ideal IZ8801 Hair Dryer Instruction Manual

: June 15, 2024
: IDEAL

Table of Contents

SAFETY INSTRUCTIONS
OPERATING INSTRUCTION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

**ideal IZ8801 Hair Dryer Instruction Manual

**

The disposal of used electrical and electronic equipment (applies to European Union countries and other European countries with separate waste- collection systems).
This symbol on the product or its packaging indicates that it should not be classified as household waste. It should be handed over to an appropriate company dealing with the collection and recycling of electrical and electronic equipment. The correct disposal of the product will prevent potential negative consequences for the environment and human health resulting from hazardous substances present in the product. Electrical devices must be handed over to restrict their re-use and further treatment. If the device contains batteries, remove them, and hand them over to a storage point separately.
DO NOT THROW EQUIPMENT INTO THE MUNICIPAL WASTE BIN. Material recycling helps to preserve natural resources. For detailed information on how to recycle this product, please contact your local authority, the recycling company, or the shop where you bought it.

SAFETY INSTRUCTIONS

Before first use, please thoroughly read the entire manual.
It is recommended to keep this instructions manual for future reference.

This equipment can be used by children of at least 8 years of age and by people with reduced physical and mental capabilities and lack of experience and knowledge of the equipment, if supervision or instruction is provided on how to use the equipment safely so that the associated risks are understood. Children should not play with the equipment.
Unsupervised children should not carry out cleaning or maintenance of the equipment. Do not allow the cord to hang where a child can grab it. Children should be supervised to ensure that they do not play with the equipment.
To provide additional protection, it is advisable to install a residual current device (RCD) with a rated residual trip current not exceeding 30mA in the electrical circuit supplying the bathroom. A specialist electrician should be consulted in this respect.
The connection cable must be connected to a socket with the parameters specified in the instructions.
Always disconnect the appliance from the mains by pulling on the plug and not on the power cord.
Do not immerse the cable or the appliance in water.
Do not use in the open air.
Do not expose the device to sunlight, hot surfaces or moisture.
When the appliance is used in the bathroom, unplug it from the mains after use, as the proximity to water is a hazard even when the appliance is switched off.
Before switching on the appliance, make sure that all its components are properly assembled.
Do not leave the appliance in use unattended.
Switch off the appliance before unplugging it from the mains and mounting and dismounting accessories.
Always disconnect the appliance from the power supply when finished working.
Do not handle the appliance with wet hands.
When the appliance is in operation, do not cover or otherwise block the air inlet and outlet openings. If the air openings are blocked, the overheating protection will automatically trip. Turn the switch to the “0” position and disconnect the unit from the mains. Once the unit has cooled down (a few minutes), it can be switched on again.
Disconnect the appliance from the mains before cleaning.
Do not exceed the permissible duration of continuous operation of the appliance.
Do not use if the power cord is damaged, if the appliance has fallen or has been damaged in any other way. Have the unit repaired by an authorised service centre; see the warranty card andwww.eldom.eu for information. Any upgrade or use of non-original spare parts or components of the appliance is prohibited and compromises the safety of use.
The appliance may be used only with the originally supplied accessories.
The company Eldom Sp. z o.o. shall not be liable for any damage caused by inappropriate use of the appliance.

WARNING: Improper use of the appliance may cause injury.
WARNING This appliance is designed for domestic use only;
when used for industrial purposes outside the product’s specifications, or used not in accordance with the instructions, no liability is assumed and the warranty is nullified.
WARNING
Plastic bag can be dangerous, to avoid danger of suffocation keep this bag away from babies and children.

Caution: Do not use this appliance near baths, showers, swimming pools and similar containers with water.

OPERATING INSTRUCTION

GENERAL DESCRIPTION

On/Off switch with power settings
Heat level switch
Cool shot”
Styling nozzle
Removable air intake housing
Hang up loop
Power cord
Diffuser

TECHNICAL DETAILS

power: 2000W
mains supply: 220-240V~ 50-60Hz

INTENDED USE

The dryer IZ8801 is designed for drying hair.
OPERATION

Before connecting the hair dryer to the power source, make sure that the switch (1) is set to position “0”.
After connecting the appliance to the mains with the parameters as specified in the manual, start the appliance with the switch (1).
pos. “0” – dryer switched off,
pos. weak airflow,
pos. strong airflow
Adjust air temperature using the switch (2):
pos. “ ” – low temperature for slightly damp, not too thick or short hair,
pos. “ ” – medium temperature,
pos. “ ” – high temperature, fast drying of wet or thick hair.
Pressing and holding the “ ” button (3) immediately lowers the temperature of the air coming out of the dryer regardless of the temperature selected with the switch (2).
The concentrator (4) and diffuser (8) facilitate hair modelling. The tips (4) and (8) should be used interchangeably. You can also use the hair dryer without the tips (4) or (8) in place.

CLEANING AND MAINTANANCE

Before cleaning unplug the hair-dryer and wait until it cools down completely.
Never immerse the hair-dryer in water.
Casing and power cord can be cleaned with soft dry or slightly damp cloth.
The air inlet and outlet should be cleaned with soft brush.
Air intake can be cleaned after the removal of the housing (5).
In order to remove the housing (5), you should press the elements and move it forward.

WARRANTY