ebike.com/en-en/service/declaration/

ON INFORMATION
Different markings are used in the operating instructions to make them easier to read.

WARNINGS IN THESE OPERATING INSTRUCTIONS
Warnings indicate hazardous situations and actions. You will find the following warnings in the operating instructions:

DANGER
May lead to serious or even fatal injuries if ignored. Medium-risk hazard.
CAUTION
May lead to minor or moderate injuries if ignored. Low-risk hazard.
NOTICE
May lead to material damage if ignored.

SAFETY INSTRUCTIONS

GENERAL INFORMATION

Please read all safety instructions carefully. Failure to comply with the warnings or take residual risks into account may result in electric shock, fire and / or serious injury.
Keep the operating instructions in a safe place and have them readily available to consult. Pass these instructions on if you provide your e-bike for someone else’s use.
The generic names used in these operating instructions, such as motor, battery and operating element, all refer to original FIT e-bike components.

CHARGER

Do not expose the charger to rain or damp. If water penetrates into a charger, there is a risk of electric shock.
Charge FIT Li-ion batteries approved for e-bikes with the FIT charger only. The battery voltage must match the charger’s battery charge voltage; there is a risk of fire and explosion if it does not. Keep the charger clean. Dirt can pose an electric shock hazard.
Check charger, cable and connector before use. Do not use the charger if you spot any damage. Do not open up the charger. Damaged chargers, cables and plug connectors increase the risk of electric shock.
Do not use the charger on a highly flammable surface (e.g. paper, textiles, etc.) or in flammable surroundings. There is a risk of fire due to the charger heating up during charging.
Take care if you touch the charger during charging. Wear protective gloves. The charger can become extremely hot, particularly at high ambient temperatures.
The e-bike battery must not be left unattended while it is charging.
Supervise children during use, cleaning and maintenance. You must ensure that children do not play with the charger.
Children and persons who are not able to use the charger safely due to their limited physical, sensory, or mental capa-bilities, or lack of experience and / or knowledge must not use it unsupervised or without instruction by a responsible person. If not, there is a risk of incorrect use and injury.

RECHARGEABLE BATTERY

Remove the battery from the e-bike before you start working on the e-bike (e.g. inspection, repair, fitting, mainte-nance, work on the chain), transport it by car or plane or if you are not going to use it for extended period of time. There is a risk of injury if the e-bike system is activated unintentionally.
Do not open up the battery as you risk causing a short circuit.
Protect the battery from heat (e.g. including continuous direct sunlight), fire and being submerged in water. Do not store or operate the battery in close proximity to hot or flammable objects as this pose a risk of explosion.
Keep the unused battery away from paper clips, coins, keys, nails, screws or other metal objects which could cause an electrical arc between the contacts. A short circuit between the battery contacts can cause fire or burns.
Avoid any physical loads on the battery. They may inflict damage to the battery cells and cause flammable substances to leak out.
Do not put the charger and battery down next to flammable materials. Only charge batteries when they are dry and in a fireproof place. There is a risk of fire due to heat accumulating during charging.
The e-bike battery must not be left unattended while it is charging.
If the battery is used incorrectly, liquid may leak from it. Avoid coming into contact with the liquid. Rinse off with water in the event of accidental contact. If the liquid gets into eyes, seek medical attention. Leaked liquid can cause skin irritation and burns.
Vapours may be emitted if the battery is damaged or used improperly, ventilate with fresh air and consult a doctor if you suffer any pain or discomfort. The vapours can irritate the airways.
Charge the battery with original FIT chargers only. Risk of fire cannot be ruled out if non-original FIT chargers are used.
Use the battery in e-bikes with the FIT system only. This is the only way that the battery will be protected from dan-gerous overloading.
Only use original FIT rechargeable batteries which the manufacturer has approved for your e-bike. Using other bat-teries can result in injuries and risk of fire. FIT accepts no liability and offers no warranty if other batteries are used.
Keep the battery away from children.
Our e-bike rechargeable batteries are lithium-ion batteries which are developed and manufactured to the latest tech-nical standards. Lithium-ion batteries have a high energy content when charged. In the event of a defect, possibly not visible on the outside, lithium-ion batteries may catch fire in very rare instances and under unfavourable conditions.

PRODUCT AND TECHNICAL SPECIFICATIONS

FIT STANDARD CHARGER 48V / FIT FAST CHARGER 48V

500950-FIT-Charger-48V-fig-2

Charger plug
Charge indicator
Charger
Type label
Mains cable device plug
Device plug

PROPER USE
All check lists and instructions for actions in these operating instructions met. The charger is intended for charging FIT batteries approved for its use only and must not be used for other purposes.

IMPROPER USE
Improper use refers to use which is not described under proper use or goes beyond proper use.

TECHNICAL DATA

**FIT STANDARD CHARGER 48V / FIT FAST CHARGER 48V

500950-FIT-Charger-48V-fig-3

**

OPERATION

INSTRUCTIONS FOR CHARGER AND BATTERY
The nameplate on the charger points to warnings and other safety information to bear in mind when handling the battery charger.

Only use the charger included in the scope of delivery of your e-bike. This is the only charger suited to the Li-ion battery used in your e-bike.
Fully charge the battery with the charger before you first use it to ensure full power from the battery.
Do not connect the charger to the socket immediately after a sudden temperature change from cold to warm. There is a possibility of condensation forming on the contacts and then causing a short circuit. Wait until both charger and battery reach room temperature before connecting the charger or battery.
The battery can be charged directly or in the e-bike without shortening its service life. Interrupting the charging process does not damage the battery.
The battery is fitted with a temperature monitoring system, which only allows charging within the stipulated temperature range.

CHARGING OPTIONS
The battery can be charged while inserted in the e-bike or after it has been removed. Look in the e-bike manufacturer’s original operating instructions to find where the e-bike charging socket is. Connect the charger to the e-bike charging socket (or directly to the battery) to charge. The charge indicator will automatically appear on the e-bike display screen if the battery is fitted into the e-bike. The display backlight will go out after a certain period of time. However, you can press the On-Off button to switch it back on again at any time.

INITIAL OPERATION
CAUTION
Check the mains voltage is correct. The voltage must match the voltage indicated on the charger nameplate.
Insert the plug on the enclosed mains cable into the socket on the charger. Connect the mains cable to the mains. Only charge the battery in compliance with all safety instructions. If this is not possible when the battery is installed, remove it from the e-bike and charge it somewhere suitable. Follow the operating instructions for the battery used.

CHARGING THE BATTERY WHEN FITTED
Connect the charger to the e-bike charging socket to charge. The battery level indicator will automatically appear on the display. The display backlight will go out after a certain period of time. However, you can press the On-Off button to switch it back on again at any time.

CHARGING THE BATTERY WHEN REMOVED
Before removing the battery, ensure that you have configured the required charge mode. You cannot change the charge mode when charging a battery that has been removed. Connect the charger to the battery charging socket to charge.

COMPLETION OF CHARGING
After charging is complete, disconnect the charger from the mains and the battery from the charger.

DISPLAY AND SETTINGS

CHARGE INDICATOR

500950-FIT-Charger-48V-fig-4

CLEANING AND SERVICING

CLEANING THE CHARGER

CAUTION
Fire and short circuit caused by water ingress
- The charger is not protected against water. Penetration by water can cause a short circuit. Never clean the charger with a pressure washer, water jet or compressed air.
- Keep contacts dry and clean.
- Never immerse the charger in water.
- Never use cleaning agents.
- Disconnect charger from the battery and power supply before cleaning.
NOTICE
- Never clean the charger with solvents, such as oil, thinners, alcohol or corrosion protection.
- Clean the charger’s electrical connections with a dry cloth or paintbrush only.
- Wipe off the decorative sides with a damp cloth.

TROUBLESHOOTING, FAULT CLEARANCE AND REPAIR

TROUBLESHOOTING AND FAULT CLEARANCE

DRIVE SYSTEM OR DISPLAY DOES NOT START UP
If the display and / or the drive system do not start up, proceed as follows:

Check whether the battery is inserted correctly. If it is not, insert the battery correctly.
Start the drive system.
If the drive system won’t start, remove the battery.
Clean all the contacts with a soft cloth.
Insert the battery.
Start the drive system.
If the drive system won’t start, remove the battery.
Fully charge the battery.
Insert the battery.
Start the drive system.
If the drive system won’t start, press the on-off button (operating element) for at least 8 seconds.
If the drive system does not start after about 6 seconds, press the On-Off button (operating element) for at least 2 seconds.
Contact your specialist dealer if the drive system does not start.

BATTERY ERROR

500950-FIT-Charger-48V-fig-5 500950-FIT-
Charger-48V-fig-6

REPAIR
Special expertise and tools are required for many repairs. That is why only a specialist dealer may perform repairs.

ORIGINAL PART
The individual e-bike parts have been carefully selected and matched to one other. Only original parts must be used for maintenance and repair. Observe the operating instructions for the new components.
REPLACING THE LIGHTS
Replace components with ones in the right power class.
ADJUSTING THE HEADLIGHT
The headlight must be positioned so that its beam hits the road surface 10 m in front of the e-bike.

RECYCLING AND DISPOSAL

DISPOSAL

Mechanical and electrical devices, accessories and packaging should be taken for recycling in compliance with environmental standards. Do not dispose of them in the household waste.
For EU countries only: According to the European Directive 2012/19/EU, 2006/66/EC and their implemen-tation in national law, waste electrical and electronic equipment, batteries and rechargeable batteries that are defective or can no longer be used must be collected separately and recycled in compliance with envi-ronmental standards.